Example: air traffic controller

DESCRIPTION SPECIFICATION FEATURES - Cooper Industries

The lumawatt Pro Gateway is the intermediary device between the lumawatt Pro energy manager and the lumawatt Pro control network. The Gateway relays energy , environmental and occupancy data captured by lumawatt Pro Smart Sensors to the energy manager for analysis and reporting. It also communicates configuration changes from the energy manager out to sensors and other network devices. DESCRIPTIONPS503007EN3-15-2018 SPECIFICATION FEATURESO verviewThe lumawatt Pro Gateway (LWP-GW-2-01) aggregates wireless traffic between the network of lumawatt Pro Smart Sensors and the energy manager appliance. Each Gateway sends and receives data for up to 100 individual devices. It uses the IEEE protocol for wireless communication with the sensors and a wired TCP/IP network forcommunication with the lumawatt Pro energy SecurityAES 100-bit encryption for wireless data transmission and SSL encryption for TCP/IP data transmission enabled for data Gateway can individually support up to 100 individual devices.

The LumaWatt Pro Gateway is the intermediary device between the LumaWatt Pro Energy Manager and the LumaWatt Pro control network. The Gateway relays energy

Tags:

  Industreis, Manager, Energy, Cooper industries, Cooper, Lumawatt, Lumawatt pro, Lumawatt pro energy manager

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of DESCRIPTION SPECIFICATION FEATURES - Cooper Industries

1 The lumawatt Pro Gateway is the intermediary device between the lumawatt Pro energy manager and the lumawatt Pro control network. The Gateway relays energy , environmental and occupancy data captured by lumawatt Pro Smart Sensors to the energy manager for analysis and reporting. It also communicates configuration changes from the energy manager out to sensors and other network devices. DESCRIPTIONPS503007EN3-15-2018 SPECIFICATION FEATURESO verviewThe lumawatt Pro Gateway (LWP-GW-2-01) aggregates wireless traffic between the network of lumawatt Pro Smart Sensors and the energy manager appliance. Each Gateway sends and receives data for up to 100 individual devices. It uses the IEEE protocol for wireless communication with the sensors and a wired TCP/IP network forcommunication with the lumawatt Pro energy SecurityAES 100-bit encryption for wireless data transmission and SSL encryption for TCP/IP data transmission enabled for data Gateway can individually support up to 100 individual devices.

2 System architecture enables effective scalability to very large Communication ProtocolsUse of industry standard communication protocols provides robust and mature RangeEach Gateway can operate at 150 ft. radius (46m) open range in open ceiling installation and individual sensor units can function as repeaters to extendoperating Lighting Wireless SystemPowered byLumaWatt ProOne or more Gateways may be deployed on each floor to relay information between the sensors and the lumawatt Pro energy manager appliance. The device mounts to the ceiling at the same height as an individual sensor device. The antenna is then pointed down. CAT5e cable is run from the lumawatt Pro Gateway to the lumawatt Pro PoE switch (RJ-45 connector not shown).WIRING & OPERATIONSLUMAWATT PROGATEWAYLWP-GW-2-01 COMPLIANCEE urope: CE, RoHS, : FCC, UL ListedCanada: cUL ListedWarranty: 5 yearsRadio Frequency: 2400 MHzRF TX Output Power: 0 dBm (average)Wireless Protocol: IEEE compliantWireless Range: 150 ft.

3 Radius (46m) open rangeOperating: 32 to 122 F / 0 to 50 CConnector Type: RJ-45 Enclosure: Recyclable ABSI nput Voltage: PoE / 48 VEncryption: AES-128 Bluetooth Low energy (BLE):Operating Frequency: 2400 MHzIEEE Standard: Interval: ConfigurableCatalog NumberProduct DescriptionLWP-GW-2-01 lumawatt Pro GatewayORDERING INFORMATIONTECHNICAL SPECIFICATIONSS pecifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P.


Related search queries