D85PX-15E0: 27650 kg D85EX D85PX

D85ESS-2A

control lever provide comfortable operation and increased leg space. Easy-to-operate work equipment control lever With the Closed-center Load Sensing (CLSS) hydraulic system, blade lever stroke is directly proportional with blade speed, regardless of the load and travel speed.This results in superb, fine controllability. Benefits of CLSS

  Control, Lever, Control lever

HD 465 HD465 - komatsu.jp

HD 465 HORSEPOWER Gross: 551 kW 739 HP/2000 min-1 Net: 533 kW 715 HP/2000 min-1 MAXIMUM PAYLOAD 55 metric tons BODY CAPACITY (Heaped 2:1, SAE) 34.2 m3 HD465-7R Photos may include optional equipment.

  Gross, Horsepower, Hd465, Hd 465 hd465, Hd 465 horsepower gross, 551 kw

HM 400 HM400 - komatsu.jp

HM 400 HORSEPOWER Gross: 338 kW 453 HP/2000min-1 Net: 334 kW 448 HP/2000min-1 MAXIMUM PAYLOAD 40 metric tons BODY CAPACITY (Heaped 2:1, SAE) 24.0 m3 HM400-3M0 Photos may include optional equipment.

PC2000-8 BACKHOE

Enlarged track rollers, in combination with the largest size track links, provide excellent durability. Sturdy Guard and Large Track Link Heat resistant H-NBR seal and pack-ing are employed for the hydraulic equipment and power train com-ponents. The heat resistant rubber employed for the hydraulic hose has extended its life 1.5 - 2 times.

  Rubber, Roller, Backhoe, Pc2000, Pc2000 8 backhoe

CEN00223-03 PC400-8, PC400LC-8 CRAWLER EXCAVATORS

PC 400 Photos may include optional equipment. HORSEPOWER Gross: 270 kW 362 HP / 1900 min-1 Net: 257 kW 345 HP / 1900 min-1 OPERATING WEIGHT PC400-8: 41740 – 42590 kg

  Crawler, Cp400, Pc400lc, Cen00223 03 pc400 8, Cen00223, Pc400lc 8 crawler

熱電発電による工場排熱回収 - komatsu.jp

to be 20 to 30 kW and this waste heat is converted into electricity by the thermoelectric generating system. The thermoelectric generator consists of sixteen thermoelectric generating modules made of a Bi-Te thermoelectric material. Each thermoelectric generating module is 50mm wide and deep and 4.2mm high.

  Generators, Thermoelectric, Thermoelectric generator

D D61PX D61EX - komatsu.jp

c rawler d ozer. walk-around d61-15e0 d61ex/px-15e0 c rawler d ozer crawler dozer 2 3 horsepower gross: 127 kw170 hp @ 1850 rpm net: 125 kw168 hp @ 1850 rpm operating weight d61ex-15e0: 16710 kg36,840 lb d61px-15e0: 18710 kg41,250 lb blade capacity pat dozer: d61ex-15e0: 3.4 m3 4.4 yd3

  Zero, Crawler, Rawler, Dozer, C rawler d ozer crawler dozer, C rawler d ozer

PC 200 PC200 - komatsu.jp

400-liter high-capacity fuel tank. Effec-tive corrosion resistance using rust-The PC200-8M0’s cab floormat is easy proof treatment. to keep clean. The gently inclined sur-face has a flanged floormat and drainage holes to facilitate runoff. Removes water and contaminants in the fuel to pre-vent fuel problems. (With built-in prim-ing pump)

  Tanks

D155AX - komatsu.jp

2 3 WALK-AROUND D155AX-6 HORSEPOWER Gross: 268 kW360 HP @ 1900 rpm Net: 264 kW354 HP @ 1900 rpm OPERATING WEIGHT 39500 kg 87,100 lb BLADE CAPACITY SIGMADOZER: 9.4 m3 12.3 yd3 D155AX-6 C RAWLER D OZER CRAWLER DOZER PCCS (Palm Command Control System) Electronic controlled PCCS travel control

  D155ax

PC228US PC228USLC - 小松製作所

BUCKET CAPACITY 0.50 – 1.00 m3 0.65 – 1.31 yd3 Komatsu’s PC228US-8 Series Hydraulic Excavators have a short tail swing profile, designed specifically for work in confined areas. By reducing tail swing, the PC228US-8 can work in areas where conventional profile excavators would pose a safety risk. Ecology and Economy Features Low Emission ...

  Bucket

Ventilation for buildings — Calculation methods for the ...

conditioning systems.* ... This European standard describe the method to calculate the ventilation air flow rates for buildings to be used for applications such as energy calculations, heat and cooling load calculation, summer comfort and indoor air quality evaluation. The ventilation and air tightness requirements (as IAQ, heating and cooling ...

  Load, Conditioning, Cooling, Calculate, To calculate, Cooling load

HVAC Air Handling Unit Design Considerations

2. Calculate the system cooling load. This step adapts the selected air distribution system to the zone load and involves the introduction of the required outdoor air volume into the air conditioning system for ventilation.

  Load, Handling, Conditioning, Cooling, Calculate, Air conditioning, Air handling, Cooling load

Basic Electrical Engineering for HVAC Engineers

A heating, ventilating and air-conditioning (HVAC) system is a simple system of heating and cooling exchangers using water or refrigerant (direct expansion system) as the medium. Pumps move the heated or cooled water to the exchangers. Fans then move the warmed or cooled air created at the exchangers to the occupied building interiors.

  Conditioning, Cooling