Digital Panel Meters Modular Indicator and Controller Type ...

1 Specifications are subject to change without notice UDM35 DS ENG 090112 1 Multi-input Modular instrument 3 1/2 DGT LED RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements: selectable full scales (200 A to 5A) AC/DC voltage measurements: selectable full scales (200mV to 500V) C or F temperature measurements (Pt100-250-500-1000, Ni100, TC J-K-S-T-E) Resistance measurements: selectable full scales (20 to 20k ) Dual rate, speed, frequency and period measurement ( to 50kHz) Up to 4 independent alarm set-points (optional) 20mA/10 VDC analog output (optional) Serial port RS485 or RS232 (optional) MODBUS, JBUS communication protocol Product Description p-based Digital panelmeter, 3 1/2 DGT LED indi-cator, for current, voltage,temperature, resistance,rate, frequency, speed andperiod measurements.

2 Mea-suring ranges and functionseasily programmable fromthe key-pad or from the PCby means of optional Udm-Soft software. UDM35includes storage min-maxfunctions and double levelprotection password. Housing for Panel mountingwith front protection degree:IP67, NEMA12, NEMA4x"Indoor use only". Digital Panel MetersModular Indicator and Controller Type UDM35 Type SelectionSlot A (measuring inputs)LSX:signal inputs: DC/AC; DC/ACLSE/LSF:signal inputs: + DC/AC; DC/ACHSX:signal inputs: DC/AC; 20-200-500V DC/ACTRX:signal inputs: TC tem-perature probes (J-K-S-T-E, Pt100-250-500-1000) and resistance( )TF1 to 50kHz forDC signals: PNP,NPN, NAMUR, TTL,free of voltage, con-tacts, voltages up to14 VDCTF2 to 50kHz forAC signals: pick-up,voltages up to500 VACSlot B (communication)XX:NoneSX:Serial port RS485SY:Serial port RS232AV(*):Single analogue output, 0 to 20mA DC and 0 to 10V DCSlot C (communication and alarm)XX:NoneR1:Single relay output,(AC1-8 AAC, 250 VAC) R2:Dual relay output,(AC1-8 AAC, 250 VAC) R4:Dual relay output, (AC1-8 AAC, 250 VAC) + dualopen collector output(NPN, 100mA)R5:4 relay outputs (AC1-5 AAC, 250 VAC)AV(*).

3 Single analogue output, 0 to 20mA DCand0 to 10V DCSlot D (power supply)H:90 to 260V AC/DCL:18to 60V AC/DC(24 to 48V AC/DC 25% according to UL)3:10to 28V DC(12 to 24V DC 15%according to UL)OptionsXX:NoneTX:TropicalizationModel Slot ASlot BSlot CSlot DOptionsHow to orderUDM35 XXX XX XX X XX Front protection degree: IP67, NEMA12, NEMA4x"Indoor use only" Linearization of Hz inputs up to 16 pointsHow to orderUdmSoft-kitUdmSoft-kit:software plus communication cable for pro-gramming UDM35 by means of :softwarefor programming UDM35/40/60 bymeans of PC, downloadable from (*):The two analogueoutputs cannot beused at the sametime. It is possible toplug in only onemodule by are subject to change without notice UDM35 DS ENG 090112 UDM35 Analogue inputsChannels and variableBQ LSX module1, mA and V DC/ACBQ LSE/LSF module1, mA and V DC/AC + AUXBQ HSX module1, A and V DC/ACBQ TRX module1, temperatureBQ TRX module1, resistanceBQTF1 module2, frequencyBQTF2 module2, frequencyType of inputNPN (DC)Signal level: ON < 2 VDC,OFF open collector (leak-age current <=1mA).

4 PNP (DC)Signal level: ON >10 VDC,OFF open collector (leak-age current <=1mA).NAMUR (DC)Signal level: ON <=1mADC, OFF >= (DC)Signal level: ON >4 VDC,OFF<= of voltage contact(DC)Input load: ON <1kohm,OFF > (AC) up to 100 VACS ignal level: ON > 2 VAC( Vpp).Voltage (AC) up to 500 VACS ignal level: ON > 9 VAC ( Vpp). Digital inputsIncl. in the measuring moduleNumber of inputs 1 (voltage-free)Usekey-pad lockDisplay hold Reset of latch alarmsContact reading signalBQ xxx: < , <3,5V DCBQ LSE/BQ LSF: < , <14V DCBQTF1: <6mA, <7 VDCBQTF2: < , <3 VDCC lose contact resistance Max 1k Open contact resistanceMin 500k (BQTFx: 100k )InsulationNon-insulatedAccuracy (display, RS485)See table Measuring accuracy , temperature drifts and minimum-maximum indications Additional RDG (BQTFx: ),60%to 90% RDG, 62to 440 HzMagnetic RDG (BQTFx: ) @ 400 A/mTemperature driftSee table Measurement accuracy, temperature drifts,and max/min indications Sampling rate500 samples/s @ 50 Hz (escl.)

