cp l pv Portable Poultry Pen cp m n pv co l n pvcp

1 List: All Pipe is 1" Sch 40 PVC (unless otherwise specified) Item Qty DescriptionA2859" PipeB1324" or 36" PipeC610" PipeD156-1/2" PipeE54" Pipe (1-1/4" Sch 40 PVC)F201" Snap Clamps 4"G51" Slip-T'sH121" 3-way Connector I61" 90 deg. ElbowJ71" 4-way ConnectorK31" 5-way ConnectorL19'x16-1/2" Tarp or Shade ClothM16'x50' Roll Chicken WireP 100-130 3-1/2" Plastic Zip TiesS25 Self Tapping Screws (3/4" Long)T 1 or 2 Bungee CordsUPVC GluePortable Poultry PenPage 1 of 4 HINGE & LATCH ASSEMBLY: Glue 2 Pieces of 1-1/4" PVC x 4" (E) Together to Create Hinges as Shown in Fig. 1. Make 2 1 Piece 1-1/4" x 4" (E) to 1 SnapClamp (F) to Create Latches as Shown in Fig. 2. Make 1 2 LatchHingeFig. Poultry PenPage 2 of 4 ASSEMBLY INSTRUCTIONS: (Do Not Glue any Parts Unless Otherwise Noted)1. Assemble Base as Shown. Slide Slip-T's (G) onto Inner Frame Pipes for Insert Upright Supports (B)3.

2 Insert Feeder Upright Supports (C) into Slip-T's on Assemble Feeder with Left Over 24" or 36" Pipes (B) and 3-ways (H). Adjusting Slip-T's to Assemble Upper Frame as Shown. Slide Slip-T (G), Hinges and Latch onto Upper Frame Pipes and Locate as Attach 56-1/2" Cover Ridge (D) to Upper Frame with 10" Pipes (C) and Elbows Poultry PenPage 3 of COVERINGS & DOOR:1. Cover Entire Pen with Chicken Wire (M) Using Plastic Zip Ties (P) Spaced 6"-8" To Hold it Together and Secured to the Slide Bottom Door Pipe (A) Through Hinges and Then Assemble Door with Elbows (I)3. Carefully Cut the Chicken Wire out of the Door Opening and Attach it to the Door with Plastic Zip Ties (P) Spaced Poultry PenPage 4 of TOUCHES:1. Attach the Tarp or Shade Cloth (L) Over Ridge Support with SnapClamps (F) Spaced 6"-8" to Provide Secure SnapClamps, Hinges and Latch with Self Tapping Screws (S) as Trim Excess Covering4.

3 Use Bungee Cords (T) to Hold Door Plans are Free and Therfore we do not Warrent or Garauntee the Structure Built from