Transcription of DROP FORGED LIFTING EYES - chicagohardware.com
1 Chicago Hardware and Fixture CompanySince 191222 METRIC MACHINERY EYE InchesAThreadSizeBShankLength, , mmApprox. 100 Limitin Limitin 5M61/4"M6 x 3M75/16"M7 x 1M83/8"M8 x 9M107/16"M10 x ,62813885 7M121/2"M12 x ,0302,26613905 2M149/16"M14 x ,6003,52013925 0M165/8"M16 x ,6003,52013948 9M183/4"M18 x ,1404,70813968 7M207/8"M20 x ,8606,29213988 5M241"M24 x ,8508,47014008 9M271-1/8"M27 x ,20011,44014031 7M301-1/4"M30 x ,40014,08014051 5M361-1/2"M36 x ,97019,734 FORGED CARBON STEEL SELF-COLORED SHOULDER PATTERND imensions in Millimeters Some Sizes Availablein Stainless Steel on a Special FORGED LIFTING EYESM adeinUSALIFTING EYES SELF-COLOREDDrop FORGED from C-1035 steel, heat treated. Available blank or threaded. Self-colored finish isstandard; hot galvanized or other finishes supplied on a special basis.
2 Used in liftingapplications where larger eyes are required. When ordering prefix stock number with letter B (blank) or T (threaded) as required. Loads are based on a safety factor of 5 to 1. Workingloading limits for LIFTING eyes are based on a straight vertical lift in a gradually increasingmanner, and should never be used for angular Load LimitC-1861/4"15005 715505 2860C-1875/16"15010 115510 61260C-1853/8"15015 615515 12200C-1811/2"15020 015520 53600C-1845/8"15025 515525 05200C-1883/4"15030 915530 47000 StockShankDimensions InchesThreadNumberHLACBEFGSRL engthBlankThreadedC-1865/16"1"1-1/4"3/4" 1-1/16"19/32"1/2"3/8"1/4"2-11/16"7/8"121 1C-1873/8"1-1/8"1-5/8"1"1-1/4"3/4"9/16"1 /2"5/16"3-3/16"1"2222C-1851/2"1-1/4"2"1- 1/4"1-1/2"1"13/16"5/8"3/8"3-3/4"1-1/8"41 38C-1815/8"1-1/2"2-1/2"1-1/2"2"1-3/16"1" 11/16"1/2"4-11/16"1-3/8"8174C-1843/4"1-7 /8"3"1-3/4"2-3/8"1-3/8"1-1/8"7/8"5/8"5-3 /4"1-3/4"139129C-1887/8"2"3-1/2"2"2-5/8" 1-5/8"1-5/16"15/16"3/4"6-5/16"1-7/8"2222 14 Weight Per 100 MadeinUSA
