Desmophen 1150 - Dormeco

1 Desmophen 1150page 1 of 3 Edition 2011-11-15 Desmophen Product DatasheetTypebranched, castor oil-based polyolForm suppliedsolvent-free, liquidUsesin the formulation of tough-elastic coatingsSpecificationPropertyValueUnit of measurementMethodIodine color value 5 DIN EN 1557 Acid value 2mg KOH/gDIN EN ISO 2114 Viscosity at 23 C3500 500mPa sDIN EN ISO 3219 53 240/2 Water content 51 777-1 Other data*PropertyValueUnit of measurementMethodEquivalent weightapprox. 360 Density at 20 Capprox. EN ISO 2811 Flash pointapprox. 127 CDIN EN ISO 2719*These values provide general information and are not part of the product 1150page 2 of 3 Edition 2011-11-15 Desmophen Product DatasheetSolubility / thinnabilityGenerally speaking, Desmophen 1150 has good compatibility with thesolvents listed.

2 However, the solutions have to be tested for their storagestability. Desmophen 1150 can be thinned with esters, ketones, ether estersand aromatic storage of a solution with low binder content may result in turbidityand sedimentation. Only PUR grade solvents should be used (< % water).The solvent should not contain reactive speaking, Desmophen 1150 is compatible with polyols and MDIand HDI the many different products on the market, compatibility testing is / ApplicationsIn combination with other polyols such as Desmophen 1145, 1155 andcrosslinked with Desmodur VL, Desmophen 1150 is suitable for use in theformulation of two-component coatings.

3 These are mainly used on concreteand asphalt floors and steel crosslinking and curing of Desmophen 1150 with Desmodur VL, theresultant coatings are tough and flexible, hard-wearing and can also be combined with Desmodur L to formulate highly-resistant calculation of the necessary amount of polyisocyanate at equivalentchemical reaction use following formula:42 x 100 x OH% (solid resin)_____ = polyisocyanate (supply form)17 x NCO% (supply form)42 = molecular weight of NCO group17 = molecular weight of OH groupDesmophen 1150page 3 of 3 Edition 2011-11-15 Desmophen Product DatasheetStorageWhen stored in originally sealed containers the product will remain stable forat least 6 and REACH applicationsThis product data sheet is only valid in conjunction with the latest edition of thecorresponding Safety Data Sheet.

4 Any updating of safety-relevant information in accordance with statutory requirements will only be reflected in the SafetyData Sheet, copies of which will be revised and distributed. Information relatingto the current classification and labeling, applications and processing methodsand further data relevant to safety can be found in the currently valid SafetyData Sheet. This Information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this alsoapplies where proprietary rights of third parties are involved.

5 Our advice does not release you from the obligation to verify the information currentlyprovided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intendedprocesses and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical adviceare beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our GeneralConditions of Sale and Delivery. This does not apply to :Viverso GmbH,D-06731 Bitterfeld-Wolfen, :Loth, ManfredTel.

6 +49 (0)3493/35-8025