Engineered Products Catalog - Crane Pumps

1 Engineered Products Catalog For most current information, please see our online Catalog at Barnes 2008 Printed in A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. This page intentionally left blank SECTION INTRO. PAGE B. DATE. A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. Introduction Registered Trademarks Barnes is registered trademark of Crane Pumps & Systems, Inc. UL is a registered trademark of Underwriters Laboratories Inc. CSA is a registered trademark of Canadian Standards Association. Other brand and product names are trademarks or registered trademarks of their respective holders. NOTICE: Performance and dimensional data presented in this Catalog are for planning purposes only and are subject to change without notice. Consult your authorized Barnes distributor for speci c details and the latest information, or call Crane Pumps & Systems, Inc.

2 Direct at (937) 778-8947. SECTION INTRO. PAGE 1. DATE 12/06. A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. About the Catalog Introduction The Catalog is organized in 6 Major Sections and a number of Section : Solids Handling Submersible Pumps ;. Sub-Sections, along with the General, and Warranty & Service Family Curves & Sample Speci cations sections. Sect. : 3" Solids Handling Pumps Sect. : 3" Solids Handling Pumps Explosion Proof Section contains Solids Handling Submersible Pumps Sect. : 4" Solids Handling Pumps Section contains Submersible Chopper Pumps Sect. : 4" Solids Handling Pumps Explosion Proof Section 1 contains Submersible Wastewater and Sump Sect. : 6" Solids Handling Pumps Pumps Sect. : 6" Solids Handling Pumps Explosion Proof Section 3 contains Submersible Ef uent and Grinder Sect. : 8" Solids Handling Pumps Pumps Sect. : 8" Solids Handling Pumps Explosion Proof Submersible Accessories, Sect.

3 : 10" Solids Handling Pumps Sect. : 10" Solids Handling Pumps Explosion Proof Section 4 contains Self-Priming Pumps Section 5 contains Other Pumps (Fountain Pumps and Section : Submersible Chopper Pumps ;. End Suction Centrifugal Pumps ) Family Curves & Sample Speci cations Section 6 contains Self-Priming Accessories Sect. : 4" Submersible Chopper Pumps Sect. : 4" Submersible Chopper Pumps Explosion Proof Each Major Section is labeled with the type of pump, Sect. : 6" Submersible Chopper Pumps Submersible Non-Clog Pumps , Ef uent/Grinder Pumps , Sect. : 6" Submersible Chopper Pumps Explosion Proof etc., which contains a Family Curve, by discharge size. By laying your pumping requirements within this curve, you can Section 1: Submersible Non-Clog Pumps ;. come up with the discharge size of the pump. Now turn to the Family Curves & Sample Speci cations corresponding Sub-Section which is detailed by discharge Sect.

4 1A: Sump & Utility Pumps size for pump data, dimensions and performance. One Sub- Sect. 1B: 1-1/2 , 2 & 3 Vertical Discharge Non-Clog Section, usually the last, will have typical Installation drawings Sect. 1D: 4 Horizontal Discharge and/or Package Systems. Sect. 1L: Non-Clog Installation Drawings Sect. 1M: Non-Clog Explosion Proof; Installation Drawings Also within the Major Section will be sample Speci cations for each type of pump construction. These will help you in Section 3: Submersible Ef uent and Grinder Pumps ;. preparing your Project Speci cations using Barnes Pumps . Family Curves & Sample Speci cations Sect. 3A: Ef uent Pumps Sect. 3B: Grinder Pumps Sect. 3C: Grinder Pumps Explosion Proof Sect. 3E: Package Systems and Installation Drawings Submersible Accessories: Sect. A: Panels & Accessories Sect. B: Break Away Fittings and Accessories Sect. C: Basins & Accessories Section 4: Self-Priming Pumps .

