Example: stock market

DuPont Rynitefi PET - cpinfo.net

Product Information DuPont Rynite PET. thermoplastic polyester resin Rynite FR530 NC010 . Rynite FR530 NC010 is a 30% glass reinforced, flame retardant, modified polyethylene terephthalate resin approved by UL as UL94V-0 @ It has an outstanding balance of properties, temperature index and flow characteristics. Property Test Method Units Value Identification Resin Identification ISO 1043 PET-GF30FR(17). Part Marking Code ISO 11469 >PET-GF30FR(17)<. Mechanical Stress at Break ISO 527 MPa (kpsi) 135 ( ). Tensile Strength ASTM D 638 MPa (kpsi). -40 C (-40 F) 193 ( ). 23 C (73 F) 138 ( ). 90 C (194 F) ( ). 150 C (300 F) ( ). Strain at Break ISO 527 % 2. Elongation at Break ASTM D 638 %. -40 C (-40 F) 23 C (73 F) 90 C (194 F) 150 C (300 F) Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.

Product Information DuPontŽ Rynitefi PET thermoplastic polyester resin Rynitefi FR530 NC010 Identification Resin Identification ISO 1043 PET-GF30FR(17) Part Marking Code ISO 11469 >PET-GF30FR(17)<

Tags:

  Dupont, Rinses, Polyester, Polyester resin, Dupont rynitefi pet, Rynitefi, Rynitefi pet

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of DuPont Rynitefi PET - cpinfo.net

1 Product Information DuPont Rynite PET. thermoplastic polyester resin Rynite FR530 NC010 . Rynite FR530 NC010 is a 30% glass reinforced, flame retardant, modified polyethylene terephthalate resin approved by UL as UL94V-0 @ It has an outstanding balance of properties, temperature index and flow characteristics. Property Test Method Units Value Identification Resin Identification ISO 1043 PET-GF30FR(17). Part Marking Code ISO 11469 >PET-GF30FR(17)<. Mechanical Stress at Break ISO 527 MPa (kpsi) 135 ( ). Tensile Strength ASTM D 638 MPa (kpsi). -40 C (-40 F) 193 ( ). 23 C (73 F) 138 ( ). 90 C (194 F) ( ). 150 C (300 F) ( ). Strain at Break ISO 527 % 2. Elongation at Break ASTM D 638 %. -40 C (-40 F) 23 C (73 F) 90 C (194 F) 150 C (300 F) Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.

2 ISO Mechanical properties measured at , ISO Electrical properties measured at , and all ASTM properties measured at Test temperatures are 23 C unless otherwise stated. Shrinkage generated per ISO 294-4 based on 60 X 60mm end-gated plagues or ASTM D 955 based on 76 X 127mm (3 X 5in) end-gated plaques. The DuPont Oval Logo, DuPont , The miracles of science and Rynite are trademarks or registered trademarks of DuPont Company. Copyright 2006. 060202/060203. The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated.

3 These data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.

4 DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see " DuPont Medical Caution Statement", H-50102. 1/7. Product Information Rynite FR530 NC010 . Property Test Method Units Value Mechanical Tensile Modulus ASTM D 638 MPa (kpsi). -40 C (-40 F) 12500 (1810). 23 C (73 F) 11000 (1590). 90 C (194 F) 5580 (809). 150 C (300 F) 3890 (564). Tensile Modulus ISO 527 MPa (kpsi) 11500 (1670). Shear Strength ASTM D 732 MPa (kpsi) ( ). Poissons Ratio Flexural Modulus ASTM D 790 MPa (kpsi). -40 C (-40 F) 11000 (1600).

5 23 C (73 F) 10300 (1500). 90 C (194 F) 4650 (674). 150 C (300 F) 2650 (384). Flexural Modulus ISO 178 MPa (kpsi) 10500 (1520). Flexural Strength ASTM D 790 MPa (kpsi). -40 C (-40 F) 262 ( ). 23 C (73 F) 200 ( ). 90 C (194 F) 107 ( ). 150 C (300 F) ( ). Compressive Strength ASTM D 695 MPa (kpsi) 200 ( ). Deformation Under Load ASTM D 621 %. 23 C (73 F), (4000psi) 50 C (122 F), (4000psi) Flexural Fatigue ASTM D 671 MPa (kpsi). Cycles 10E6 ( ). Flexural Creep Strain ASTM D 2990 %. 23 C (73 F), (4000psi) 60 C (140 F), (4000psi) 125 C (257 F), (4000psi) Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at , ISO Electrical properties measured at , and all ASTM properties measured at Test temperatures are 23 C unless otherwise stated.

6 Shrinkage generated per ISO 294-4 based on 60 X 60mm end-gated plagues or ASTM D 955 based on 76 X 127mm (3 X 5in) end-gated plaques. The DuPont Oval Logo, DuPont , The miracles of science and Rynite are trademarks or registered trademarks of DuPont Company. Copyright 2006. 060202/060203. The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated;. these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.

7 The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products.

8 Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see " DuPont Medical Caution Statement", H-50102. 2/7. Product Information Rynite FR530 NC010 . Property Test Method Units Value Mechanical Notched Izod Impact Strength ISO 180/1A kJ/m2. -40 C (-40 F) 8. -30 C (-22 F) 8. 23 C (73 F) 9. Izod Impact ASTM D 256 J/m (ft lb/in). -40 C (-40 F) 80 ( ). 23 C (73 F) 91 ( ). Unnotched Impact ASTM D 4812 J/m (ft lb/in). -40 C (-40 F) 535 ( ). 23 C (73 F) 585 ( ). 2. Notched Charpy Impact Strength ISO 179/1eA kJ/m -30 C (-22 F) 23 C (73 F) 10. 2. Unnotched Charpy Impact Strength ISO 179/1eU kJ/m -30 C (-22 F) 40. 23 C (73 F) 40. Thermal Deflection Temperature ISO 75f C ( F).

9 243 (469). 225 (437). Melting Temperature ISO 11357-1/-3 C ( F). 10 C/min 252 (486). CLTE, Normal ISO 11359-1/-2 E-4/C (E-4/F). -40 - 23 C (-40 - 73 F) ( ). 23 - 55 C (73 - 130 F) ( ). 55 - 160 C (130 - 320 F) ( ). Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at , ISO Electrical properties measured at , and all ASTM properties measured at Test temperatures are 23 C unless otherwise stated. Shrinkage generated per ISO 294-4 based on 60 X 60mm end-gated plagues or ASTM D 955 based on 76 X 127mm (3 X 5in) end-gated plaques. The DuPont Oval Logo, DuPont , The miracles of science and Rynite are trademarks or registered trademarks of DuPont Company.

10 Copyright 2006. 060202/060203. The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated;. these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes.


Related search queries