Transcription of EFFECTIVE: DIMENSION PRINT PRINT: 13-MAY-14 …
1 EFFECTIVE: SUPERSEDES: PRINT :SHEET:02-MAR- 1113-MAY-1407-20431 OF 1 DIMENSION PRINTTEFC/EXPLOSION PROOFFRAME: 5800 BASIC TYPE: E, JAPPROVED BYR. KINGR. SCHMIDTN idec Motor CorporationSt. Louis, MissouriINFORMATION DISCLOSED ON THIS DOCUMENTIS CONSIDERED PROPRIETARY AND SHALL NOT BEREPRODUCED OR DISCLOSED WITHOUT WRITTENCONSENT OF NIDEC MOTOR CORPORATIONIHP_DP_NMCA (MAR-2011) SOLIDEDGEMOOTRS07-2043 OFPOLES24 ANDMOREAA2 1/2 NPT3 NPT4 NPTDM3/4 NPT1 NPT1 1/2 NPT1. ALL ROUGH DIMENSIONS MAY VARY BY .25" DUE TO CASTING AND/OR FABRICATION A MINIMUM CLEARANCE OF .25" BETWEEN FACE OF MOTOR AND COUPLING GUARD IS REQUIRED TO PERMIT AIR STANDARD ASSEMBLY POSITION F-1 IS SHOWN. F-2 IS PROVIDED WHEN SPECIFIED. CONDUIT OPENINGS MAY BE LOCATED IN STEPS OF 90 DEGREES REGARDLESS OF LOCATION.
2 STANDARD AS SHOWN WITH CONDUIT OPENING "SS" SHAFT EXTENSION IS AVAILABLE ONLY ON 2-POLE RATINGS. "S" AND "ML" SHAFT EXTENSIONS ARE NOT AVAILABLE ON 2-POLE QTY-8 HOLES ON 5807 AND QTY-6 ON ALL 1/4 NPT3 1/2 NPTJQTY. DIMENSIONS ARE IN SIZECONDUITH DIAHOLESDM SIZE CONDUITCONDUIT BOX FORACCESSORY LEADSAS +..03 .03 2F
