Cutting Edge Floor Stripper - Interline Brands

1 Cutting Edge Floor StripperSAFETY DATA SHEETV ersion Number: 2 Preparation date: 2015-03-111. IDENTIFICATIONP roduct name: Cutting Edge Floor StripperProduct Code:REN02868 (297223), REN02869 (297224) SDS #:MS0800142 Recommended use: Industrial/Institutional Floor Stripper This product is intended to be diluted prior to useUses advised against:Uses other than those identified are not recommendedEmergency telephone number:1-800-851-7145 ( ); 1-651-917-6133 (Int'l)2. HAZARDS IDENTIFICATIONC lassification for the undiluted product Skin corrosion/irritationCategory 1 BSerious eye damage/eye irritationCategory 1 Signal Word: Statements CAUSES SEVERE SKIN BURNS AND SERIOUS EYE contact with eyes, skin and clothing. Causes burns/ serious damage to mouth, throat and stomach.

2 Keep container tightly closed. Do notbreathe vapors. Wash affected areas thoroughly after handling. Use only in a well-ventilated area. Wear chemical-splash goggles,chemical-resistant gloves and protective footwear. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting unless directed to do so by medicalpersonnel. Drink a cupful of milk or water. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water for at least 15minutes. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Immediately call a Poison Center (1-800-851-7145) orphysician. Wash contaminated clothing before reuse.

3 Dispose of in accordance with all federal, state and local applicable hazards not otherwise classified (HHNOC) - Not applicablePhysical hazards not otherwise classified (PHNOC) - Not applicableCutting Edge Floor StripperManufacturer, importer, supplier:US HeadquartersDiversey, 16th , Wisconsin 53177-1964 Phone: 1-888-352-2249 MSDS Internet Address: of 5 Canadian HeadquartersDiversey, Inc. - Canada3755 Laird RoadMississauga, Ontario L5L 0B3 Phone: 1-800-668-31313. COMPOSITION/INFORMATION ON INGREDIENTSC lassified Ingredients Ingredient(s)CAS #Weight %Monoethanolamine141-43-510 - 20%Benzyl alcohol100-51-65 - 10%Sodium xylene sulfonate1300-72-71% - < 3%Diethylene glycol butyl ether112-34-51% - < 3%*Exact percentages are being withheld as trade secret information4.

4 FIRST AID MEASURESU ndiluted Product: Eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least15 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water for at least 15 : IF INHALED: Remove person to fresh air and keep comfortable for : IF SWALLOWED: Rinse mouth. DO NOT induce vomiting unless directed to do so by medical personnel. Drink a cupful of milk Important Symptoms/Effects: No information medical attention and special treatment needed Not Medical Conditions: Individuals with chronic respiratory disorders such as asthma, chronic bronchitis, emphysema, etc., may bemore susceptible to irritating FIRE-FIGHTING MEASURESS pecific methods:No special methods requiredSuitable extinguishing media:The product is not flammable.

5 Extinguish fire using agent suitable for surrounding hazards:Not protective equipment for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH(approved or equivalent) and full protective for the diluted product @ 1:4 Skin corrosion/irritationCategory 2 Serious eye damage/eye irritationCategory 2 ADilution Signal word: Statements CAUSES SKIN AND SERIOUS EYE contact with eyes, skin and clothing. Wash affected areas thoroughly after handling. May cause irritation to mouth, throat and stomach. Wearchemical-splash goggles and chemical-resistant gloves. IF SWALLOWED: Rinse mouth. Drink a cupful of milk or water. IF ON SKIN: Wash withplenty of soap and water. If skin irritation occurs: Get medical advice or attention.

