Example: quiz answers

DuPont Kapton 150FWR019

DuPont Kapton 150 FWR019 Insulation SubstrateDescriptionDuPont Kapton 150 FWR019 is a heat fusiblepolyimide-FEP fluoropolymer composite film thathas a unique balance of excellent electrical, thermaldurability, and chemical resistance properties. Theproperties of 150 FWR019 will provide a tough, highdielectric strength insulation with significantlyimproved hydrolysis resistance compared to othercommonly used polyimide Excellent hydrolysis resistance UL 94 recognition: V-0 High dielectric strength Tough Heat fusibleConstructionsKapton 150 FWR019 film is constructed of mil Kapton polyimide film with mil ofFEP fluoropolymer on one side (see Figure 1).PackagingKapton 150 FWR019 insulation substrate is sup-plied in tape widths ranging from inches inches wide in traverse wound rolls. Pad rollsare available in inches to 50 inches of Kapton 150 FWR019 ProcessingKapton 150 FWR019 can be properly processedon most tape wrapping machines.

DuPont ™ Kapton ® 150FWR019 Insulation Substrate Description DuPont™ Kapton® 150FWR019 is a heat fusible polyimide-FEP fluoropolymer composite film that has a unique balance of excellent electrical, thermal

Tags:

  Dupont, Kapton, Dupont kapton, Dupont kapton 150fwr019, 150fwr019, 174 150fwr019

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of DuPont Kapton 150FWR019

1 DuPont Kapton 150 FWR019 Insulation SubstrateDescriptionDuPont Kapton 150 FWR019 is a heat fusiblepolyimide-FEP fluoropolymer composite film thathas a unique balance of excellent electrical, thermaldurability, and chemical resistance properties. Theproperties of 150 FWR019 will provide a tough, highdielectric strength insulation with significantlyimproved hydrolysis resistance compared to othercommonly used polyimide Excellent hydrolysis resistance UL 94 recognition: V-0 High dielectric strength Tough Heat fusibleConstructionsKapton 150 FWR019 film is constructed of mil Kapton polyimide film with mil ofFEP fluoropolymer on one side (see Figure 1).PackagingKapton 150 FWR019 insulation substrate is sup-plied in tape widths ranging from inches inches wide in traverse wound rolls. Pad rollsare available in inches to 50 inches of Kapton 150 FWR019 ProcessingKapton 150 FWR019 can be properly processedon most tape wrapping machines.

2 It can be fusedusing either induction or radiant heat. Kapton FWRfilms have a higher modulus and lower water vaporpermeability than equivalent Kapton FN films. Thewire wrapping and sealing process may have to bemodified to compensate for these properties for Kapton 150 FWR019 areshown in Table Conditions/Shelf LifeProper storage of Kapton film will ensure itsperformance. Kapton 150 FWR019 should notbe exposed to ultraviolet radiation as from directsunlight or in conditions of high humidity forextended periods of time. The storage life will bedecreased dramatically under these shelf life for Kapton in typical warehousetemperature will be in excess of 20 years. Rollsshould be kept wrapped in storage to preventsurface HandlingProper care should be taken when handling Kapton polyimide mil of Teflon FEP fluoropolymer1 mil thick improvedhydrolysis resistantDuPont polyimideTechnical InformationH-78312 (11/01) Printed in High Performance Materials Rt.

3 23 & DuPont Road Circleville, OH 43113(800) 237-4357 Visit us on the Internet at: information given herein is based on data believed to be reliable, but DuPont makes no warranties express or implied as to its accuracy and assumesno liability arising out of its use by others. This publication is not to be taken as a license to operate under, or recommendation to infringe, any : Do not use in medical applications involving permanent implantation in the human body. For other medical applications, see DuPont MedicalCaution Statement, 2001 du Pont de Nemours and Company. All rights and Teflon are registered trademarks of 1 Typical Properties of Kapton 150 FWR019 PropertyTypical ValueTest MethodMechanicalTensile Strength, D-882 Tensile Modulus, Kpsi/Gpa500 D-882 Elongation to break, %60 ASTM D-882 Specific Gravity, D-1505-90 Thickness, Strength, kV/mil (kV/mm) (212)ASTM D-149 Dielectric Constant at D-150 Dissipation D-150 Volume , polyimide, CnoneASTM E-794 Meltpoint, FEP, C270 ASTM E-794 Flammability, UL rating94V-0UL-94 Mechanical, C200 Electrical, C240 LOI, %>35 ASTM D-2863 Glass Transition Temperature, C350 Chemical (polyimide only)Moisture Absorption at 100% RH, % D-570 Water Vapor Permeability, gm/m2 E-96 Hydroscopic Coefficient of Expansion, ppm/ % RH9 DuPont


Related search queries