5 BQTFx)Display refresh time200 msec @ 50Hz (escl. BQTFx)DisplayBQxxx: 3 1/2 DGT, BQTFx: 4 DGT7 segmentsheight mmMax and min indicationSee table Measurementaccuracy, temperature driftsand max min indications MeasurementsCurrent, voltage, tempera-ture, resistance and frequen-cy. For the current and volt-age measurements: TRMS measurement of distortedsine typeDirectCrest factor 3; APmax= ; VPmax= impedanceSee table inputimpedances and overloads Frequency40 to 440 HzOverloadSee table input impedances and overloads CompensationOnly temperature measurement For Pt 100-250-500-1000, 3-wire connection: up to 10 - For resistance measur. with 20 range: up to max - For resistance measurementswith 200 range: up to max 10 TCInternal cold junction, within temperature range from0 to +50 or manual com-pensation from 0 to 50 specificationsMeasurement accuracy, temp.

6 Drifts, max and min indicationsAll accuracies and min/max indications are referred to an ambient temp. range of 25 C 5 C, rel. humidity 60% and scale ratio (electri-cal/displayed scale) equal to 1. The conversion into F is obtained acting on the electrical/displayed scale ratio.*<45Hz >65Hz= ( +3 DGT) 0% to 25% FS; ( +2 DGT) 25% to 110% FS.(<)The min. indication for TRMS measurement (AC or DC) is 0; it is possible to modify the decimal point driftMin. indication (<)Max. indicat. (<)BQ LSX/BQ LSE/BQ LSF-200 A to +200 A-2mA to +2mA-20mA to +20mA-200mV to +200mV-2V to +2V-20V to +20 VDC/ACDC: ( +3 DGT)0% to 25% FS; ( +2 DGT)25% to 110% (da 45 a 65Hz)*: ( +3 DGT)0% to25% FS; ( +2 DGT)25% to 110% FS.

7 150 ppm/ C- + + + + + + are subject to change without notice UDM35 DS ENG 090112 3 UDM35 ModuleInputsTypeAccuracyTemp. driftMin. indication (<)Max. indicat. (<)BQ HSX-200mA to +200mA-2A to +2A-5A to +5A-20V to +20V-200V to +200V-500V to +500 VDC/ACDC: ( +3 DGT)0%to 25% FS; ( +2 DGT)25% to 110% (45 to 65Hz)*: ( +3 DGT)0% to 25% FS; ( +2 DGT)25% to 110% FS. 150 ppm/ C- 500+ + + + + + 500BQ TRXT hermo-couple-50 C to +760 C-58 F to +1400 F-200 C to +1260 C-328 F to +2300 F-200 C to +1000 C-328 F to +1832 F-50 C to +1750 C-58 F to +3182 F-200 C to +400 C-328 F to +752 FJJKKEESSTT ( +1 DGT) ( +2 DGT) ( +2 DGT) ( +4 DGT) ( +2 DGT) ( +4 DGT) ( +2 DGT) ( +4 DGT) ( +2 DGT) ( +4 DGT) 150 ppm/ C- 50 C- 58 F- 200 C- 328 F- 200 C- 328 F- 50 C- 58 F- 200 C- 328 F+ 760 C+ 1400 F+ 1260 C+ 2300 F+ 1000 C+ 1832 F+ 1750 C+ 3182 F+ 400 C+ 752 FMeasurement accuracy, temp.

