Data Sheet DAHLPAC MC79 - ATL Composites

1 INTERNATIONAL mc79 data SheetVacuum breather pad with zero resin bleed for resin infusions5700 Skylab RoadHuntington BeachCA 92647 USAP hone : +1 714-899-8100 Fax : +1 714-899-8179E-mail : : updated : 2012-08-27 Catalog position : Resin infusion productsAs the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is".Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained hereinrepresents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, mc79 is an easy to use strip material that allows vacuum to be applied over the surface of a compositelaminate with no resin bleed out and little part mark-off.

2 DAHLPAC mc79 is constructed with Dahltexx SP-2 fabricwhich breathes efficiently and can control resin :> Ensure complete resin wet out and avoid dry patches by achieving efficient total air removal with vacuumdistribution over the part surface.> Speed up infusions with multiple resin feeds and avoid dryness where flow fronts meet.> Infuse up stringer profiles and avoid dry patches with stringer top vacuum manifolds.> Simplify vacuum bagging, saving time and reduce resin DATAM aterial typeDahltexx SP-2 fabric and breather meshColorBlueMaximum use temperature255 F (125 C)Materials to avoidCompatible with most inches ( cm)80 feet ( m)NOTESW ider widths available on request. Minimum order required.