DVMEGAファームウェアの書き換え方法（ラズパイ使用）

dvmega JR1 OFP 2016 4 24 dvmega dvmega Firmware (1) dvmega (Single Band dvmega ) (Dual Band dvmega ) (2) SD Firm wear PC PC Firmware Firmware : (1) dvmega (Raspberry Pi 2 ) (2) ircddbgateway DstarRepeater GPIO (3) Teminal >sudo apt-get update >sudo apt-get install git avrdude python-dev >git clone >cd avrdude-rpi >sudo cp autoreset /usr/bin >sudo cp avrdude-autoreset /usr/bin >sudo mv /usr/bin/avrdude /usr/bin/avrdude-original >sudo ln -s /usr/bin/avrdude-autoreset /usr/bin/avrdude (1) Teminal >cd avrdude-rpi --- >avrdude -p m328p -c arduino -p /dev/ttyAMA0 -b 1152000 -F -U / Firmw

2．前準備 (1) DVMEGA にジャンパー線をバンダ付けする。 (Single Band DVMEGA) (Dual Band DVMEGA) (2) ラズパイSDカードに新しいFirm wearをコピーしておく。 PCにSDカードアダプターを接続し、PCからアクセスできる所に新Firmwareファイルをコピーしておく。（新Firmwareの例）:

Tags:

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of DVMEGAファームウェアの書き換え方法（ラズパイ使用）

1 dvmega JR1 OFP 2016 4 24 dvmega dvmega Firmware (1) dvmega (Single Band dvmega ) (Dual Band dvmega ) (2) SD Firm wear PC PC Firmware Firmware : (1) dvmega (Raspberry Pi 2 ) (2) ircddbgateway DstarRepeater GPIO (3) Teminal >sudo apt-get update >sudo apt-get install git avrdude python-dev >git clone >cd avrdude-rpi >sudo cp autoreset /usr/bin >sudo cp avrdude-autoreset /usr/bin >sudo mv /usr/bin/avrdude /usr/bin/avrdude-original >sudo ln -s /usr/bin/avrdude-autoreset /usr/bin/avrdude (1)

2 Teminal >cd avrdude-rpi --- >avrdude -p m328p -c arduino -p /dev/ttyAMA0 -b 1152000 -F -U / Firmware 30 (1) Raspberry Pi OS Raspbian wheezy OK Raspbian jessie NG

Related search queries