Exelerate CIP Plus - chemstarworks.com

1 CHLORINATED - ALKALINE CLEANERE xelerate CIP PlusExelerate CIP plus is an optimized premium liquid, chlorinated cleaner with an enhanced water conditioning package that is formulated for circulation, spray and soak cleaning of processing equipment. This product is not for use as hard surface disinfectant or Quality Assurance yHelps enhance food safety when used in a total Ecolab product and professional services program. yChlorinated formula attacks and removes protein soils. yNon-corrosive to 304 and 316 stainless steel when used at the recommended concentrations. yPrevents hard water precipitates leaving stainless steel bright and Labor and Time yBuilt-in water conditioners, chelates, chlorine, and surfactants eliminate the need for installation and maintenance of additive pumps. ySaves time no mixing or dissolving required. yImproved rinsibility over traditional chlorinated detergents leads to shorter rinse times and less rinse Implications yReduces effluent impact: 1/2 the alkalinity and 1/3 less sodium than standard chlorinated Reduce cleaning Costs yFormulated with advanced polymers to help extend life of stainless steel equipment and elastomers.

2 YLower alkalinity compared to standard alkaline CIP cleaners reduces costs associated with pH neutralization in the waste water treatment. yBetter soil penetration from enhanced wetting agents. yLonger chlorine stability at higher storage temperatures (>100 F/38 C) than standard chlorinated alkalines. yBetter hard water tolerance (>22 grains) than standard chlorinated DESCRIPTIONBENEFITSPROPERTIESDIRECTIONS FOR USESTATEMENT OF ASSURANCEW orldwide Headquarters370 Wabasha Street N St. Paul, MN 1 800 392 3392 2015 Ecolab USA Inc. All rights reserved. 48283/0300/0415 CHLORINATED - ALKALINE CLEANERFor use only with 304 and 316 stainless steel processing circulation and spray cleaning , circulate solution using Exelerate CIP plus at mL/L (1 US fl oz /2 US gal) water at 60 - 71 C (140 - 160 F) for 20 minutes. Drain and rinse thoroughly with cold water. Follow with a sanitizing solution of Ecolab recommended foam cleaning , rinse equipment with warm water. Prepare foam solution using Exelerate CIP plus at - mL/L (2-4 US fl oz/US gal) water, and Ecolab recommended foam additive at a rate of mL/L (1 US fl oz/US gal) your Ecolab Representative for specific use instructions and recommended dispensing cautionary and first aid information, consult the Safety Data Sheet (SDS) or product product is effective under the intended conditions of use as outlined on the product label or specified in a Sanitation Standard Operating Procedure (SSOP).

3 This product will not adulterate food product provided that before using it, food products and packaging materials are removed from the room or carefully protected and after using these compounds, surfaces are thoroughly rinsed with potable Letter of Guaranty is available from your Ecolab .. liquidColor .. light yellowOdor .. chlorineFoam .. lowSpec. Grav. @ 20 C (68 F) .. per gallon .. ( kg)100% solution pH .. ChlorineAlkalinity: Active as Na2O .. ingredients contain no CIP PlusRegional OfficeDistributed by Ecolab Tomken Road Mississauga, ONL4W 2X5 Canada