Example: air traffic controller

ControlLogix Enhanced Redundancy System, Revision 20.058 ...

Release NotesControlLogix Enhanced Redundancy System, Revision Module Catalog Numbers1756-RM, 1756 -RMXT, 1756 -RM2, 1756 -RM2 XTController Catalog Numbers1756-L61, 1756 -L62, 1756 -L63, 1756 -L63XT, 1756 -L64, 1756 -L65, 1756 -L71, 1756 -L72, 1756 -L73, 1756 -L73XT, 1756 -L74, 1756 -L75 Communication Module Catalog Numbers1756-CN2/B, 1756 -CN2/C, 1756 -CN2R/B, 1756 -CN2R/C, 1756 -CN2 RXT/B, 1756 -CN2 RXT/C, 1756 -CN2RK/C, 1756 -EN2T, 1756 -EN2TR, 1756 -EN2 TXT, 1756 -EN2 TRXT, 1756 -EN2 TRK/C, 1756 -EN2TK/D, 1756 -EN2F/A, 1756 -EN2F/B, 1756 -EN2F/CIMPORTANTT hroughout this publication, the following applies:Ethernet Communication Modules References to the 1756 -EN2T/B and 1756 -EN2TR/B (or earlier) modules also apply to the 1756 -EN2 TRXT/B (or earlier) modules.

Jan 14, 2000 · Replace a Module in the Secondary Chassis That Has the Same Catalog Number and Firmware Revision 34 Replace 1756-EN2T, 1756-EN2TR, or 1756-EN2F Modules 35 Replace 1756-CN2 Modules 41 Update the RSLogix 5000 Software Version and Replace 1756-EN2T, 1756-EN2TR, or 1756-CN2 Modules 45 Update the Firmware by Using Redundancy System …

Tags:

  Chassis, 1756, Redundancy

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of ControlLogix Enhanced Redundancy System, Revision 20.058 ...

1 Release NotesControlLogix Enhanced Redundancy System, Revision Module Catalog Numbers1756-RM, 1756 -RMXT, 1756 -RM2, 1756 -RM2 XTController Catalog Numbers1756-L61, 1756 -L62, 1756 -L63, 1756 -L63XT, 1756 -L64, 1756 -L65, 1756 -L71, 1756 -L72, 1756 -L73, 1756 -L73XT, 1756 -L74, 1756 -L75 Communication Module Catalog Numbers1756-CN2/B, 1756 -CN2/C, 1756 -CN2R/B, 1756 -CN2R/C, 1756 -CN2 RXT/B, 1756 -CN2 RXT/C, 1756 -CN2RK/C, 1756 -EN2T, 1756 -EN2TR, 1756 -EN2 TXT, 1756 -EN2 TRXT, 1756 -EN2 TRK/C, 1756 -EN2TK/D, 1756 -EN2F/A, 1756 -EN2F/B, 1756 -EN2F/CIMPORTANTT hroughout this publication, the following applies:Ethernet Communication Modules References to the 1756 -EN2T/B and 1756 -EN2TR/B (or earlier) modules also apply to the 1756 -EN2 TRXT/B (or earlier) modules.

2 References to the 1756 -EN2T/C and 1756 -EN2TR/C (or earlier) modules also apply to the 1756 -EN2 TRXT/C (or earlier) modules. References to the 1756 -EN2T/D and 1756 -EN2TR/D modules also apply to the 1756 -EN2 TRXT/D Communication Modules References to the 1756 -CN2/B modules also apply to the 1756 -CN2R/B, 1756 -CN2 RXT/B modules. References to the 1756 -CN2/C modules also apply to the 1756 -CN2R/C, 1756 -CN2 RXT/C, 1756 -CN2RK/C modules. References to catalog numbers 1756 -RM, 1756 -RM2, 1756 -RMXT, and 1756 -RM2XT refer to any series of the Automation Publication 1756 -RN694P-EN-P - February 20182 ControlLogix Enhanced Redundancy System, Revision release notes describe enhancements, corrected anomalies, known anomalies, restrictions.

3 And application notes for the Enhanced Redundancy system Revision or Release NotesProduct release notes for the individual products that are part of this ControlLogix Enhanced Redundancy bundle are available online within the Product Compatibility and Download example, you can access release note information specific to the 1756 -EN2T ControlLogix EtherNet/IP more information on product release notes, see the Product Compatibility and Download Center (PCDC) at: cPageProduct Release Notes2 About This Enhanced Redundancy Firmware Bundle3 Compatible Software Versions6 About the Redundancy Module Configuration Tool7 These enhancements have been made in previous firmware Anomalies10 Known Anomalies16 Restrictions19 Application Notes22 Update the RSLogix 5000 Software Version32 Replace a Module in the Secondary chassis That Has the Same Catalog Number and Firmware Revision34 Replace 1756 -EN2T, 1756 -EN2TR.

