D Subminiature Connectors - ITT Interconnect Solutions

1 D SubminiatureConnectorsDimensions are shown in mm (inch) Dimensions subject to change1D SubminiatureContentsContentsPageGeneral Application D Subminiature Connectors Straight PCB Selection *NG Pressfit *M Solder Termination (Machined) Standard PC * Solder Termination (Stamped)..8D* Solder Termination (Machined) European PC * Wrap Post 90 PCB Selection *M Solder Termination (Machined) Standard Footprint .318 or .283 inch .. 16 ZED* Solder Termination (Stamped) Standard Footprint .318 * Solder Termination (Machined) European Footprint 10,2 or 9,4 * Solder Termination (Stamped) European Footprint 10,2 Cable Selection Solder Cup Solder Termination (Machined) with Tin * Solder Cup Solder Termination (Stamped) with Tin *A Crimp Connectors without *W Discrete Wire Application D Subminiature Connectors Combo D Selection D PCB Connectors with 75 Ohm Coaxial Contacts (50 Ohm Option).

2 44 Combo D PCB Connectors with High D PCB Connectors with (Size 20) Signal Contacts D Cable Solder D Cable Crimp Connectors and Shield Contacts and Commercial Micro D Selection Connectors and Filter D Selection *JK PCB *JT Solder Cup and Combo High Power Reliability D Subminiature Connectors Military/High Reliability Selection 90 , Straight, Wrap Post, and Cable Solder Cross References and Test Data ..142 Military/High Reliability Combo D ..146 SNASA/GSFC & ESA-SCC Cross Selection s Resource Selection Reference of Products/Available Products Not Previously Number Safety and D is a registered trademark of ITT Cannon in the United States.

3 Connector footprint measured from the front shell. Connector footprint measured from the rear ITT Cannon D Subminiature family ofconnectors has grown toinclude a wide variety of styles,options and accessories and isoften the most economicalsolution to any interconnectproblem. Ideally suited forboth commercial/industrialapplications and military/aerospace applications, ITT Cannon D Subminiatureconnectors have foundworldwide acceptance in amultitude of applicationsranging from office equipmentto the Cover Filter D, Combo D ,Commercial Micro D(MDSM), Pressfit D,and Standard DOur facility is not currently certified by the DLA and this product is not covered by the are shown in mm (inch)

4 Dimensions subject to change2D* - Wrap Post TerminationSee pages Features High performance commercial classconnectors Two contact lengths for 2 or 3 wraps Machined contactsD* straight Connectors are available for highperformance uses according to DIN available in two popular * - Straight Solder Termination (Stamped)See pages Features Stamped contacts with 5 A current capacity Economical Optional vertical standoffs with optionalharpoon style boardlocks or screw locksZD* straight Connectors are available forapplications where price is the primary driver.

5 Theyare available with or without boardlocks and SubminiatureStraight PCB Selection GuideD*NG - Straight Pressfit TerminationThe D*NG is based upon the specificationCECC75-301-802. These Connectors provide alow-cost alternative to traditional through holesolder contacts. Utilizing stamped Eye of theNeedle compliant contact tails per IEC-352-5, theparts are quickly and easily mounted onto PCBswithout soldering, crimping or specialized socket contact engaging area utilizes a spoon shape with four points ofinterconnection.

6 Hardware options provideflexibility and ensure that the final product fits theelectrical requirements of any Features Quick and easy press-in installation withoutspecialized tooling Spoon socket contact provides improvedinterface compared to Tuning Fork Closed-entry socket for secure blind mating Front-shell only design based onCECC 75-301-802 Eye of the Needle compliant contact tails Press-in bolt for ground continuity #4-40 UNC and M3 hardware optionsSee pages *M Straight Solder Termination (Machined) Standard PC TailsSee pages Features A current capacity Machined contacts 2 contact finishes Optional vertical standoffs, screw locks, andboardlocks (4 prongs) UL file number E8572 Dimensionally compatible with Combo D D*M straight PCB Connectors , which are designed to be equivalent to MIL-C-24308 (except for finishes) for printed circuit boards and backplanes in demanding applications.

7 Additional contact lengths, hardware and finish options available; consult factory for * - Straight Solder Termination (Machined) European PC TailsSee pages Features High performance commercial Connectors Two contact finish performance classes Optional vertical standoffs, threaded insertsand pushfits/boardlocks OL2 contact length, other lengths available Tin plated contact PC tails (pin & socket) Machined contactsD* straight Connectors are available for highperformance uses according to DIN with European length OL contact finish from 2 performance are shown in mm (inch)Dimensions subject to change3 Materials and FinishesDescriptionMaterialFinishShellSt eelTinInsulatorThermoplastic, UL 94V-0 None (color: dark green)ContactSocket: copper AlloyGold over Nickel.

8 Terminatingend Tin (Socket)HardwareSteel/ copper AlloyTin/ZincSpecificationsTemperature Rating 55 C to 125 CCurrent Rating 5 AContact Resistance 10 m Dielectric WithstandingVoltage 1250 VAC at Sea LevelMaterials and FinishesDescriptionMaterialFinishShellSt eelTinInsulatorThermoplastic, UL 94-0 None (color: black)ContactsCopper AlloyGold over NickelHardwareSteel/ copper AlloyTin/ZincSpecificationsTemperature Rating 55 C to 105 CCurrent Rating 5 AContact Resistance 15 m Dielectric WithstandingVoltage 1000 VAC at Sea LevelD SubminiatureStraight PCB Selection GuideSpecificationsCurrent Rating 5 A / 25 C, A / 70 C ambientTemperature Rating 55 C to 125 CContact Resistance 10 m Test Voltage 1200 Vrms at Sea LevelXPlated Through Hole 1,09 - 0,94 (.)

9 043 - .037)PC Tail Press-in Force 100N/contact Tail Push-out Force 30N/contact Board Thickness 3,20 - 1,60 (.125 - .062)Materials and FinishesDescriptionMaterialFinishShellSt eelTinInsulatorThermoplastic, UL 94V-0 None (color: black)ContactCopper AlloyGold over Nickel (Standard) or Gold over PdNi (-408)HardwareSteel/ copper AlloyTin/ZincMaterials and FinishesDescriptionMaterialFinishShellSt eelTinInsulatorThermoplastic, UL 94V-0 None (color: dark green)ContactCopper AlloyGold over Nickel.

10 Terminatingend Tin (Socket only)HardwareSteel/ copper AlloyTin/ZincSpecificationsTemperature Rating 55 C to 125 CCurrent Rating AContact Resistance 55 millivolt max at A test currentDielectric WithstandingVoltage 1000 VAC at Sea LevelMaterials and FinishesDescriptionMaterialFinishShellSt eelTinInsulatorThermoplastic, UL 94V-0 None (color: dark green)ContactsCopper AlloyGold over Nickel in mating area,Tin on balanceHardwareSteel/ copper AlloyTin/ZincSpecificationsTemperature Rating 55 C to 125 CCurrent Rating 5 AContact Resistance 10 m Dielectric WithstandingVoltage 1250 VAC at Sea LevelDimensions are shown in mm (inch)Dimensions subject to change4D SubminiatureD*NGStraight Pressfit TerminationMounting TypesDimensionsShell SizeA 0,38 (.)