DMX 512 CONTROLLER SERIES - graphica.ne.jp

1 28 Feb 2009 512 CONTROLLER SERIESDMX-384 BUSER MANUALUSERMANUALThis product manual contains important information about the safe installation anduse of this projector. Please read and follow these instructions carefully and keep thismanual in a safe place for future 512 CONTROLLER you beginWhat are instructionsSafety overviewProduct overview (front)Product overview (rear panel)Common PROGRAMMING (STEPS) MIDI Setting up the Fixture Pan and tilt Copy Review Scene or Entering program Create a Running a Check Editing a Copy a Create a Running a Checking a Edit Chase (Copy Bank Into Chase).. Edit Chase (Copy Scene Into Chase).. Edit Chase (Insert Scene Into a Chase).. Delete a scene in a Delete a Delete all Chase Insert a Copy a Delete a Delete all Running in Running in the systemFade Time APPENDIXDMX PrimerFixture DMX dipswitch quick reference Technical specifications.

2 MANUAL1/1891113 DMX 512 CONTROLLER What are )Controller2) DC 9-12V 500mA, 90V~240V Power Adapter3) Manual4) LED gooseneck upon receiving a fixture, carefully unpack the carton, check thecontents to ensure that all parts are present, and have been received in goodcondition. Notify the shipper immediately and retain packing material for ins-pection if any parts appear damaged from shipping or the carton itself showssigns of mishandling. Save the carton and all packing materials. In the eventthat a fixture must be returned to the factory, it is important that the fixture bereturned in the original factory box and !Please read these instructions carefully, which includes importantinformation about the installation, usage and maintenance .Pleasereadtheseinstructionscarefully,wh ichincludesimportantinformationaboutthei nstallation,usageandmaintenance.

3 * Please keep this User Guide for future consultation. If you sell the unit to another user, be sure thatthey also receive this instruction booklet.* Always make sure that you are connecting to the proper voltage and that the line voltage you areconnecting to is not higher than that stated on decal or rear panel of the fixture.* This product is intended for indoor use only!* To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are noflammable materials close to the unit while operating.* The unit must be installed in a location with adequate ventilation, at least 50cm from adjacentsurfaces. Be sure that no ventilation slots are blocked.* Always disconnect from power source before servicing or replacing lamp or fuse and be sure toreplace with same lamp source.* In the event of serious operating problem, stop using the unit immediately.

4 Never try to repair the unitby yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Pleasecontact the nearest authorized technical assistance center. Always use the same type spare parts.* Don t connect the device to a dimmer pack.* Make sure power cord is never crimped or damaged.* Never disconnect power cord by pulling or tugging on the cord.* Do not operate this device under 113F ambient temperature MANUAL2/18412356910111213141578161718 DMX 512 CONTROLLER * DMX512/1990 Standard* Controls 24 intelligent lights of up to 16 channels, totally 384 channels* 30 banks, each with 8 scenes; 6 chase, each with up to 240 scenes* Record up to 6 chases with fade time and speeds* 16 sliders for direct control of channels* MIDI control over banks, chases and blackout* Built-in microphone for music mode* Auto mode program controlled by fade time sliders*DMXin/out:3pinXRL* LED gooseneck lamp* Plastic end General * Theis a universal intelligent lighting CONTROLLER .

5 It allows the control of24 fixtures composed of 16 channels each and up to 240 programmable chase banks can contain up to 240 steps composed of the saved scenes andin any order. Programs can be triggered by music, midi,automatically or * On the surface you will find various programming tools such as 16 universal channelsliders, quick access scanner and scene buttons, and an LED display indicator foreasier navigation of controls and menu Product Overview (front) (front)USER MANUAL3/18024681048621004862100486210048 6210048621004862100486210048621004862100 4862100486210048621004862100486210048621 0108642010 SEC30 SECA utotriggerMusictriggerSPEEDFADE TIMEB lackoutStepProgramSTEP/TIMEC haseSceneBank0 CHASE 1 CHASE 2 CHASE 3 CHASE 4 CHASE 5 CHASE 6 INTELLIGENT LIGHTING CONTROLLERSCENES 2 SCENES 3 SCENES 4 SCENES 5 SCENES 6 SCENES 7 SCENES 8 SCENES 1 MUSIC BANK COPYTAPSYNC DISPLAYBANK UPPROGRAMMIDI/ADDAUTO/DELBANK DOWNBLACKOUTSCAN:1-12 SCAN.

