Transcription of ding to DIN 41773 - Iskratel
1 Datasheet12CP150 Compact-Power Rackline OERLIKON STATIONARY BATTERIES LTD. AESCH BL DORNACHERSTR. 110 CH-4147 AESCH/BL SWITZERLANDPHONE +41 (0) 61 - 706 36 36 FAX +41 (0) 61 - 706 36 37 e-mail: > Compact-Power Rackline > 12CP150QD 2337en/1106/01 Subject to change without notice2/4 Type 12CP150 Part number66300150 Electrical DataNominal voltage 12 VNumber of cells6 Rated capacity C10 to Vpc at 20 C 150 AhRated capacity C8 to Vpc at 25 C 150 AhCurrent/Power for h back-up time Vpc 20 C 185 A 2034 WCurrent/Power for h back-up time Vpc 20 C 107 A 1200 WCurrent/Power for h back-up time Vpc 20 C A 672 WCurrent/Power for h back-up time Vpc 20 C A 381 WCurrent/Power for h back-up time Vpc 20 A 210 WCurrent/Power for h back-up time Vpc 20 C A 174 WCurrent/Power for h back-up time Vpc 20 C A 93 WConversion to capacity at 25 C (77 F)20 C Ah x 1,03 (t > 1 h)Internal resistance ( 10%)
2 To IEC/EN mShort circuit current ( 10%) to IEC/EN 60896-21 kASelf discharge at 20 C to IEC/EN 60896-21 max. 3% / monthHeat loss during float service at 20 C WMechanical DataWeight ready for use kgHeight of monobloc323 mmHeight over gas collection system GCS 338 mmHeight over terminal connector351 mmWidth 125 mmDepth558 mmNumber of terminals 1/1 Dimension of connector screw hole M8 Suggested/maximum cable cross-section 50 mm /70 mm *)Connection torque8 NmTerminal insulation class according to IEC/EN 60529 IP20 Diameter of diagnostic hole for voltage mm Connector (copper, tin-coated) rigid and insulated 40/80 mm Complete connector and terminal connection accessoires available (as 48 V/60 V-Set)Environmental DataShelves, cabinets and racksavailable upon requestInstallationvertically/horizontal lyDistance for cooling and ventilation(preset with the rigid connectors)10 mmFlame retardancy rating case/cover according toUnderwriters Laboratories (UL) USA ABS-PC UL 94 V-0 with LOI > 32%, halogen-freeFlame barriers at ventsinstalledGas collection system GCS UL V-0 qualityavailable upon requestUL file number MH 26065 Service life expected at 20 C15 years *) for UPS duties the connecting cables must be dimensioned speciallyTechnical specificationsOERLIKON STATIONARY BATTERIES LTD.
3 AESCH BL DORNACHERSTR. 110 CH-4147 AESCH/BL SWITZERLANDPHONE +41 (0) 61 - 706 36 36 FAX +41 (0) 61 - 706 36 37 e-mail: > Compact-Power Rackline > 12CP150QD 2337en/1106/01 Subject to change without notice3/4 Operating specificationsTemperature in C Temperature in FPercent of the rated of the battery [ C]1= -2 to -4 mV / C3= -6 mV / C2= 0 mV / CFloat voltage [Vpc]2,402,352,302,252,202,152,102,052,0 0-1001020304050 Figure 3 Figure 1 Figure 2 Battery installation and operationStand-by mode with constant voltage float operationaccording to EN 50272-2:2001 Float voltage setting according to DIN Vpc 1% at 20 to 25 C (68 to 77 F)Float voltage with daily discharge Vpc - Vpc (no correction factor needed)CC-CV charge current according to DIN 41773unlimited, otherwise 3 I10 max.
4 If T > 25 CFloat voltage compensation in function of temperature-2 to -4 mV/ C or with profile as displayed figure 3 Boost chargeNot needed, if desirable then Vpc and l10 max. for 24 h max. at t < 30 CAir exchangeAs a VRLA battery according to EN 50272-2:2001Q= Ncells Igas CAh C10 10- [m /h]Igas= 1 (at Vpc) Igas = 8 (at Vpc) 48 V: m /h = (at Vpc)Preferred operating temperature rangeBetween 15 C (68 F) and 25 C (77 F)Maximum long term operating temperature+40 C (104 F) with ventilation assured (reduced service life)Maximum short term operating temperature (for hours)+50 C (122 F) with ventilation assured (reduced service life)Minimum fully charged operating temperature-40 C (-40 F)OERLIKON STATIONARY BATTERIES LTD. AESCH BL DORNACHERSTR.
5 110 CH-4147 AESCH/BL SWITZERLANDPHONE +41 (0) 61 - 706 36 36 FAX +41 (0) 61 - 706 36 37 e-mail: > Compact-Power Rackline > 12CP150QD 2337en/1106/01 Subject to change without notice4/4 Discharge data Constant current performance (in Amps) to the defined end-of-discharge voltagesVoltage [Vpc]TempDischarge time [Minutes]1 - current performance (in watt per cell) to the defined end-of-discharge voltages Voltage [Vpc]TempDischarge time [Minutes]1.