COVERING A MASONRY WALL WITH GYPROCK …

Installing Gyprock plasterboard

sized daubs of Gyprock Stud Adhesive at maximum 300mm spacings to each of the studs, keeping the area 200mm either side of the sheet edge free of adhesive. 2. Where the end of a sheet is at a stud, do not apply adhesive as these will be fixed with nails or screws alone. 3. Place plasterboard offcuts on the floor against the frame

  Gyprock

Boundary Wall System - gyprock

fixing plasterboard/wallboard linings to timber framing, and for laminating plasterboard. Fine thread screws and clouts may also be used for fixing to timber. Application Size (Framing) Pack Qty Order No. 1x10mm/ Laminating 16mm 6g x 25mm (softwood/ hardwood) Loose 1000 169067 Collated 1000 162775 1x13/16mm 6g x 32mm (softwood/ hardwood) Loose ...

  Fixings, Plasterboard, Plasterboard fixing

GYPROCK STRATAWALL INTER-TENANCY WALL …

Gyprock Standard Plasterboard – Recessed Edge Features † Recessed long edges to assist in producing smooth even and continuous surface once jointed.

Installing Gyprock Cornice

1. If you’re using a dry Gyprock Cornice Cement, mix with water as per the instructions on the pack to give a smooth creamy consistency. The cornice cement working life is around 60 minutes, so only mix what you can use in that time. 2. Working on one piece at a time and starting with the shorter lengths, apply a 10mm thick bead of Gyprock ...

  Gyprock

GYPROCK SHAFT SYSTEMS

Architectural Specification 9 System Selection Shaftwall System Table ... concrete enclosures. Weight reductions of this magnitude can result in significant ... plasterboard sheet products for fire rated and non-fire rated applications. Refer to Table 1 for thickness and sheet

  Specification, Trade, Fire, Concrete, Architectural, Fire rated, Architectural specification

GYPROCK PARTY WALL INTERTENANCY WALL …

GYPROCK PARTY WALL SYSTEMS 6 Wall Clip † Aluminium Wall Clip: Used to support the 25mm H-Stud, and are critical in the fire performance of systems with a single 25mm Shaft Liner.

  System, Walls, Party, Dust, Gyprock, Wall systems, Gyprock party wall intertenancy wall, Intertenancy

120215 Technical Specification Sheet - SIPs Ready Cut

© 2012 Sips Industries Australia Pty Ltd. All Rights Reserved. 3 1 FIRE RATINGS 1.1 GUIDELINES FOR FIRE RATINGS AUSTRALIA Internal walls:

  Specification