5 Family Curves & Sample Speci cations Sect. 4A: 2 thru 10 Solids Handling Motor-Driven Sect. 4E: 1-1/2 thru 6 Universal Drive Pumps Section 5: Other Pumps ;. Sect. 5A: Fountain Pumps Sect. 5B: End Suction Pumps Section 6: Self-Priming Accessories SECTION INTRO. PAGE 2. DATE 1/18. A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. Model Nomenclature Chart For Submersible Pumps Introduction THE FOLLOWING MODEL NOMENCLATURE IS USED IN SECTIONS 1 THRU 3 INCLUDING SUB-SECTIONS. MOTOR, PHASE & VOLTAGE: 0=200 Volt ,1 Phase,60 Hz. 1=115 Volt ,1 Phase,60 Hz. 2=230 Volt ,1 Phase,60 Hz. 3=230 Volt ,3 Phase,60 Hz. 4=460 Volt ,3 Phase,60 Hz. 5=575 Volt ,3 Phase,60 Hz. 6=200 Volt ,3 Phase,60 Hz. 7=200/230 Volt ,1 Phase,60 Hz. 8=230/460 Volt, 3 Phase,60 Hz. DISCHARGE SIZE: 9=200/230 Volt, 3 Phase,60 Hz. * = " Discharge NAMEPLATE HORSEPOWER: N = 208-230/460 Volt, 3 Phase, 60 Hz.

6 * = " Discharge 9 = T=380 Volt, 3 Phase, 60Hz. 2 = 2" Discharge 19 = V=415 Volt, 3 Phase, 50 Hz. 3 = 3" Discharge 37 = W=110 Volt, 1 Phase, 50 Hz. 4 = 4" Discharge 50 = 5HP X=220 Volt, 1 Phase, 50 Hz. 6 = 6" Discharge 113 = Y=220 Volt, 3 Phase, 50 Hz. 8 = 8" Discharge 2000 = 200HP Z=380 Volt, 3 Phase, 50 Hz 3 SE 30 3 2 L. SERIES PUMP: SPEED: DESIGN CODE: BP = Sump/Ef uent 60Hz (50Hz) A = Air Filled (3" to 8" Pumps only). E = Ef uent 2=3450 RPM (2850) A = Automatic (2" and lower). EH = Ef uent 4=1750 RPM (1425) AU = Automatic EHV = Ef uent-Vortex 6=1150 RPM (950) AUE = Automatic (ESPS level control). HCU = Horizontal Centrifugal Universal Drive 8=870 RPM (720) AUF = Automatic (Swing type level control). SC = SITHE Submersible Chopper DS = Double Seal Oil Filled SE = Sewage Ejector EA = Air Filled SF = Submersible Fountain EDS = Double Seal Oil Filled SFU = Submersible Fountain EHA = High Ef ciency Air Filled SEV = Sewage Ejector-Vortex EL = Oil Filled SGV = Vortex Submersible Grinder HA = High Ef ciency Air Filled SGVF = High Flow, Vortex Submersible Grinder HD = Heavy Duty SGVH = High Head, Vortex Submersible Grinder HF = High Flow SH = Solids Handling Pump HL = High Ef ciency Oil Filled SP = Sump/Ef uent HT=High Temperature STEP = Septic Tank Ef uent Pump L =Oil Filled SU = Sump & Utility M = ABS Retro t / Horizontal Discharge OGVF = High Flow, Vortex Submersible OMNIG rind S=Special OGVH = High Head, Vortex Submersible OMNIG rind SS=Single Seal Oil Filled OGP = Two Stage, High Head.

