Construction Emergency Battery Pack Option Controls ...

1 Metalux Safe and convenient means of disconnecting powerCatalog # Type Date Project Comments Prepared by SPECIFICATION FEATURESC onstructionHousing consists of die formed cold rolled steel with decorative white opaque injection molded end plates. Reflector/channel wireway cover secured by fasteners for easy wireway access. Channel back has numerous KO s for easy installation. ControlsThe SWLED is Powered by Fifth Light, with a standard 0-10V continuous dimming driver that works with any 0-10V control/ dimmer. Combine with energy saving products like occupancy sensors, daylighting Controls and lighting relay panels to maximize energy savings.

2 In addition, the SWLED can include a factory-installed integrated sensor system for occupancy and daylight dimming control and manual control from an optional handheld remote. Or, specify the Digital Addressable Lighting Interface (DALI) drivers (consult factory for 1% dimming), for use with Fifth Light Controls . See ordering information for details on all three LED system coupled with electrical driver to deliver optimal performance. LED s available in 3500K, 4000K or 5000K with a typical CRI 85. Projected life is 60,000 hours at 70% lumen output.

3 Electronic drivers are available for 120-277V applications. A 0-10V dimming driver is Battery pack OptionOptional 120v-277v integral Emergency Battery pack is available in 7-watts or 14-watts to meet critical life-safety lighting requirements. The 90-minute batteries provide constant powerto the LED system, ensuring code-compliance. A test switch/indicator button can be tested safely from the ground using a laser pointer, while the patented EZ Key prevents accidental discharge of the Battery during Construction . See ordering information for reflective post painted finish (PAF) standard offering customers the optimal finish and handling.

4 Additionally, each housing is treated in a multistage iron phosphate pretreatment, insuring maximum bonding and rust inhibitor. ShieldingSpecially designed LED lens blends and linear optics allows us to offer three different lens versions - LC (clear), LN (Semi-Frost with narrow distribution) and LW (full frost with wide distribution). This lenses provide different lighting distribution allowing customers to choice between smooth even illumination. Lens is securely held in place by removable injection molded white end caps that can be easily removed for installation and may be surface (wall or ceiling) and suspended mounted.

5 See accessories below for ordering are UL recognized components and indoor luminaires are cULus listed for up to 40 C ambient environments, RoHS compliant, and LED modules comply with IESNA LM-79 and LM-80 standards. DesignLights Consortium Qualified and classified for DLC Standard, refer to for and Wall LEDADF1423522016-09-27 07:58:10 SWLED is a versatile LED surface or wall mount luminaire which can be used in a broad range of commercial and industrial series provides customers with a high quality luminaire utilizing the latest LED, solid state lighting and electronic driver technology for optimal performance and maximized energy efficiency.

6 Offered with three different lens distributions and three different lens options which provides uniform light distribution that is an ideal choice for general purpose lighting where customers want to move away from traditional fluorescent DATAcULus - 1598 Damp Location ListedLM79/LM80 CompliantROHS CompliantDesignLights Consortium QualifiedNOM Compliant4-11/16"[120mm]4-1/2" [114mm]4-11/16"[120mm]52" [1320mm]45-3/16" [1148mm]Lensed4'2'4-11/16"[120mm]21-3/16 " [538mm]Lensed28" [711mm]MOUNTING DATA DESIGN JOURNALPLATINUM2016 Specifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: 07:58.

7 10 Lens TypeLumen TypeLengthCatalog LogicNominal LumensWattagelm/WFull Frost (LW)Standard2 Frost (LW)Standard2 Frost (LW)Standard2 Frost (LW)High2 Frost (LW)High2 Frost (LW)Standard4 Frost (LW)Standard4 Frost (LW)Standard4 Frost (LW)Standard4 Frost (LW)Standard4 Frost (LW)Standard4 Frost (LW)High4 Frost (LW)High4 Frost (LW)High4 0 Full Frost (LW)High4 Frost (LW)High4 Frost (LW)High4 Frost (LW)High4 and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: (13)SWLED=LED Surface and WallSAMPLE NUMBER: 4 SWLED-LD4-40SL-LW-UNV-L840-CD1-SVPD2-ULE D TypeLD4=LED 4.

8 0 LED Lumens Output (2)8SL=800 (3)16SL=1600 (3)20SL=200024HL=2400 (3)28HL=2800 (3)28SL=2800 (4)32SL=320036SL=360040SL=400044HL=44004 8HL=480052HL=5200 (12)56HL=5600 (12)60HL=6000 (12)64HL=6400 (12)67HL=6700 (12), (16)72HL=7200 (12), (16)78HL=7800 (12), (16)80HL=8000 (12), (17)Voltage347V=347 Volt (11)480V=480 Volt (11)UNV=UniversalVoltage 120-277 (1)UNC=UniversalVoltage347/480 (4), (11) Driver TypeCD=0-10V Dimming DriverHCD=0-10V Dimming Driver(1% - 100% Dimming) (11)SD=Step-dim Driver (19), (20)5 LTD=Fifth Light (DALI) DriverNumber of Drivers1=1 Driver2=2 DriversOpticLC=Clear Lens LN=Semi-Frost Lens - Narrow LW=Full Frost Lens - Wide Length2=2 ft.

9 Length4=4 ft. LengthNOTES: (1) Not available when specifying emergencies, voltage must be specific. (2) Nominal lumen output. (3) 2 ft. model. (4) Only available in 4 ft. models. (5) With integral test switch/indicator/laser test. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the Emergency Battery pack (100 lm/W x 7=700 lumens). IES-format photometry for luminaire under Emergency operation available. (6) For mounting heights up to 8 ft. (7) For mounting heights up to 30 ft. (8) For mounting heights up to 12 ft.

10 (9) Integral EL Battery pack is rated for 35 C. (10) Product configuration meet ADA. (11) Consult factory. (12) Currently not DLC listed, consult factory. (13) DesignLights Consortium Qualified and classified for DLC Standard (some models are not DLC qualified), refer to for details. (14)For wall mount applications. (15)For use with CD driver only. (16)Lumen value with LN (30% Frost lens). (17)Lumen value with LC (Clear lens). (18)Used to transfer fixture to secondary power source for life-safety operation. When used with a dimming fixture, two devices are required to ensure control is disabled while operating under Emergency power.