6 IF IN EYES: Rinse cautiously with water for several contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. If eye irritation persists: Get medical advice or of in accordance with all federal, state and local applicable Product:Eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least15 minutes. If eye irritation persists: Get medical advice/attentionCutting Edge Floor Stripper2 of 5 Skin: IF ON SKIN: Wash with plenty of soap and water If skin irritation occurs: Get medical advice/attentionInhalation: No specific first aid measures are requiredIngestion: IF SWALLOWED: Rinse mouth. Drink a cupful of milk or media which must not be used for safety reasons: No information ACCIDENTAL RELEASE MEASURESP ersonal precautions:Put on appropriate personal protective equipment (see Section 8.)

7 Contaminated surfaces will beextremely precautionsand clean-up methods:Clean-up methods - large spillage. Absorb spill with inert material ( dry sand or earth), then place ina chemical waste container. Use a water rinse for final HANDLING AND STORAGEH andling: Avoid contact with skin, eyes and clothing. Do not taste or swallow. Avoid breathing vapors or mists. Use only with adequate and wash contaminated clothing and footwear before re-use. Wash thoroughly after handling. Product residue may remain on/in emptycontainers. All precautions for handling the product must be used in handling the empty container and residue. FOR COMMERCIAL ANDINDUSTRIAL USE :Protect from freezing. Keep tightly closed in a dry, cool and well-ventilated place.

8 KEEP OUT OF REACH OF Level (if applicable) : Not applicable8. EXPOSURE CONTROLS / PERSONAL PROTECTIONE xposure Guidelines:.Ingredient(s)CAS #ACGIHOSHAM onoethanolamine141-43-56 ppm (STEL)3 ppm (TWA)3 ppm (TWA)6 mg/m3 (TWA)Benzyl alcohol100-51-6--Sodium xylene sulfonate1300-72-7--Diethylene glycol butyl ether112-34-510 ppm (TWA)-Undiluted Product: Engineering measures to reduce exposure:Good general ventilation should be sufficient to control airborne levels Respiratory protection is not required if good ventilation is Protective Equipment Eye protection:Chemical-splash protection:Chemical-resistant and body protection:Protective footwear. If major exposure is possible, wear suitable protective clothing and protection:In case of insufficient ventilation wear suitable respiratory equipment.

9 A respiratory protection programthat meets OSHA's 29 CFR and ANSI requirements must be followed wheneverworkplace conditions warrant a respirator's measures:Handle in accordance with good industrial hygiene and safety PHYSICAL AND CHEMICAL PROPERTIES:Diluted Product: Personal Protective Equipment Eye protection:Chemical-splash protection:Chemical-resistant and body protection:No personal protective equipment required under normal use protection:No personal protective equipment required under normal use measures:Handle in accordance with good industrial hygiene and safety State: LiquidColor: Clear, StrawEvaporation Rate: No information availableOdor: Solvent SolventOdor threshold: No information point/range: Not determined Melting point/range: Not determined Decomposition temperature: Not determinedAutoignition temperature: No information availableSolubility: Completely SolubleSolubility in other solvents: No information availableRelative Density (relative to water): : lbs/gal Kg/LVapor density: No information availableBulk density: No information availableVapor pressure: No information point: > 200 F > CPartition coefficient (n-octanol/water): No information availableCutting Edge Floor Stripper3 of 5 Dilution Flash Point: > 200 F > CViscosity: No information availableElemental Phosphorus: % by : % *Explosion limits: - upper.

10 Not determined - lower: Not determined* - Title 17, California Code of Regulations, Division 3, Chapter 1, Subchapter , Article 2, Consumer Products, Sections 9450810. STABILITY AND REACTIVITYR eactivity:Not ApplicableStability:The product is stableHazardous decomposition products:None reasonably to avoid:Do not mix with any other product or chemical unless specified in the use to avoid:No information TOXICOLOGICAL INFORMATIONI nformation on likely routes of exposure: Eye contact, Skin contact, Inhalation, IngestionDelayed, immediate, or chronic effects and symptoms from short and long-term exposure Skin contact: Corrosive. Causes severe burns. Symptoms may include burns, blisters, redness and pain (which may be delayed).