7 Vortex Submersible Grinder VF=Vertical level control UT = Utility X=Cord length variation XGV = BLADE Explosion Proof Submersible Grinder XSGV = Explosion Proof Vortex Submersible Grinder (*) Discharge designation is not used on these models. ( ) This model nomenclature does not apply to the following submersible Non-Clog Pumps : SE411, SE421, SE411HT, SE51, SE52, SE51HT, SE52HT & UT17. SECTION INTRO. PAGE 3. DATE 1/18. A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. Model Nomenclature Chart CROWN Sewage Pumps Introduction THE FOLLOWING MODEL NOMENCLATURE IS USED IN SECTIONS 4, 4A, AND 4C. CONNECTION SIZE: 1 = ". 2 = ". 3 = ". 4 = " HYDRAULIC GROUP: PUMP SERIES: 6 = " LA. PO = Universal Drive "Sewage 8 = " LB. Pumps " (Pump Only) 10 = " LC. PO 3 LA 8D 1050 LV. IMPELLER DIAMETER: First two digits indicate whole number diameter of impeller. The last digit indicates the fractional part of the impeller based on GENERAL ARRANGEMENT: the following: DRIVE: (BLANK) = No Driver FB = Flex Coupled-Base Mounted (RPM) = For Electric Motor OT = Over Top V-Belt A =.

8 062 VV = Vertical V-Belt B = .125 LV = Left Hand V-Belt C = .187 RV = Right Hand V-Belt D = .250 (BLANK) = Skid Mounted E = .312. F = .375. G = .437. H = .500. I = .562. J = .625. K = .687. L = .750. M = .812. N = .875. * = .937. X = Indicates No Fraction SECTION INTRO. PAGE 4. DATE 10/12. A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. Model Nomenclature Chart CROWN Self-Priming Pumps Introduction THE FOLLOWING MODEL NOMENCLATURE IS USED IN SECTIONS 4E, 4F AND 4G. HYDRAULIC GROUP: 4. 6. 9. PUMP SERIES: 12. B = Pedestal Mounted/Universal Drive 19. G = Engine Driven 21. CK = Bolt On Kits (NOTE: The "CK" Goes after 30. the Hydraulic Group.) * 40. 60. *. B 60 11H FB. or IMPELLER DIAMETER: TRAILER MOUNT TYPES: (B Series Only) (G Series Only) GENERAL ARRANGEMENT: First two digits indicate whole number (BLANK) = Skid Mounted, Engine (B Series Only). diameter of impeller.

9 The last digit indicates Driven FB = Flex Coupled-Base Mounted the fractional part of the impeller based on 1 = Contractor Trailer, Engine Driven OT = Over Top V-Belt the following: 2 = Highway Trailer, Engine Driven VV = Vertical V-Belt LV = Left Hand V-Belt A = .062 RV = Right Hand V-Belt B = .125. C = .187. D = .250. E = .312. F = .375. G = .437. H = .500. I = .562. J = .625. K = .687. L = .750. M = .812. N = .875. * = .937. (*) Bolt on kit Model Example: 9CK. X = Indicates No Fraction SECTION INTRO. PAGE 5. DATE 12/06. A Crane Co. Company USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598. Standard Terms and Conditions OUR ACCEPTANCE OF YOUR ORDER IS EXPRESSLY CONDITIONED ON THE GENERAL TERMS AND CONDITIONS. SET FORTH BELOW AND ALL TERMS STATED ON THE FACE OF THIS FORM. THE CONTRACT SHALL NOT. INCLUDE ANY DEVIATING OR ADDITIONAL TERMS UNLESS EXPRESSLY AGREED TO IN WRITING AND SIGNED.

10 BY AN OFFICER OF OUR COMPANY. PRICES: All prices are subject to change without notice and all shipments will be invoiced at the price in effect at the time of shipment, except when otherwise agreed to in writing by our authorized representative. Published prices are for Products of our standard design and construction and any item not covered by the most recent published price list must be referred to us for special pricing. Prices do not include freight. Weights shown in price lists are approximate shipping weights. The amount of any applicable present or future tax or other government charge upon the production, sale, shipment or use of goods ordered or sold is not in the price and will be added to billing unless you provide us with an appropriate exemption certi cate. QUOTATIONS: Prices quoted by us are valid for 30 days from date of quotation unless we have otherwise speci ed in writing. Clerical errors on quotations are subject to our correction and such errors will not be binding.