6 13-24 DMX OPERATORDMX-384 BPAGE SELECTSCAN 1/13 SCAN 2/14 SCAN 3/15 SCAN 4/16 SCAN 5/17 SCAN 6/18 SCAN 7/19 SCAN 8/20 SCAN 9/21 SCAN 10/22 SCAN 11/23 SCAN 12/24161718 Speed faderFade-Time faderThis will adjust the hold time of a scene or a stepwithin a chaseAlso considered a cross-fade, sets the intervaltime between two scenes in a chaseDMX 512 CONTROLLER SERIESItem125789101112131415643 Button or FaderScanner select buttonsScanner indicator LEDSP rogram buttonLED display windowMode Indicator LEDSBankUpbuttonBank Down buttonTap Display buttonBlackout buttonMidi/ADD buttonAuto/Del buttonChaser buttonsMusic/Bank Copy buttonChannel fadersScene select buttonsFunctionFixture selectionIndicates the fixtures currently selectedUsed to enter programming modeStatus window displays pertinent operational dataProvides operating mode status,(manual, music or auto)

7 Function button to traverse Scene/Steps inbanks or chasesFunction button to traverse Scene/Steps inbanks or chasesSets the chase speed by tapping, and toggles betweenvalues and the shutter or dimmer value of all fixtures to0causingall light output to ceaseActivates MIDI external control and also used to confirm therecord/save processUsed to activate Auto mode and as the delete function key duringprogrammingChase memory1~6 Used to activate Music mode and as the copycommand during programmingFor adjusting DMX values, Ch 1~16 can be adjustedimmediately after pressing the respective scannerselect buttonUniversal bump buttons representing scenelocation for storage and selectionUSER MANUAL4/18 Page select buttonIn manual mode, press to toggle between pagesof controlDMX 512 CONTROLLER SERIESItem2124252223 Button or FaderMIDI input portUSB Lamp socketDMX output connectorDC Input jackFunctionFor external triggering of Banks and Chases using aMIDI deviceON/OFF power Product Overview (rear panel) (rearpanel)DMX control signalMain power feedTurns the CONTROLLER on and offUSER MANUALSERIAL NO :SERIAL NO:9V 1000mA9V1000mA21222324255/18 DMX 512 CONTROLLER Common following are common terms used in intelligent light a state by where all lighting fixtures light output are set to 0 or off, usually on a an industry standard digital communication protocol used in entertainment lightingequipment.

8 For more information read SectionsDMX PrimerandDMX Control Modein to your lighting instrument or other device such as a fogger or dimmer of which you a bunch of scenes stacked one after another. It can be programmed as either a singlescene or multiple scenes in static lighting known as also be called programs. A chase consists of a bunch of scenes stacked one to a lighting instrument with a pan and tilt mirror; however, in the ILS-CON CONTROLLER itcan be used to control any DMX-512 compatible device as a generic a standard for representing musical information in a digital format. A MIDI input would provideexternal triggering of scenes using midi device such as a midi to a fixture s ability to function independently of an external CONTROLLER and usuallyin sync to music, due to a built in is used to adjust the time between scenes within a affects the amount of time a scene will hold its state.

9 It is also considered a wait a mechanical device in the lighting fixture that allows you to block the lights path. It is oftenused to lessen the intensity of the light output and to to the process of assigning fixtures a DMX channel be either scenes or chases that are directly called to execution by the user. A playbackcan also be considered program memory that can be recalled during a SETTING UP THE SYSTEM1)Plug the AC to DC power supply to the system back panel and to the mains ) Plug in your DMX cable(s) to your intelligent lighting as described in the fixtures respectivemanual. For a quick Primer on DMX see the DMX Primer section in the Appendix of thismanual. USER MANUAL6/18 FIXTURE ORSCANNER #FIXTURE ORSCANNER #DEFAULT DMX STARTINGADDRESSDEFAULT DMX STARTINGADDRESSBINARY DIPSWITCH SETTINGSSWITCH TO THEON POSITIONBINARY DIPSWITCH SETTINGSSWITCH TO THEON POSITION11321431541651761871982092110221 1231224119317209332254924165257812739728 911330512932114533716135317736911,51,61 ,5,61,71 ,5,71 ,6,71 ,5,6,71,81 ,6,81,5,6,81,7,81,5,7,81,6,7,81,5,6,7,81 ,91,5,91,6,91,5,6,91,7,91,5,7,91,6,7,91, 5,6,7,91 ,5,8 DMX 512 CONTROLLER FIXTURE ADDRESSINGT heis programmed to control 16 channels of DMX per fixture, therefore the fixtures youwish to control with the correspondingbuttons on the unit, must be spaced 16 refer to your individual fixture s manual for DMX addressing instructions.

10 The table aboverefers to a standard 9 dipswitch binary configurable PAN AND TILT not all intelligent lighting fixtures are alike or share the same control attributes,theallows the user to assign the wheel the correct pan and tilt channel forevery individual fixtureControllerAction :Action:1) Press and hold&different DMX channel. Faders are givena channel buttons together (1) time toaccess the number and are labeled on thesurface of the channel assignment )Press abutton orbutton that represents the fixture whosefaders you would like to SELECTN otes :Notes:All pan/tilt can be reassigned to output on adifferent DMX AUTO/DEL buttons to delete the channelassignment MANUAL7/18 DMX 512 CONTROLLER SERIESN otes : COPY SCANNERE xample: Copying Scanner 1 into Scanner 2 Action :Action:2)While holding button#1pressbutton# ) Press and holdbutton # )Releasebutton#1firstbeforereleasingbutt on # :Notes:4)AllLED indicators will flash to confirmsuccessful save time, you can copy the settings of oneScanner button to RESETTING THE :Action:2)Press and hold BANK UP and )Turn off the )Turn on power to the unit (while still holdingBANK UP and AUTO/DEL).