Example: stock market

F Mounting the Rack PDU in a third-party enclosure G ...

Customer support and warranty information is available at the APC Web site, 2009 American Power Conversion. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective Power Distribution UnitInstallation InstructionsInstallation and ConfigurationD Mounting the Rack PDU in a vertical 0 U accessory channel of a NetShelter SX enclosureIn one vertical 0 U accessory channel, you can mount two full-length Rack PDUs or four half-length Rack Mounting the Rack PDU on the vertical rails of a standard EIA-310 enclosureSecure brackets to the back of the rear vertical rails using hardware included with your enclosure .

R] ( ] ( ] ( ). apc. ® ), ( ). ( ( apc.. ...

Tags:

  Mounting

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of F Mounting the Rack PDU in a third-party enclosure G ...

1 Customer support and warranty information is available at the APC Web site, 2009 American Power Conversion. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective Power Distribution UnitInstallation InstructionsInstallation and ConfigurationD Mounting the Rack PDU in a vertical 0 U accessory channel of a NetShelter SX enclosureIn one vertical 0 U accessory channel, you can mount two full-length Rack PDUs or four half-length Rack Mounting the Rack PDU on the vertical rails of a standard EIA-310 enclosureSecure brackets to the back of the rear vertical rails using hardware included with your enclosure .

2 Required U-space for brackets: Full-length Rack PDU: 36 U Half-length Rack PDU: 15 UF Mounting the Rack PDU in a third-party enclosureWarning: To avoid possible electrical shock and equipment damage, use only the supplied spacing: Full-length Rack PDU: 1500 mm ( in) Half-length Rack PDU: 575 mm ( in)G Configuring network settings and accessing the Rack PDUThe Rack PDU is DHCP compatible. Connect the network cable to the network port ( ) and then apply power to the unit. When the status LED ( ) for the network connection is solid green, perform the following to display the IP your network does not use a DHCP server, see the user s guide for your Rack PDU for details on other methods for configuring the TCP/IP Press the SCROLL button ( ) to display the Press the SCROLL button ( ) until Software Info is Press the SELECT button ( ).

3 The IP address To access the Rack PDU software interface, enter the IP address in your web browser address field. You will be prompted for a user name and password; enter the default apc for ResourcesThe Rack PDU User s Guide contains complete operation and configuration information. The user s guide plus additional documentation and downloadable software and firmware is available on the applicable product page on the APC Web site, To quickly find a product page, enter the product name or part number in the Search Factory WarrantyThis warranty applies only to the products you purchase for your use in accordance with this of warrantyAPC warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase.

4 APC will repair or replace defective products covered by this warranty. This warranty does not apply to equipment that has been damaged by accident, negligence or misapplication or has been altered or modified in any way. Repair or replacement of a defective product or part thereof does not extend the original warranty period. Any parts furnished under this warranty may be new or warranty This warranty extends only to the original purchaser who must have properly registered the product. The product may be registered at the APC Web site, ExclusionsAPC shall not be liable under the warranty if its testing and examination disclose that the alleged defect in the product does not exist or was caused by end user s or any third person s misuse, negligence, improper installation or testing.

5 Further, APC shall not be liable under the warranty for unauthorized attempts to repair or modify wrong or inadequate electrical voltage or connection, inappropriate on-site operation conditions, corrosive atmosphere, repair, installation, exposure to the elements, Acts of God, fire, theft, or installation contrary to APC recommendations or specifications or in any event if the APC serial number has been altered, defaced, or removed, or any other cause beyond the range of the intended ARE NO WARRANTIES, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, OF PRODUCTS SOLD, SERVICED OR FURNISHED UNDER THIS AGREEMENT OR IN CONNECTION HEREWITH.

6 APC DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTION AND FITNESS FOR A PARTICULAR PURPOSE. APC EXPRESS WARRANTIES WILL NOT BE ENLARGED, DIMINISHED, OR AFFECTED BY AND NO OBLIGATION OR LIABILITY WILL ARISE OUT OF, APC RENDERING OF TECHNICAL OR OTHER ADVICE OR SERVICE IN CONNECTION WITH THE PRODUCTS. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES. THE WARRANTIES SET FORTH ABOVE CONSTITUTE APC S SOLE LIABILITY AND PURCHASER S EXCLUSIVE REMEDY FOR ANY BREACH OF SUCH WARRANTIES. APC WARRANTIES EXTEND ONLY TO PURCHASER AND ARE NOT EXTENDED TO ANY THIRD PARTIES.

