1 DAF-150D . FRONT-MOUNTED MULCHERS. Achieve High Productivity and Low Costs in land clearing and vegetation control. ideal for intensive brushcutting applications mounted on wheeled or tracked skid steers or other dedicated units that are designed for use with front-mounted attachements. Industrial Land Clearing Forest Fire Prevention Road Development Pipelines Development Transmission lines and Maintenance and Maintenance Development and Maintenance DAF-150D . FRONT-MOUNTED MULCHERS. SPECIFICATIONS DAF-150D HYDRAULIC SYSTEM DAF-150D . Approximate Min. Variable Displacement Carrier Power [kW (hp)] 60 (75) Axial Piston Motor [cc] 1x 85. 150 (59) Required Continuous Cutting Width [cm (in)] 87 (23). Flow [L/min (gal/min)]. Cutting Distance from Max. Operating Motor Ground Level [cm (in)]. 1 ( ). Pressure [bar (psi)].
2 240 (3500). Variable displacement, axial-piston motors Number of Rotating Speed [rpm]. 21 2500. that minimize overheating Blades on Rotor and improve re-acceleration. Optimal Target Material 15 (6) Pressure Line [# (in)] #12 ( ). Diameter [cm (in)]. Drive Industrial cogged belt drive system that Exterior Width [cm (in)]. 182 (72) Return Line [# (in)] #12 ( ). prevents slippage and reduces effort applied to bearings compared with V-belts, for lon- Exterior Height (with 150 (59) Drain Line [# (in)] #8 ( ). ger bearing life. Pushbar) [cm (in)]. Exterior Width (with Rings Pushbar) [cm (in)] 122 (48) OPTIONS DAF-150D . Protective rings that limit the size of the Type of Sharpenable Exterior Height (without bites and considerably reduce risks of break- 66 (26) Bolt-on Forged Blades Standard Pushbar) [cm (in)].
3 Age on the knife holders. Exterior Width (without Hydraulic Pushbar 72 (29). Pushbar) [cm (in)]. Rotor Diameter [cm (in)] Bolt-on wear liner 46 (18). Approximate Typical Weight [kg (lbs)] 1050 (2300). Replaceable Liner With the high speeds and forces involved in industrial mulching, even the hardest steel frame is subject to wear and tear. This easy-to-replace, bolt-in wear liner extends the lifetime of the Knives unit by protecting the frame. Heat-treated, bolt-on forged knives that deliver maximum resistance to impact and abrasion, and Hydraulic pushbar option that can be sharpened right on the unit. Especially useful when working in older growth as a secure way to direct where big trees will fall Easy remplacement when cutting them down Easy-to-replace knives: A single nut and bolt holds the knife in place.
4 Replacing worn knives is a very easy. CONTACT US Printed in Canada : 2018-02. 211 rue Notre-Dame Toll free : 877-279-2300. Roxton Falls QC J0H !E0 Phone : 450-548-7007. Canada Fax: 450-548-7008.