Transcription of D207 - gc.co.th
1 d207 Experimental grade Low Density Polyethylene Resin Special Characteristics : d207 resin is produced by high pressure tubular process, a technology licensed by lyondellbasell . This grade is developed by increasing flow ability for excellent processability and optical properties with good . mechanical properties. C. Typical Applications : d207 is mainly recommended for film application, and can be used in injection application also. PL. Additives : Slip and Antiblock added. Typical Properties : S. N. Properties d207 Unit Test Method O. Physical Properties Melt Index (190 oC, kg). Density TI g/10 min g/cm3. ISO 1133. ISO 1183. EC. Melting Temperature 109 o C ISO 11357. Vicat Softening Point 87 o C ASTM D1525.
2 N. Film Properties* (Based on blown film). Max. Tensile Strength (MD/TD) 22/18 MPa ISO 527. N. Ultimate Elongation (MD/TD) 490/620 % ISO 527. O. Dart Drop Impact 90 g ASTM D1709. Haze 7 % ASTM D1003. C. Gloss (20 ) 80 - ASTM D2457. * film properties obtained from 50 microns film which was blown film extruded at blow up ratio L. BA. LO. G. Processing Condition : The recommended temperature setting is in the range of 150 - 190 oC for extruder and 170 - 190 oC for die zone. Note : Properties reported here are typical values of the product, not to be considered as specifications. PTT Global Chemical makes no representations as to the accuracy or completeness of the information contained herein.
3 PTT Polymer Marketing Company Limited Energy Complex Building A, 9th Floor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 4488 Fax: 66 2140 4333 Revised Date : May, 2013.
