Example: stock market

Effects of Pipe stiffness and installation methods …

Sixth International Water Technology Conference, IWTC 2001, Alexandria, Egypt 143 Effects of pipe stiffness and installation methods on performance Of GRP pipes Based on the latest AWWA M- 45 design methods and critical evaluation of past performance of GRP pipes in Egypt Eng. Saad ElKhadem ( Ms. ) Managing Director Future pipe Industries 6th of October City, Egypt Introduction GRP pipes are one of the principal pipe materials used in water and sanitary sewerage projects in both gravity and pressure applications. These pipes are inherently corrosion resistant both internally and externally as compared to conventional metallic or concrete pipes.

Sixth International Water Technology Conference, IWTC 2001, Alexandria, Egypt 143 Effects of Pipe stiffness and installation methods on performance

Tags:

  Installation, Methods, Pipe, Stiffness, Pipe stiffness and installation methods, Pipe stiffness and installation methods on

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Effects of Pipe stiffness and installation methods …

1 Sixth International Water Technology Conference, IWTC 2001, Alexandria, Egypt 143 Effects of pipe stiffness and installation methods on performance Of GRP pipes Based on the latest AWWA M- 45 design methods and critical evaluation of past performance of GRP pipes in Egypt Eng. Saad ElKhadem ( Ms. ) Managing Director Future pipe Industries 6th of October City, Egypt Introduction GRP pipes are one of the principal pipe materials used in water and sanitary sewerage projects in both gravity and pressure applications. These pipes are inherently corrosion resistant both internally and externally as compared to conventional metallic or concrete pipes.

2 Controlling pipe deflection within safe limits (usually 5 % long term) is an important factor to insure that the long service life associated with GRP pipes will be realized. In an attempt to solve many of the problems encountered with these pipes in the past, several agencies have attempted to solve these problems by specifying high stiffness pipe , in spite of the fact that most of these problems are unrelated to the pipe stiffness . The paper presents an engineering perspective to the cause of these problems and provides solutions and recommendations to preventing these past problems from recurring in current and future projects.

3 The paper also presents a brief summary of the latest design procedures for GRP pipes contained in AWWA M45 Design manual, which incorporates major updates to the design procedures, which take into account native and backfill soil properties, and trench dimensions in calculating pipe deflection. Over 170 cases were analyzed using the new procedures to pipe stiffnesses varying from 2500 to 10,000 N/m2 and the safe limit for using these pipes in various soil conditions and depths was obtained.

4 The paper presents the summary of these calculations, which allows the Engineer to evaluate the safe limits and appropriate stiffness classes for each project. The Effects of live loads at shallow depths are also presented. The modified Spangler equation is considered the universally accepted equation used to predict deflection of flexible pipes subject to external loads. The Equation is used Sixth International Water Technology Conference, IWTC 2001, Alexandria, Egypt 144 by most international standards such as ASTM and AWWA in the design of flexible pipe such as GRP, PVC and Steel pipes.

5 Deflection equation (based on the modified Spangler equation for flexible pipe ) D/D = kx* (WI + Df* Wc ) / 8 * SN + * E *100 WI = Live (Traffic) Load N/m2 Wc = Soil Load on pipe N/m2 D/D = Deflection - % SN = stiffness - N/m2 = EI/D3 E = backfill modulus - N/m2 Df = deflection lag factor - accounts for Creep and soil consolidation Kx = bedding coefficient, function of trench bedding shape = or depending on shape of bed D = Average pipe diameter - m This equation assumes that the trench width is sufficiently wide that the pipe does not feel the Effects of the native soil and that the backfill material type and compaction (E )

6 Reflect the actual installation in a realistic way. Many end users felt the equation should factor-in the trench width and the native soil properties in a clear way to insure that calculations presented reflect actual conditions on-site. As such the American Water Works Association revised the deflection equation in the 1996 edition of the Design manual for Fiberglass pipe M-45 . Revised equation - 1996 M 45 American Water Works Association Modified Deflection equation D/D= kx* (WI + Df * Wc ) / ( 8 *SN + * E b * Sc )*100 WI = Live (Traffic) Load N/m2 Wc = Soil Load on pipe N/m2 D/D = long term deflection - % (usually 5 % maximum)

7 SN = stiffness - N/m2 = EI/D3 E b = backfill modulus - N/m2 Df = deflection lag factor - accounts for Creep and soil consolidation Sc = soil support combining factor Kx = bedding coefficient, function of trench bedding shape = or depending on shape of bed D = Average pipe diameter - m The soil support factor Sc is a new factor introduced that is a function of the ratio of the trench width (Bd) to the pipe nominal diameter (ND) and the ratio of the native soil modulus (E n) to the backfill material modulus (E b).

8 Sixth International Water Technology Conference, IWTC 2001, Alexandria, Egypt 145 AWWA Table 5-4: Soil Support Combining Factor (Sc) E'n/E'b (Bd / ND ) Value 2 3 4 5 For values between the table values use straight-line interpolation from adjacent values in the table. E'n = Native soil modulus of the trench wall E'b = Backfill soil modulus Bd = Trench width at spring line ND = Nominal pipe diameter Sc = Soil support combining factor AWWA Table 5-6 Native Soil Classification Soil Type E n MPa qu Unconfined Compressive.

9 Strength Blow Count SPT Soil Group Granular Cohesive 192-384 KPa 15-30 1 Compact Very stiff 96-192 KPa 8-15 2 Slightly Compact Stiff 8-96 KPa 4-8 3 Loose Medium 24-48 KPa 2-4 4 Very Loose Soft KPa 12-24 1-2 5 Very Loose Very Soft It has been a common misconception that pipe stiffness is related to pressure. This is not true. pipe stiffness is simply a measure of the pipe s ability to resist external loads at a given deflection (usually 3-5 %), and is no way related to the pipe s working pressure. It is therefore possible to produce a 16 bar working pressure pipe with a stiffness of 1250 N/m2 and it is also possible to produce a Gravity pipe with a stiffness of 10,000 N/m2.

10 Yet some agencies in Egypt have been recently specifying GRP gravity pipes to have a minimum stiffness of 5,000 N/m2 (for all depths) and pressure pipes (force mains Sixth International Water Technology Conference, IWTC 2001, Alexandria, Egypt 146 and water lines) to have a minimum stiffness of 10,000 N/m2. This policy needs to be re-examined and the specification for GRP pipes must be revised to reflect actual loadings on the pipe based on a proper and sound engineering basis. The use of higher stiffness pipe should be limited to high external loads applications such as those that are present in deep gravity sewer lines.


Related search queries