7 IN NO EVENT SHALL APC, ITS OFFICERS, DIRECTORS, AFFILIATES OR EMPLOYEES BE LIABLE FOR ANY FORM OF INDIRECT, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, ARISING OUT OF THE USE, SERVICE OR INSTALLATION, OF THE PRODUCTS, WHETHER SUCH DAMAGES ARISE IN CONTRACT OR TORT, IRRESPECTIVE OF FAULT, NEGLIGENCE OR STRICT LIABILITY OR WHETHER APC HAS BEEN ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES. SPECIFICALLY, APC IS NOT LIABLE FOR ANY COSTS, SUCH AS LOST PROFITS OR REVENUE, LOSS OF EQUIPMENT, LOSS OF USE OF EQUIPMENT, LOSS OF SOFTWARE, LOSS OF DATA, COSTS OF SUBSTITUENTS, CLAIMS BY THIRD PARTIES, OR SALESMAN, EMPLOYEE OR AGENT OF APC IS AUTHORIZED TO ADD TO OR VARY THE TERMS OF THIS WARRANTY.

8 WARRANTY TERMS MAY BE MODIFIED, IF AT ALL, ONLY IN WRITING SIGNED BY AN APC OFFICER AND LEGAL DEPARTMENT. Warranty claims Customers with warranty claims issues may access the APC customer support network through the Support page of the APC Web site, Select your country from the country selection pull-down menu at the top of the Web page. Select the Support tab to obtain contact information for customer support in your region. Installation und KonfigurationD Einbau der Rack PDU in einen vertikalen 0-HE-Zubeh rkanal eines NetShelter SX-Geh usesSie k nnen in einen vertikalen 0-HE-Zubeh rkanal zwei Rack PDUs mit voller L nge oder vier Rack PDUs mit halber l nge Einbau der Rack PDU unter Verwendung der vertikalen Schienen eines EIA-310-Standardgeh usesBefestigen Sie die Montagehalterungen anhand der mit dem Geh use mitgelieferten Befestigungsteile an der R ckseite der hinteren vertikalen Schienen.

9 Erforderliche H heneinheiten f r Montagehalterungen: Rack PDU mit voller L nge: 36 HE Rack PDU mit halber L nge: 15 HEF Einbau der Rack PDU in Geh use anderer AnbieterWarnung: Zur Vermeidung von Stromschl gen und Sch den an technischen Ger ten d rfen nur die mitgelieferten Befestigungsteile verwendet nde der Montagehalterungen: Rack PDU mit voller L nge: 1500 mm (59,0") Rack PDU mit halber L nge: 575 mm (22,6")SELECTMAINO utlet CurrentTemp/HumiditySoftware InfoSKU/Serial #SELECTMAINO utlet CurrentTemp/HumiditySoftware InfoSKU/Serial #SELECTMAINIP Konfigurieren der Netzwerkeinstellungen und Zugriff auf die Rack PDUDie Rack PDU ist DHCP-kompatibel.

10 Verbinden Sie das Netzwerkkabel mit dem Netzwerkanschluss ( ) und schalten Sie dann das Ger t ein. Sobald die Status-LED ( ) f r die Netzwerkverbindung ununterbrochen gr n leuchtet, k nnen Sie sich die IP-Adresse wie nachfolgend beschrieben anzeigen in Ihrem Netzwerk kein DHCP-Server aktiv ist, informieren Sie sich bitte im Benutzerhandbuch zu Ihrer Rack PDU ber andere M glichkeiten zum Konfigurieren der Dr cken Sie die BILDLAUFTASTE ( ), um das Men zu Dr cken Sie die BILDLAUFTASTE ( ), bis der Eintrag Software Info markiert Dr cken Sie die AUSWAHLTASTE ( ). Die IP-Adresse wird Um die Web-Schnittstelle zur Software der Rack PDU zu ffnen, geben Sie die IP-Adresse in das Adressfeld Ihres Browsers ein.


Related search queries