Engineered Products Catalog - Crane Pumps

1 Engineered Products Catalog For most current information, please see our online Catalog at Barnes 2008 Printed in A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. This page intentionally left blank SECTION INTRO. PAGE B. DATE. A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. Introduction Registered Trademarks Barnes is registered trademark of Crane Pumps & Systems, Inc. UL is a registered trademark of Underwriters Laboratories Inc.

2 CSA is a registered trademark of Canadian Standards Association. Other brand and product names are trademarks or registered trademarks of their respective holders. NOTICE: Performance and dimensional data presented in this Catalog are for planning purposes only and are subject to change without notice. Consult your authorized Barnes distributor for speci c details and the latest information, or call Crane Pumps & Systems, Inc. direct at (937) 778-8947. SECTION INTRO. PAGE 1. DATE 12/06. A Crane Co.

3 Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. About the Catalog Introduction The Catalog is organized in 6 Major Sections and a number of Section : Solids Handling Submersible Pumps ;. Sub-Sections, along with the General, and Warranty & Service Family Curves & Sample Speci cations sections. Sect. : 3" Solids Handling Pumps Sect. : 3" Solids Handling Pumps Explosion Proof Section contains Solids Handling Submersible Pumps Sect. : 4" Solids Handling Pumps Section contains Submersible Chopper Pumps Sect.

4 : 4" Solids Handling Pumps Explosion Proof Section 1 contains Submersible Wastewater and Sump Sect. : 6" Solids Handling Pumps Pumps Sect. : 6" Solids Handling Pumps Explosion Proof Section 3 contains Submersible Ef uent and Grinder Sect. : 8" Solids Handling Pumps Pumps Sect. : 8" Solids Handling Pumps Explosion Proof Submersible Accessories, Sect. : 10" Solids Handling Pumps Sect. : 10" Solids Handling Pumps Explosion Proof Section 4 contains Self-Priming Pumps Section 5 contains Other Pumps (Fountain Pumps and Section : Submersible Chopper Pumps .)

5 End Suction Centrifugal Pumps ) Family Curves & Sample Speci cations Section 6 contains Self-Priming Accessories Sect. : 4" Submersible Chopper Pumps Sect. : 4" Submersible Chopper Pumps Explosion Proof Each Major Section is labeled with the type of pump, Sect. : 6" Submersible Chopper Pumps Submersible Non-Clog Pumps , Ef uent/Grinder Pumps , Sect. : 6" Submersible Chopper Pumps Explosion Proof etc., which contains a Family Curve, by discharge size. By laying your pumping requirements within this curve, you can Section 1: Submersible Non-Clog Pumps .

6 Come up with the discharge size of the pump. Now turn to the Family Curves & Sample Speci cations corresponding Sub-Section which is detailed by discharge Sect. 1A: Sump & Utility Pumps size for pump data, dimensions and performance. One Sub- Sect. 1B: 1-1/2 , 2 & 3 Vertical Discharge Non-Clog Section, usually the last, will have typical Installation drawings Sect. 1D: 4 Horizontal Discharge and/or Package Systems. Sect. 1L: Non-Clog Installation Drawings Sect. 1M: Non-Clog Explosion Proof; Installation Drawings Also within the Major Section will be sample Speci cations for each type of pump construction.

7 These will help you in Section 3: Submersible Ef uent and Grinder Pumps ;. preparing your Project Speci cations using Barnes Pumps . Family Curves & Sample Speci cations Sect. 3A: Ef uent Pumps Sect. 3B: Grinder Pumps Sect. 3C: Grinder Pumps Explosion Proof Sect. 3E: Package Systems and Installation Drawings Submersible Accessories: Sect. A: Panels & Accessories Sect. B: Break Away Fittings and Accessories Sect. C: Basins & Accessories Section 4: Self-Priming Pumps ;. Family Curves & Sample Speci cations Sect.

8 4A: 2 thru 10 Solids Handling Motor-Driven Sect. 4E: 1-1/2 thru 6 Universal Drive Pumps Section 5: Other Pumps ;. Sect. 5A: Fountain Pumps Sect. 5B: End Suction Pumps Section 6: Self-Priming Accessories SECTION INTRO. PAGE 2. DATE 1/18. A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. Model Nomenclature Chart For Submersible Pumps Introduction THE FOLLOWING MODEL NOMENCLATURE IS USED IN SECTIONS 1 THRU 3 INCLUDING SUB-SECTIONS. MOTOR, PHASE & VOLTAGE: 0=200 Volt ,1 Phase,60 Hz.

9 1=115 Volt ,1 Phase,60 Hz. 2=230 Volt ,1 Phase,60 Hz. 3=230 Volt ,3 Phase,60 Hz. 4=460 Volt ,3 Phase,60 Hz. 5=575 Volt ,3 Phase,60 Hz. 6=200 Volt ,3 Phase,60 Hz. 7=200/230 Volt ,1 Phase,60 Hz. 8=230/460 Volt, 3 Phase,60 Hz. DISCHARGE SIZE: 9=200/230 Volt, 3 Phase,60 Hz. * = " Discharge NAMEPLATE HORSEPOWER: N = 208-230/460 Volt, 3 Phase, 60 Hz. * = " Discharge 9 = T=380 Volt, 3 Phase, 60Hz. 2 = 2" Discharge 19 = V=415 Volt, 3 Phase, 50 Hz. 3 = 3" Discharge 37 = W=110 Volt, 1 Phase, 50 Hz. 4 = 4" Discharge 50 = 5HP X=220 Volt, 1 Phase, 50 Hz.

10 6 = 6" Discharge 113 = Y=220 Volt, 3 Phase, 50 Hz. 8 = 8" Discharge 2000 = 200HP Z=380 Volt, 3 Phase, 50 Hz 3 SE 30 3 2 L. SERIES PUMP: SPEED: DESIGN CODE: BP = Sump/Ef uent 60Hz (50Hz) A = Air Filled (3" to 8" Pumps only). E = Ef uent 2=3450 RPM (2850) A = Automatic (2" and lower). EH = Ef uent 4=1750 RPM (1425) AU = Automatic EHV = Ef uent-Vortex 6=1150 RPM (950) AUE = Automatic (ESPS level control). HCU = Horizontal Centrifugal Universal Drive 8=870 RPM (720) AUF = Automatic (Swing type level control).