8 Drifts, max and min indications (cont.)All accuracies and min/max indications are referred to an ambient temp. range of 25 C 5 C, rel. humidity 60%andscale ratio (electri-cal/displayed scale) equal to 1. The conversion into F is obtained acting on the electrical/displayed scale ratio.*<45Hz >65Hz= ( +3 DGT) 0% to 25% FS; ( +2 DGT) 25% to 110% FS.(<)The min. indication for TRMS measurement (AC or DC) is 0; it is possible to modify the decimal point position.(<)It is possible to modify the decimal point position.(*) The min indication is , .., -999999 in case of rotation speed detection functionModuleInputsTypeAccuracyTemp. driftMin. indicationMax. TRXTher-moresis-tance-200 C to +850 C-328 F to +1562 C to + C-328 F to+392 C to + C-328 F to +392 C to + C-328 F to +392 C to + C-328 F to +392 F-60 C to +180 C-76 F to +356 FPt100Pt100Pt100Pt100Pt250Pt250Pt500Pt50 0Pt1000Pt1000Ni100Ni100 ( +2 DGT) ( +4 DGT) ( +5 DGT) ( +5 DGT) ( +5 DGT) ( +5 DGT) ( +5 DGT) ( +5 DGT) ( +5 DGT) ( +5 DGT) ( +1 DGT) ( +2 DGT) 150 ppm/ C- 200- 328- - 60- 76+ 850+ 1562+ + + + + + + + + 180+ 356BQ TRXR esis-tance0 to 20 0 to 200 0 to 2000 0 to ( +2 DGT)25% to 110% FS ( +3 DGT) 0% to 25% FS 150 ppm/ (<) (<)1999(<) (<)BQ TF1 NPN (DC)PNP (DC)NAMUR (DC)TTL (DC)Free of voltage con-tact (DC) RDG 3 digit 50 ppm/ (*) (*)

9 (*)0000 (*) TF2 Pick-up (AC)Voltage (AC) up to100 VACV oltage (AC) up RDG 3 digit 50 ppm/ (*) (*) (*)0000 (*) are subject to change without notice UDM35 DS ENG 090112 UDM35 Input impedances and overloads(*) Maximum measuring current generated for resistance equal to 0 ModuleInputsTypeImpedanceOverload (continuous)Overloads (1s)BQ LSX/ BQ LSE/BQ LSF-200 A to +200 A-2mA to +2mA-20mA to +20mA-200mV to +200mV-2V to +2V-20V to +20 VDC/ACDC/ACDC/ACDC/ACDC/ACDC/AC 2,2k 22 22 2,2k 200k 200k 5mA50mA50mA10V50V50V10mA150mA150mA20V100 V100 VBQ HSX-200mA to +200mA-2A to +2A-5A to +5A-20V to +20V-200V to +200V-500V to +500 VDC/ACDC/ACDC/ACDC/ACDC/ACDC/AC 1 2M 2M 2M TRXT hermo-couple-50 C to +760 C-58 F to +1400 F-200 C to +1260 C-328 F to +2300 F-200 C to +1000 C-328 F to +1832 F-50 C to +1750 C-58 F to +3182 F-200 C to +400 C-328 F to +752 FJJKKEESSTTILK < AMax 5 VMax 10 VBQ TRXT hermo-resistance-200 C to +850 C-328 F to +1562 C to+200,0 C-328 F to +392 C to +200.

10 0 C-328 F to +392 F-60 C to +180 C-76 F to +356 FPt100Pt100Pt250/Pt100Pt250/Pt100Pt1000/ Pt500Pt1000/Pt500Ni100Ni100800 A (*)800 A (*)90 A (*)90 A (*)800 A (*)800 A (*)800 A (*)800 A (*)Max 5 VMax 10 VBQ TRXR esistance0 to 20 0 to 200 0 to 2000 0 800 A (*)90 A (*)800 A (*)90 A (*)Max 5 VMax 10 VBQ TF1 NPN (DC)PNP (DC)NAMUR (DC)TTL (DC)Free of voltage contact(DC)600 W600 W600 W600 W15 VAC/DC15 VAC/DC15 VAC/DC15 VAC/DC15 VAC/DC20 VAC/DC20 VAC/DC20 VAC/DC20 VAC/DC20 VAC/DCBQ TF2 Pick-up (AC)Voltage (AC) up to100 VACV oltage (AC) up to500 VAC220 kW950 kW120 VAC/DC600 VAC/DC200 VAC/DC600 VAC/DCSpecifications are subject to change without notice UDM35 DS ENG 090112 5 UDM35RS422/RS485 (on request) Module: BR SXSerial outputBidirectional (static and dynamic variables).