Example: dental hygienist

DNVGL-ST-0378 Offshore and platform lifting appliances

The electronic PDF version of this document, available at the DNV GL website , is the official, binding GL ASSTANDARDDNVGL-ST-0378 Edition July 2019 Amended September 2019 Offshore and platform lifting appliancesFOREWORDDNV GL standards contain requirements, principles and acceptance criteria for objects, personnel,organisations and/or operations. DNV GL AS July 2019 Any comments may be sent by e-mail to service document has been prepared based on available knowledge, technology and/or information at the time of issuance of thisdocument. The use of this document by others than DNV GL is at the user's sole risk. DNV GL does not accept any liability or responsibilityfor loss or damages resulting from any use of this document. Changes - currentStandard DNVGL-ST-0378 . Edition July 2019, amended September 2019 Page 3 Offshore and platform lifting appliancesDNV GL ASCHANGES - CURRENTThis document supersedes the May 2016 edition of in this document are highlighted in red colour.

structures. General feedback and experiences Sec.2 DNVGL LA4 introduced as acceptable certificate form. Load combinations due to vessel motions App.C Specific load combinations in the text are replaced with reference to DNVGL-RU-SHIP Pt.3 Ch.4 Sec.3 [3.3.4]. Personnel lifting Sec.11 Prohibition of wireless control removed, added a new

Tags:

  Structure

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of DNVGL-ST-0378 Offshore and platform lifting appliances

1 The electronic PDF version of this document, available at the DNV GL website , is the official, binding GL ASSTANDARDDNVGL-ST-0378 Edition July 2019 Amended September 2019 Offshore and platform lifting appliancesFOREWORDDNV GL standards contain requirements, principles and acceptance criteria for objects, personnel,organisations and/or operations. DNV GL AS July 2019 Any comments may be sent by e-mail to service document has been prepared based on available knowledge, technology and/or information at the time of issuance of thisdocument. The use of this document by others than DNV GL is at the user's sole risk. DNV GL does not accept any liability or responsibilityfor loss or damages resulting from any use of this document. Changes - currentStandard DNVGL-ST-0378 . Edition July 2019, amended September 2019 Page 3 Offshore and platform lifting appliancesDNV GL ASCHANGES - CURRENTThis document supersedes the May 2016 edition of in this document are highlighted in red colour.

2 However, if the changes involve a whole chapter,section or subsection, normally only the title will be in red Amendment September 2019 The following change descriptions were left out in the July 2019 publication. No changes have been made tothe content of the document, except for [ ].TopicReferenceDescriptionAlarms for subsea operations[ ]Added a relaxation on the 90% SWL audible for control andmonitoring[ ] and [ ]Removed certification requirement for control forming of materials[ ]Clarified approach and acceptance criteria for distinction between lifting appliances vs feedback LA4 introduced as acceptable certificate combinations due tovessel load combinations in the text are replaced withreference to DNVGL-RU-SHIP [ ].Personnel of wireless control removed, added a newrequirement for lifting gear and added acceptance of specialmotion compensation to new DNVGL documents[ ] and [ ]Added reference to DNVGL-RP-0232 Pipeline and cable layingequipment and [ ] in DNVGL-CG-0197 Additivemanufacturing - qualification and certification process formaterials and wire rope anchorage[ ] and [ ]For cranes with radius dependent load curves the end stopshall be duplicated based on different technologies (electric/mechanical) or an alarm shall be provided to crane operatorin case of monitoring systems forsubsea operations[ ]New system: Auto stopTable 7-1 and Table 8-1 Table 7-1 added for emergency stop.

3 Table 8-1 removed forfire/gas and spooling devicesfor subsea operations[ ]Additional requirements addressing sheaves and requirements[ ]Specific requirements in the text removed, and replaced withreference to testing with use ofsimulators[ ]Requirement for simulator testing and recovery systemsfor requirements in the text replaced with references toDNVGL-OS-E402. Changes - currentStandard DNVGL-ST-0378 . Edition July 2019, amended September 2019 Page 4 Offshore and platform lifting appliancesDNV GL ASChanges July 2019 TopicReferenceDescriptionGeneral feedback references to OLA 101 certificate form are replaced withcorrect form number OLA testing with use ofsimulators[ ]New subsection introduced defining criteria and methods foruse of simulators in software correctionsIn addition to the above stated changes, editorial corrections may have been made.

4 ContentsStandard DNVGL-ST-0378 . Edition July 2019, amended September 2019 Page 5 Offshore and platform lifting appliancesDNV GL ASCONTENTSC hanges - 1 General Certification Type of 2 Documentation and 29 Section 3 Materials and Rolled structural steel for Rolled steel not for Steel Steel Iron Steel tubes, pipes and Aluminium alloy Composite Steel wire Manufacturing and 45 Section 4 Structural design and Design Cases of Strength Design and strength of particular 5 Machinery and Basic Power Electrical installations, equipment and Hydraulic, pneumatic, instrumentation, automation and wirelessremote-control ContentsStandard DNVGL-ST-0378 . Edition July 2019, amended September 2019 Page 6 Offshore and platform lifting appliancesDNV GL ASSection 6 Safety and safety 7 platform Material and Structural Machinery and Safety and safety 8 Offshore Material and Structural Machinery and Safety and safety 9 Cranes intended for subsea Structural Machinery and 10 Heavy lift Structural Safety and safety Machinery and 11 lifting of Machinery and 12 Launch and recovery systems for Structural Machinery and ContentsStandard DNVGL-ST-0378 .

