Example: barber

Draft ETSI EN 303 446-2 V1.1

Draft ETSI EN 303 446-2 (2017-03) ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment; Part 2: Specific conditions for equipment intended to be used in industrial locations; Harmonised Standard covering the essential requirements of article (b) of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI Draft ETSI EN 303 446-2 (2017-03)2 Reference DEN/ERM-EMC-356 Keywords EMC, emission, harmonised standard, immunity ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistr e la Sous-Pr fecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: The present document may be made available in electronic versions and/or in print.

ETSI 6 Draft ETSI EN 303 446-2 V1.1.0 (2017-03) 1 Scope The present document defines requirements in respect of ElectroMagnetic Compatibility (EMC) under article 3.1(b) of

Tags:

  Scopes, 1 scope

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Draft ETSI EN 303 446-2 V1.1

1 Draft ETSI EN 303 446-2 (2017-03) ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment; Part 2: Specific conditions for equipment intended to be used in industrial locations; Harmonised Standard covering the essential requirements of article (b) of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI Draft ETSI EN 303 446-2 (2017-03)2 Reference DEN/ERM-EMC-356 Keywords EMC, emission, harmonised standard, immunity ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistr e la Sous-Pr fecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: The present document may be made available in electronic versions and/or in print.

2 The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at If you find errors in the present document, please send your comment to one of the following services: Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI.

3 The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3 GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3 GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI Draft ETSI EN 303 446-2 (2017-03)3 Contents Intellectual Property Rights .. 4 Foreword .. 4 Modal verbs terminology .. 4 Introduction .. 4 1 scope .. 6 2 References .. 6 Normative references.

4 6 Radio EMC standards .. 6 Non-radio EMC standards .. 7 Other EMC 9 Informative references .. 9 3 Definitions and abbreviations .. 9 Definitions .. 9 Abbreviations .. 11 4 EMC requirements .. 11 Introduction .. 11 Emissions requirements .. 11 Radiated Emissions .. 11 Conducted Emissions .. 12 Special provisions .. 12 AC Power port .. 12 PLC port .. 12 DC power port .. 12 Wired network port .. 12 Antenna Port.

5 12 Immunity requirements .. 13 General .. 13 Configuration of the equipment during immunity tests .. 13 Performance criteria .. 13 Radiated Immunity .. 13 Electrostatic discharge .. 14 Fast transients, common mode .. 14 Radio frequency, common mode .. 14 Voltage dips and interruptions .. 14 Surges .. 14 Other immunity tests .. 14 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU .. 15 Annex B (informative): Use of industrial equipment in residential locations .. 17 Annex C (informative): Exclusion 18 Annex D (informative): Change History.

6 19 History .. 20 ETSI Draft ETSI EN 303 446-2 (2017-03)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server ( ). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document.

7 Foreword This Draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN Approval Procedure. The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [ ] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [ ]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive and associated EFTA regulations.

8 Proposed national transposition dates Date of latest announcement of this EN (doa): 3 months after ETSI publication Date of latest publication of new National Standard or endorsement of this EN (dop/e): 6 months after doa Date of withdrawal of any conflicting National Standard (dow): 18 months after doa Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is based on the principles given in ETSI EG 203 367 "Guide to the application of harmonised standards covering articles and of the Directive 2014/53/EU (RED) to multi-radio and combined radio and non-radio equipment" [ ].

9 For the equipment in the scope of the present document, it contains all requirements for showing compliance of the combined and/or integrated equipment with RED [ ], article (b). For this purpose, normative references to the appropriate product standards are provided for the radio part(s) as well as for the non-radio part(s) of the combined and/or integrated equipment. ETSI Draft ETSI EN 303 446-2 (2017-03)5 Furthermore it is determined which additional measurements, emission limits or performance criteria are necessary for the combination of a non-radio and a radio product (which is called " " in ETSI EG 203 367 [ ]). Requirements for RED [ ], article (effective use of the spectrum) are not in the scope of the present document. In contrast to ETSI EG 203 367 [ ] the present document has been developed with the target to be listed under the RED [ ].

10 ETSI Draft ETSI EN 303 446-2 (2017-03)61 Scope The present document defines requirements in respect of ElectroMagnetic Compatibility (EMC) under article (b) of Directive 2014/53/EU [ ] for combined and/or integrated equipment intended to be operated within industrial locations. The present document is only applicable to combined and/or integrated equipment where the radio function is within the scope of one or more of the standards listed in clause and where the non-radio function is within the scope of one or more of the standards listed in clause NOTE: Requirements applicable to the antenna port specifically related to the efficient use of radio spectrum are not included in the present document. These requirements are found in the applicable product standard(s) for the effective use of the radio spectrum under article of Directive 2014/53/EU [ ].


Related search queries