4 Or 1756 -EN2F Modules35 Replace 1756 -CN2 Modules41 Update the RSLogix 5000 Software Version and Replace 1756 -EN2T, 1756 -EN2TR, or 1756 -CN2 Modules45 Update the Firmware by Using Redundancy System Update48 Update IP Address Set Via Software to Address Set Via Rotary Switches68 Replace 1756 -RM/B (or Earlier) Modules with 1756 -RM2 Modules72 Storing a Project to a Nonvolatile Memory Card While Your Process Is Running73 Additional Resources76 Rockwell Automation Publication 1756 -RN694P-EN-P - February 2018 ControlLogix Enhanced Redundancy System, Revision 3 About This Enhanced Redundancy Firmware BundleThis Enhanced Redundancy firmware bundle, which is identified as Revision , contains series firmware revisions for each of the modules that are listed in Ta b l e 1.

5 Required Series and Firmware Revisions for Components Used in an Enhanced Redundancy System, Revision can download the firmware bundle at the Product Compatibility and Download Center: addition to information specific to the most recent firmware Revision , the information from previous minor revisions is retained in these release strongly recommend that you review the information that is provided regarding previous firmware revisions. We recommend that you do so because if you are updating your firmware through multiple previous revisions, all information specific to all revisions is Enhanced Redundancy system Revision includes the following.

6 Support using the 1756 -CN2/C, 1756 -CN2R/C, 1756 -CN2 RXT/C, 1756 -CN2RK/C modules with firmware Revision Support using the 1756 -EN2F/C modules with firmware Revision you design, install, and operate the redundant chassis pair (RCP) for this Enhanced Redundancy system Revision , you can use only the modules that are specified in Ta b l e 1, Required Series and Firmware Revisions for Components Used in an Enhanced Redundancy System, Revision , remember that the series and firmware Revision requirements listed apply only to components used in the redundant chassis pair.

7 Not to components used with the Redundancy system outside the redundant chassis 1 - Required Series and Firmware Revisions for Components Used in an Enhanced Redundancy System, Revision Cat. DescriptionSeriesFirmware Revision1756-CN2 ControlLogix ControlNet redundant media ControlNet bridge1756-CN2 RXTC ontrolLogix-XT redundant media ControlNet bridge1756-CN2(1) ControlLogix ControlNet (1) ControlLogix redundant media ControlNet bridge1756-CN2 RXT(1) ControlLogix -XT redundant media ControlNet bridge1756-CN2RK(1) ControlLogix redundant ControlNet bridge (conformal coated) module1756-EN2 TControlLogix EtherNet/IP communication (2)(3)C (or earlier) or (4)(5)

8 1756 -EN2 TRControlLogix EtherNet/IP communication (3)(6)B (or earlier) or (5)(7) 1756 -EN2 FControlLogix EtherNet/IP fiber communication module (8)B (or earlier) or (4)(5)Rockwell Automation Publication 1756 -RN694P-EN-P - February 20184 ControlLogix Enhanced Redundancy System, Revision EtherNet/IP communication (2)(3)C (or earlier) or (4)(5) 1756 -EN2 TRXTC ontrolLogix-XT EtherNet/IP redundant communication (3)(6) (5)(7) 1756 -EN2 TRKC ontrolLogix EtherNet/IP conformal coated communication bridge (3)(6) 1756 -EN2 TKControlLogix EtherNet/IP conformal coated communication bridge (2)(3)

9 1756 -L61 ControlLogix 5561 5562 controller1756-L63 ControlLogix 5563 controller1756-L63 XTControlLogix-XT controller1756-L64 ControlLogix 5564 controller1756-L65 ControlLogix 5565 controller1756-L71 ControlLogix 5571 controller1756-L72 ControlLogix 5572 controller1756-L73 ControlLogix 5573 controller1756-L73 XTControlLogix-XT controller1756-L74 ControlLogix 5574 controller1756-L75 ControlLogix 5575 controller1756-RM2 ControlLogix Redundancy Redundancy module1756-RM2 XTControlLogix-XT Redundancy module1756-RMControlLogix Redundancy Redundancy module(1)IMPORTANT: The 1756 -CN2/C, 1756 -CN2R/C, 1756 -CN2 RXT/C, 1756 -CN2RK/C modules do not support firmware revisions previous to Revision Do not attempt to update the firmware to earlier revisions.

10 (2)IMPORTANT: The 1756 -EN2T/D modules do not support firmware revisions previous to Revision Do not attempt to update the firmware to earlier revisions.(3)Firmware Revision or later is digitally signed. For more information on digitally signed firmware, see page 5.(4)IMPORTANT: The 1756 -EN2T/C (or earlier) modules do not support firmware Revision or later. Do not attempt to update the firmware to Revision or later.(5)Firmware Revision is digitally signed firmware. Firmware Revision is unsigned firmware.


Related search queries