ENGINEERING PLASTIC PRODUCTS - Supply Services

1 Established 1980 New Zealand s most durable ENGINEERING plastics master distributorENGINEERING PLASTIC PRODUCTSSTANDARD plastics Colour:Orange or GreySpecs:PE-UHMW enhancedLong Term Service Temp:90 CRigid uPVC Excellent strength to weight ratio, chemical andflame resistance, make unplasticised PVC the material ofchoice for a wide range of applications. Colour:Grey, Black, Red, Blue, White, OrangeLong Term Service Temp:60 CLong Term Service Temp:ABS ABS offers a good balance of mechanical, chemical and electrical characteristics. Impact properties are also exceptionally good at room temperature. Colour:Gre y & IvorySpecs:TECARAN75 CAcrylic PMMA Acrylics are strong, stable, weather resistant and thermoformable.

2 Sheets are available in transparent, translucent, and opaque colours, as well as a variety of surface textures. Also known as Perspex .Colour:Clear & ColoursLong Term Service Temp: 80 CLong Term Service Temp: 80 CPolyurethane PU An elastomeric materi al of exceptional physical properties such as, toughness, flexibility and resistance to abrasion, temperature, puncture and tearing. Its hardness can vary from very soft to extremely hard. Polyurethane combines the toughness of metal with the elasticity of rubber. Polyurethane can be custom cast, enabling it to be cost eff ective for small to medium production runs.

3 Colour:Transparent & ColoursLong Term Service Temp:85 CPolyslick XLPolyslick XL is the superlative abrasion resistant grade of Ultra High Molecular Weight (UHMW) Polyethylene. XL grade is further enhanced with either silicone (XLS) for release and slip, or with glass (GXL) for unparalleled wear resistance. POLYSLICK XL grades are UV stabilised and have reduced thermal Virgin Colour:Natu ra l, Black & ColoursSpecs:PE-UHMW VirginLong Term Service Temp:90 CUltra High Molecular Weight Polyethylene is often referred to as the world s toughest polymer. PE-UHMW has high abrasion resistance, as well as excellent impact strength.

4 It is chemically resistant and has a low coefficient of friction which makes it highly effective in a variety of Repro Colour:BlackSpecs:PE-UHMW ReprocessedLong Term Service Temp:90 CReprocessed grade PE-UHMW utilises finely ground post production material to produce an economical substitute to using 100% virgin resin. Technical properties will be reduced from virgin material although hardness may be slightly increased. Generally the colour is black but it may show other coloured HMW (PE500)Colour:Natu ra l, Black & ColoursSpecs:PE-HMW VirginLong Term Service Temp:90 CCompared to PE-UHMW, PE-HMW has approximately 10% of the impact strength and only 25% of its abrasion resistance.

5 PE-HMW has a slightly better price point than PE-UHMW and may be used where impact and abrasion are not a primary HDPE (PE300) Colour:Natu ra l, Black & ColoursSpecs:PE-HD VirginLong Term Service Temp:90 CCompared to PE-UHMW, PE-HD has approximately 6% of the impact strength and only 25% of its abrasion resistance. PE-HD has the highest tensile strength of both PE-UHMW and PE-HMW and is the hardest material of the three. Typically, it is an extruded sheet product which can have a glossy or embossed :Natural, Black, White , BeigeSpecs:PP-C & PP-HLong Term Service Temp:PP-C 80 CLong Term Service Temp:PP-H 100 CDensetec Polypropylene Polypropylene offers a good balance of thermal, chemical and electrical properties with moderate strength.

6 Copolymers offer better impact resistance, while Homopolymers are stiffer and have higher operating temperatures. Abrasion resistance is poor. ENGINEERING plastics Extruded Nylon PA6E Good damping capacity, good impact strength and a high degree of toughness even at low temperatures. Good wear resistance, especially against rough frictio nal :Natu ra lSpecs:TECAMID 6 Long Term Service Temp:100 CExtruded Nylon PA66 EPA66E has good rigidity, hardness, abrasion resistance and thermal dimensional stability. It has better machinability thanPA6E and is particularly suitable for parts which are subjected to high mechanical and thermal :NaturalSpecs:TECAMID 66 Long Term Service Temp:100 CCast Nylon PA6C Compared to extruded PA6E, cast nylon has better physical properties such as higher tensile strength, maximum stiffness and hardness, better wear resistance, lower moisture absorption and better dimensional stabilit y.

7 It particularly suit s the production of large parts and thick wall secti :Natu ra l & ColoursSpecs:TECAST TLong Term Service Temp:100 CCast Nylon PA6C MoS2 Filled Similar to standard PA6C but with good UV resistance and improved slid ing properties. Higher surface hardness and good machinability . Colour:BlackSpecs:TECAST T MOLong Term Service Temp:100 CCast Nylon PA6C Oil Filled NYLON OIL is a lubricant modified cast PA6C which is particularly suitable for appli cations involving dry running. The uniform distribution of lubricant over the whole cross-section achieved with NYLON OIL guarantees a constant slid ing and wear behaviour throughout the whole service life.

8 Slidi ng wear rate, coefficient of slid ing fri ction and emergency running properties are vastly improved by compari son with standard PA6C. Colour:YellowSpecs:TECAST L YellowLong Term Service Temp:100 CAcetal POM-C Low moisture uptake, good fatigue strength and rig idity, easily machined, good dimensional stabil ity for parts with tight tolerances. Good sli ding characterist ics. Colour:White, Black & BlueSpecs:TECAFORM AHLong Term Service Temp:100 CAcetal PE Blend (POM-C + 10PE) Colour:BlueSpecs:TECAFORM AH LA BlueLong Term Service Temp:100 CPETGood wear properties in moist or dry surroundings, high dimensional stabil ity due to low thermal expansion, low moisture uptake, good dielectric properties, good chemical resistance.

9 Colour:WhiteSpecs:TECAPETLong Term Service Temp:110 CPET TF (PET + PTFE) Similar to standard PET but with a lower coefficient of friction and enhanced slidi ng and abrasion resistant properties. Colour:Light Gre ySpecs:TECAPET TFLong Term Service Temp:110 CPolycarbonate PC Polycarbonates are transparent and have exceptional high impact properties over a wide temperature range. It can be hot or cold :TransparentSpecs:TECANATLong Term Service Temp:120 CSimilar to Acetal POM-C but with added PE as a solid lubricant for improved sliding properties and abrasion PERFORMANCE plastics PTFE (Teflon )Highest chemical resistance with a continuous service temperature of 260 C.

10 Exceptional sli ding characteristics, as well as excellent electrical properties. Inherentl y flame retardant. Teflon is the registered trade mark of are avail able such as glass, carbon, bronze etc to improve certain : White Specs: TECAFLON Long Term Service Temp: 260 C PEEKE xcellent sli ding properties, very good mechanical properties, even under thermal load and has excellent resist ance to chemicals. The high continuous work ing tempera ture ro unds out the profile of this high performance PLASTIC and makes it a virtually universally useable design material for highly stressed parts.