Transcription of Eco Prim T - Mapei
1 T. rim o P. Ec EMICODE . GEV. Solvent free acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC). WHERE TO USE emission of volatile organic compounds (EMICODE. All-purpose primer for interiors to improve adhesion EC1), so it is absolutely harmless to the health of the of levelling compounds on all absorbent and non- installer and the end-user. It can be stored with no absorbent surfaces. particular precautions. Some application examples RECOMMENDATIONS. T. o prepare very compact and smooth cementitious Apply eco prim t only on internal flooring. renders and concrete floors before the application of Mapei levelling products (see products for substrate Apply eco prim t only on moisture-stable wood. preparation). Do not apply eco prim t on substrates subject to T. o prepare surfaces with traces of glue or old existing rising damp. smoothing compounds before smoothing or applying cementitious adhesives.
2 APPLICATION PROCEDURE. Preparing the substrate P. reparation of surfaces in gypsum, anhydrite, wood, Substrates must be uniformly dry, sound, free of marine plywood chipboard, ceramic or natural stone dust, loose particles, cracks, paint, wax, oil, rust, before smoothing or applying cementitious adhesives. traces of gypsum or other products that can interfere with bonding. B. onding aid for cementitous smoothing compounds on substrates consolidated or waterproofed with The regulations of each country must be strictly Mapeproof ESM, Mapeproof One Coat or followed. Mapeproof 1K Turbo. It is essential to make sure there is no rising damp TECHNICAL CHARACTERISTICS present. eco prim t is a solvent-free, easily applied acrylic resins-based primer in water dispersion. Unbonded screeds laid onto light-weight concrete or It has excellent bonding, flexibility, water and ageing thermal-acoustic insulating layer and screeds over resistant characteristics.
3 Bare ground must be provided with a vapour barrier to prevent rising damp. eco prim t is an easily applied, ready to use white coloured liquid. It is applied by brush or roller. APPLYING THE PRIMER. eco prim t can be applied with a brush or roller. It eco prim t is not flammable and shows a very low is usually diluted 1 to 2 with water when applying on [Resilienti] 2908_eco prim t_uk ( - 3 Bozza/Ciano/PDF). T. Prim o TECHNICAL DATA (typical values). Ec PRODUCT IDENTITY. Consistency: fluid liquid Colour: white Density (g/cm ): pH: Dry solids content (%): 43. Brookfield viscosity (mPa s): 1,200. (# 2 - 20 rpm). EMICODE: EC1 - very low emission APPLICATION DATA (at +23 C - 50% ). Application temperature range: from +5 C to +35 C. Drying time: concrete-wood: 15-20 mins. ceramic: 30-40 mins. Waiting time before applying the adhesive or the smoothing compound over: concrete-wood: 2-3 hrs.
4 Ceramic: 4-5 hrs. FINAL PERFORMANCE DATA. Resistance to moisture: excellent Resistance to ageing: excellent Resistance to solvents and oils: fair Resistance to acids and alkali: fair Resistance to temperature: excellent cementitious or anhydrite surfaces. It is used SAFETY INSTRUCTIONS FOR. undiluted on existing ceramic tile, natural PREPARATION AND APPLICATION. stone, wood and adhesive residues (as long eco prim t is not hazardous according to the as they are water resistant). regulations on the classification of mixtures. It is recommended to take the usual precautions for handling chemical products. When the adhesive is completely dry For further and complete information about it is possible to apply a smoothing the safe use of our product please refer to compound or mortar. Drying time varies our latest version of the Material Safety with the absorbency of the substrate and Data Sheet.
5 Environmental conditions (temperature and humidity) approximately between 2 and PRODUCT FOR PROFESSIONAL USE. 5 hours. Whilst we try to ensure that any advice, However, it is recommended not to wait recommendations or information given in our more than 24 hours. literature is accurate and correct, we have no control over the circumstances in which If the product is used as a bonding aid our product is used. It is therefore important for cementitious smoothing compounds that the end users satisfy themselves that the on substrates treated with an epoxy or product and conditions are suitable for the envisaged application. polyurethane membrane, such as No warranty can be given or responsibility Mapeproof ESM, Mapeproof One Coat or accepted other than, that the product Mapeproof 1K Turbo, eco prim t must be supplied by us will meet our written applied neat at least 24 hours after and no specification.
6 More than 7 days after applying one of the End users should ensure that our latest above membranes. product data and safety information sheets have been consulted prior to use. Cleaning Please refer to the current version of the While still wet, eco prim t can be cleaned Technical Data Sheet, available from our from floors or wall coverings, tools, hands website and clothing with water. When dry, use This symbol is used to identify Mapei products alcohol or Pulicol 2000. which give off a low level of volatile organic compounds (VOC) as certified by GEV (Gemein- schaft Emissionskontrollierte Verlegewerkstoffe, CONSUMPTION Klebstoffe und Bauprodukte ), an international organisation for controlling the level of emissions Consumption varies from to kg/m , from products used for floors. depending on the porosity of the substrate Our Commitment To The Environment and on how it is applied.
7 Mapei products assist Project Designers and Contractors create innovative LEED. (The Leadership in Energy and Environmental PACKAGING Design) certified projects, in compliance with the Green eco prim t is available in 20 and 5 kg drums. Building Council. STORAGE All relevant references Under normal conditions eco prim t is for the product are available stable for at least 12 months in its original upon request and from sealed packaging. Avoid prolonged exposure to frost. Ec o Prim T. BUILDING THE FUTURE.. Any reproduction of texts, photos and illustrations published 2908-3-2013 here is prohibited and subject to prosecution ( ) BETA.