5 Edition July 2019, amended September 2019 Page 7 Offshore and platform lifting appliancesDNV GL ASSection 13 Launch and recovery arrangement for Machinery and Safety and safety 14 Testing and Functional testing of completed lifting Load Periodical Testing of steel wire Marking and Control and monitoring A Wind loads on Wind load B Marking of single-sheave C Ship mounted cranes without jib support in transit Example on checking for compliance with the D Examples on basis for acceptance of works product Transmission gears for platform Hydraulic cylinders exempted from the Society's E Examination of pad eyes and F Register and certificate List Sample G Verification guideline for safety Application, scope and Verification DNVGL-ST-0378 .

6 Edition July 2019, amended September 2019 Page 8 Offshore and platform lifting appliancesDNV GL ASSECTION 1 GENERAL This standard provides requirements for certification and verification of cranes intended for loadhandling outside vessel while at sea ( Offshore cranes), load handling onboard Offshore units/installations( platform cranes) and pipeline and cable laying equipment (see DNVGL-RP-0232 for criteria and guidancefor certification and verification of the design, materials, safety system and testing of the pipeline and cablelaying equipment).Guidance note:Cranes for load handling within and outside ships while in harbour and in sheltered waters and within ships at sea, please seeDNVGL-ST-0377 Shipboard lifting This standard covers the design, materials, fabrication, installation, testing and commissioning ofoffshore cranes, platform cranes and pipe/cable laying categorization of lifting appliances is based on installation and intended function for the lifting appliance:a) Offshore cranes: lifting appliances on board vessels (including wind turbine installations) intended for load handlingoutside vessels while at open ) platform cranes.

7 lifting appliances onboard Offshore units/installations intended for load handling within and outsidethe unit/installation while in harbour and sheltered waters and within the unit/installation while )Pipeline and cable laying equipment: equipment onboard vessels intended for pipeline (rigid pipe and flexible pipe) and cable (cable andumbilicals) laying, retrieving and maintenance operations while at open note:Cranes intended for operating from an Offshore unit/installation in jacked up condition to other fixed installation are categorized asplatform Each lifting appliance has its separate intended functions. Examples of intended functions are, butnot limited to: cargo handling within deck area on board Offshore units/installations loading and discharging of Offshore supply vessels launch and recovery of diving systems launch and recovery of ROV loading and discharging from sea or sea bed personnel handling pipeline and cable laying, retrieving and maintenance DNVGL-ST-0378 .

8 Edition July 2019, amended September 2019 Page 9 Offshore and platform lifting appliancesDNV GL Requirements presented herein are minimum requirements to be satisfied, although subject toacceptance by the Society, other minimum requirements may be agreed based on new technologyavailable at the time of application for The requirements of this standard may be supplemented with additional requirements whereinstallation of specific design or assessment shows that standards that provides equivalent or higher level ofintegrity and safety are more The standard consists of a three-level hierarchy of )General principles (This section and section 2)2)Technical provisions ( )3)Examples and sound engineering practice ( ) This standard shall be applied for certification of Offshore cranes and platform cranes for vessels withclass notations Crane vessel, Crane, Crane- Offshore or Crane- Offshore (N).

9 This standard may also beapplied as voluntary basis for verification and certification of lifting appliances that are not classed with standard shall be applied for certification of cranes onboard ships and Offshore units carrying outoffshore crane operations, also with respect to additional functionality related to internal handling andharbour operations in accordance with cranes solely carrying out shipboard crane operations onboard ships, certification shall be in accordancewith and cable laying equipment and systems are also included in the lifting appliances concept. The notationPipe laying vessel and Cable laying vessel may be granted to a vessel specially intended for pipeline andcable laying operations and for that purpose fitted with laying systems certified by the Society as specified inDNVGL-RU-SHIP note:The standard may also be applied to mobile cranes, crane that are transported by vehicle or other means from one location toanother, and cranes that can move long distances by road by means of their own machinery and wheel arrangement.

10 In the lattercase the moving machinery and its arrangement as well as the overturning stability of the mobile crane are not covered by The requirements presented herein should be applied consequently from concept design through thefinal construction, including major Specifications of the services provided by this standard are given in [ ] and [ ]. The standard does not apply to cable cranes, personnel lifts (elevators), jacks, overhead drillingequipment, fork lifts, portable hoisting gear Personnel lifting with cranes otherwise designed for lifting of loads/cargo may be covered appliances rated to a safe working load of less than 10 kN will be especially Without prejudice to [ ], deviations from the requirements given in this standard may onlybe substituted where shown to provide an equivalent or higher level of integrity or safer than under DNVGL-ST-0378 .


Related search queries