Example: bankruptcy
Design, Installation and Maintenance Manual
c) For hazardous locations, heat tracers must be certified for use in the particular explosive gas atmosphere. For any application, there is a maximum allowable power density at which a heat tracer can be used without damaging either the work piece or its contents. This is particularly critical in certain
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
self-regulating heating cable. Inherently Temperature-Safe ...
www.heat-trace.comThe Heat Tracing Authority TM 225ºC F ail S afe + Inherently Temperature-Safe Heating Cable FS+ A high temperature self-regulating heating cable. SRDS0108 (Feb 18)
self-regulating heating cable. Inherently Temperature-Safe ...
www.heat-trace.comThe Heat Tracing Authority TM 225ºC F ail S afe S uper Inherently Temperature-Safe Heating Cable FSS Very high temperature self-regulating heating cable.
SF-P/SF-T/SF-E STRIPFREE - Heat Trace | Home
www.heat-trace.comSTRIPFREE Universal Connection System For Safe and Hazardous Areas SF-P/SF-T/SF-E Universal system for termination of Heat Trace’s self-regulating heating tapes
Design, Installation and Maintenance Manual
www.heat-trace.comThe Heat Tracing AuthorityTM Design, Installation and Maintenance Manual Industrial Electric Heat Tracing Systems
Related documents
Cables and cable glands for hazardous locations
www.eaton.comCable glands (cable entry devices) used in hazardous locations are intended to provide the safe connection of suitable cables to enclosures, maintaining the explosion protection and ingress properties of equipment. In North America, the NEC and the CEC prescribe the requirements for both cable glands and cables. Both
INTERACTIVE CATALOGUE - CABLE CLEATS, CABLE JOINTS, …
www.cablejoints.co.uke Cable Glands Contents Hawke Cable Glands Contents Flameproof/Increased Safety and Industrial Cable Gland Selection Chart 4 - 8 HazardousArea Cable Glands 9 - 23 ... 11.0 NorthAmerican Hazardous (Classified) Locations 69 - 74 12.0Wiring Systems 74 - 80 13.0Abbreviations,Acronyms and Definitions 80 - 83 . PSG 553/RAC 501/453/Universal …
Rosemount 848T High Density Temperature Measurement …
www.emerson.comJP2 Plastic box, cable glands (9 × M20 nickel-plated brass glands for 7.5–11.9 mm unarmored cable) ★ JP3 Plastic box, conduit entries (five plugged holes, suitable for installing ½-in. NPT fittings) ★ JA1 Aluminum junction box; no entries ★ JA2 Aluminum cable glands (9 × M20 nickel-plated brass glands for 7.5–11.9 mm unarmored ...
General Specifi cations AXG Electromagnetic Flowmeter
web-material3.yokogawa.comnot selected, cable length is each 30 m) are pre-wired and waterproof glands with union joints are attached at factory. Performance: Conforms to continuous immersion under the following test condition. Test Condition: 1 month with fresh water and 50 m under the water surface (hydraulic pressure 0.5 MPa). However, adverse conditions such
Quick Start Guide: Rosemount 5408 and 5408:SIS Level ...
www.emerson.com• For installations in hazardous locations, the transmitter must be installed according to the Rosemount 5408 and 5408:SIS Product Certifications document and System Control Drawing (D7000002-885). • Repair, e.g. substitution of components etc., may jeopardize safety and is under no circumstances allowed.