Double Block and Bleed Valves - Bonney Forge®

1 Double Block and Bleed Valves BFE AVAILABLE CATALOGUES. Forged Valves Cast Steel Valves Forged Pressure Seal Valves API 6A Valves Forged Floating Ball Valves Trunnion Mounted Ball Valves Double Block & Bleed Valves Global quality. Total reliability. Two re- current claims in present-day corporate strategies. But the transition from words to actions demands tangible measures. Specialization and organization underlie what amounts to a quality culture at BFE, not in the abstract but as a set of specific rules governing every stage of production. An operating model that is good to have in a partner who bears the responsability of supplying Valves that are essential to plant safety and regulation.

2 DESIGN, CONSTRUCTION, MARKING FOR Double Block & Bleed Valves . PRODUCT OVERVIEW Benefits include reduction of development BFE manufactures the most complete line of time and costs, improved product quality, and quality Double Block & Bleed Valves , and can ability to solve field problems for customers. provide the exact Double Block & Bleed Valves Product flexibility and accuracy is assured. and actuators to meet the most demanding application requirements. Finite Element Analysis (FEA) is a very Our Double Block & Bleed Valves are available important step of the development stage in an extensive range of designs, materials, and ensures the best possible performance sizes and pressure classes and are in full con- requirements.

3 Valves operational problems, formance with ASME, API and NACE specifica- pressure/temperaturerelated deformations tions. and flow-related forces within a valve can be anTi-STaTic device All Double Block & Bleed Valves are designed evaluated. In order to prevent static electricity which may in accordance with ASME and where light the fluid, static-conduction spring is set applicable with API 6D or BS EN ISO 17292. BFE uses the FEA for predicting failure due to between the stem and the ball. unknown stresses by showing problem areas The BFE family of Double Block & Bleed Valves in a material and allowing designers to see all anTi blow-ouT prooF STem provides positive shut-off of fluids and gases of the theoretical stresses within.

4 This method The stem is designed with integral T-Type under extreme service conditions. of product design and testing is far superior to shoulder to provide blow-out proof effectively. the manufacturing costs which would accrue The design assures that the stem can not be BFE uses only high-quality materials inspected if each sample was actually built and tested. blown out of the valve in the case of the pack- & tested to International Standards and uti- ing being removed while the valve is under lizes advanced manufacturing technology with During any analysis project, it is the responsi- pressure. special emphasis on safety, quality, and long bility of the BFE analyst to verify that analysis service life of our products, to ensure that our results conform to the physics of the problem conTrolled STem & STuFFinG box FiniSh clients receive the best in class products under study.

5 Understanding the response of Stem and stuffing box finish machining is a available from us at a competitive price and a structure or manufactured product allows key point of control. The stem is made by cold delivered on time. effective design decisions to be made in de- rolling and stem surface finish is controlled veloping structures and products that are func- by Ra= , which can reduce friction of stem The forging material can ensure the best rigid- tional, meet all engineering requirements, and movement and ensure the seal. The stuffing ity and strength under maximum rated opera- can be manufactured and assembled. box surface is controlled within Ra= for bet- tion pressure without inherent flaw of cast.

6 Ter sealing performance. Other properties found in forging include Computational Fluid Dynamics (CFD) is used greater impact resistance, resistance to fatigue to simulate operating flow conditions. Solid ball cracking, particularly when cycling at either Evaluation of Valve CV coefficient and convec- The solid ball used by BFE provides straight- high or cryogenic temperature. Overdesigned tive heat transfer coefficient takes place at the through flow and real full-port performance wall thickness and adaptation of high strength design stage. characteristics. Hollow ball or cored cavity ball tie bolts are convenient for valve maintenance are not used for BFE products.

7 And sufficient to bear the stress of pipe. The internal parts of valve are carefully de- MAIN FEATURES lonGeviTy oF liFe signed and selected to ensure reliability under Special consideration was devoted to the at- all kinds of work conditions. Fire-SaFe TeST approved tainment of enhanced life and operation of our BFE Double Block & Bleed Valves are designed valve throughout design, development, testing Since a variety of materials are available, BFE in accrdance with API 607 & API SPEC 6FA. and manufacturing stages. Valves can be used with various fluids and gas- Valve designs combined with the selection of es including petroleum based oils and some Double body GaSkeT advanced materials are such that long periods water glycols.

8 All BFE Double Block & Bleed Valves are of inactivity should not affect the operations equipped with two body gasket. The first body of efficiency. BFE Double Block & Bleed Valve design is gasket is in soft material and the second in developed using the latest software based graphite (if not otherwise required), this com- low Torque ouTpuT. analysis tools. bination assures the best seal characteristic in Seat designs, stem-bearing system and stem At the design stage, all projects are analysed whatever corrosive service as well as giving a seal arrangements ensure consistent minimal using 3D solid modeling tools. fire safe design.

9 Torque values. Cat_DOUBLE_B&B_2010_Ok:Cat_DOUBLE_B&B_20 10 9-06-2010 11:33 Pagina 5. FLOW CAPACITY BFE locking device can lock the valve in either Every valve is subject to a pressure test in Valve design allows for high flow capacity in the open or closed position and cannot be accordance with the standard API 598 or BS. liquid or gas services regardless of whether breached by removing the lever. 6755 Part-1. the media is clean or dirty. Full port Valves The rated pressure for the applicable pressure allow for pigging and ensure maximum flow class is in accordance with ASME /. capacity. EN 12516-1/2. INSPECTION AND TESTING. FIELD REPARAIBLE Every valve is subjected on routine basis to Simple user friendly design allows for quick different non-destructive testing, like dye pen- and easy part replacement requiring minimal etrant test on butt weld ends and on all hard MARKING AND IDENTIFICATION.

10 "Down Time". faced and cladding areas. Each valve is identified on proper name plate Non-destructive test are also carried out on and on valve body as required by MSS-SP. ISO FLANGE INTEGRATED IN THE BODY the critical areas as defined by ASME 25, ASME Name plate carries all DESIGN Optional examinations like: information on rating, size, valve body and ISO 5211 mounting always integrated in the Radiographic trim material, customer tags. valve as standard design. Magnetic particicles On body, marking includes material Ultrasonic designations (per ASTM) and heat code and LOCKING DEVICE Helium leak test of course the trade mark. Locking device is supplied as standard in order Personal performing NDT are trained and qual- to prevent unauthorized opening/closing.