ECOLOFLEX SPC 400 HyB - NIPPON PAINT MARINE

1 Suitable UseCoastal vessels (Medium to high speed)TypeCopper silyl acrylate copolymer(Tin-free / Self-smoothing / Hydrolysis / High solid)ColorCherry V Plum VGlossSemi-glossVolume Solids 52 2% (ISO3233:1998)Typical Dry Film Thickness80 ~ 150 mApprox. Wet Film Thickness 154 ~ 288 mTheoretical Coverage m / L (100 m) Drying Time Surface Dry1hour(5 C)40minutes(20 C)30minutes(30 C)Dry Hard3hours(5 C)1hour(20 C)40minutes(30 C)Interval before Overcoating (5 C)4hours(20 C)3hours(30 C)( by self ) Max.(5 C)(20 C)(30 C)Interval before Immersion (5 C)12hours(20 C)10hours(30 C) See Note (4).Thinner NIPPON MARINE THINNER 300 ( 0 ~ 5%, by weight )Application Method Airless Spray Tip range ~ mm Fan angle 60 ~ 75 Output pressure above 150 kg / cm Brush / Roller For touching up small areas onlyTypical Package16 LPackage may vary from country to Local BrandECOLOFLEX SPC 400 HyBFlash Point24 CSurface Preparation Reference No.

2 : 12 - 17 ECOLOFLEX SPC 400 HyBPatented copolymer technology (Copper silyl acrylate copolymer) which ensures long term andstable self-smoothing effect which makes the fresh active coating surface constantly exposed toseawater, resulting in excellent antifouling is specially designed for coastal Date: July 2015 (ES) All surfaces to be coated should be clean, dry and free pressure fresh water wash and remove all oil / grease,soluble contaminants and other foreign 1/2 Safety Note 1)2)3)4)Interval before immersion is related to ambient conditions, ventilation, film thickness, andnumber of coats and will be affected correspondingly.

3 Contact us for actual )Store the paints in PAINT SPC 400 HyBThe declaration letter of Tin-free Antifouling PAINT would not be issued if mixed with the otherantifouling paints product or another chemical Date: July 2015 (ES)The information contained in this sheet is liable to modification from time to time in the light ofexperience and our policy of continuous product NIPPON MARINE THINNER 300 to wash painting appliances, hoses and guns before and precautions to avoid skin and eye contact ( gloves,goggles, face masks, barrier creams etc.)Proper ventilation and protective measures must be providedduring applications and drying period to keep solvent vaporconcentrations within safe to use, obtain, consult and follow the SDS for thisproduct concerning health and safety 2/2