Fail-Safe - Cooper Industries

1 Fail-SafeCatalog # Type Date Project Comments Prepared by SPECIFICATION FEATURESM ountingRecessed grid for 1 or 1 1/2 NEMA Type G ceiling systems. Overlapping door compatible with 2 wide ceiling systems, with standard on-center spacing (1 x 4, 2 x 2, 2 x 4). Recessed flange for use with hard-pan ceilings. Optional mounting safety clips (4) available. Surface mount using (4) , heavy gauge steel, powder coat painted white. Seam-welded construction, absent of holes. Optional stainless steel (Type 304 or 316) or door, constructed of one piece die-formed steel, stainless steel (304 standard, 316 optional) or aluminum. Inset door, constructed of die-formed steel, stainless steel (304 standard, 316 optional), or aluminum. All doors attached to the housing with two stainless steel aircraft , countersunk stainless steel Philips head screws secure door frame to the to Door Frame: One piece continuous closed-cell silicone gasket seals lens to door Frame to Housing or Ceiling: One piece continuous closed-cell to Grid: Closed-cell silicone 12 acrylic, thick, inverted.

2 Other lenses available, including polycarbonate and available in 2000K, 2700K, 3000K, 3500K, 4000K, and 5000K with 85 CRI. Red (630nm) LEDs available. Life is 50,000 hours at 70% lumen , standard 0-10V gloss, electrostatically applied, white powder coat finish, average minimum reflectance 92%.Compliance/RatingsClass 100 ISO Class 5-8IP66 NSF=NSF2 Listed (Non-food, splash zone)LabelsETL listed for wet locations under covered LED Sealed/ CleanroomVivarium / DarkroomRECESSED FLANGE RECESSED GRID SURFACE2x4/2x21x4/1x2/1x1 Inset or Overlapping DoorWet LocationIP66 RatedISO Class 5, 6, 7, 8 NSF Rated PS519020EN4-23-18 Fail-Safe s LED sealed enclosure product is available with overlapping and inset doors. Available in 1 x 1, 1 x 2, 1 x 4, 2 x 2 and 2 x 4 sizes, the CLP Series cleanroom fixtures are Class 100 rated (English 209E), ISO Class 5-8 rated, IP66 compliant, absent of holes for a robust seal from above the ceiling, and NSF rated.

3 Overlapping door compatible with 2" wide ceiling systems, with standard on-center spacing (1 x 4, 2 x 2, 2 x 4).DESCRIPTION2' x 2'2' x 4'No. of Modules, LevelInput WattsDelivered Lumens*No. of Modules, LevelInput WattsDelivered Lumens* * Approximate delivered lumens, 4000K.* Verify with actual photometric test reports.* A12125 ' x 2 No. of Modules, LevelInput WattsDelivered Lumens* ' x 4'No. of Modules, LevelInput WattsDelivered Lumens* Approximate Color Temperature and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: NUMBERS: CLPF-12-4-ALH-INA-A12125-LD4-2 STD-40-UNV-EDC2-AMD (White only) CLPG-24-2-ALH-INA-A19156-LD4-4 STD-50-UNV-EDC1-EL10W-DF-AMA (White only) ProductFamilySeriesCLPF=Recessed 2 FlangeCLPFE=RecessedFlange Extended 2 CLPG=Recessed Grid(1", 1-1/2", 2" NEMA G) 3,6 CLPS=Surface (available in 1x4, 2x2, and2x4)EL7W=7W EM PackEL10W=10W EM PackEL14W=14W EM PackAMA=Anti-microbial, All Parts (Not avaialable with stainless brushed door or housing)AMD=Anti-microbial, Door OnlyDF=Diffusing FilmMSB4=Mounting Safety Brackets(4) with Hardware24=24" Wide12=12" WideAccessories MSB4-PK=Mounting Safety Brackets(4) with HardwareWidthLength1=1' Length2=2' Length4=4' LengthHousing MaterialBlank=Cold Rolled Steel, PowderCoat Painted WhiteALH=Aluminum Housing,Painted Powder Coat WhiteSHB=Stainless Steel (304) BrushedSH316B=Stainless Steel (316)

4 BrushedSHP=Stainless Steel (304)Powder Coat Painted WhiteSH316P=Stainless Steel (316)Powder Coat Painted WhiteDoor TypeInset Die Formed, One PieceINS=Inset Door,Die-formed Steel,Painted WhiteINA=Inset Door,Die-formed Aluminum,Painted WhiteINSSP=Inset Door,Die-formed StainlessSteel, Painted White (Replace P with Bfor Brushed)INSS316P=inset Door,Die-formed StainlessSteel (316) Painted White (Replace P with Bfor Brushed)Overlapping, One Piece 6 OLS=Overlapping Door,Die-formed Steel,Painted WhiteOLA=Overlapping Door,Die-formed Aluminum,Painted WhiteOLSSP=Overlapping Door,Die-formed Stainless Steel, Painted White - (Replace P with B for Brushed)OLSS316P=OverlappingDoor, Die-formed StainlessSteel (316), Painted White (Replace P with B forBrushed)LensA12125=Pattern 12 Acrylic, " Thick,InvertedA19156=Pattern 19, " Thick, InvertedP12125=Pattern 12 Polycarbonate, "Thick, InvertedOther Lenses / thicknessesavailable, consult factory or the Lens Ordering Guideon web-siteLEDsLD4=Linear LED, Version of LEDs1=(1) LED Module in X-section2=(2) LED Modules in X-section3=(3) LED Modules in X-section (2' Width Only)4=(4) LED Modules in X-section (2' Width Only)5=(5) LED Modules in X-section (2' Width Only)Illumi-nationLevelSTD=StandardLO=Lo wHI= (White LEDs only)27=2700K (White LEDs only)30=3000K (White LEDs only)35=3500K (White LEDs only)40=4000K (White LEDs only)50=5000K (White LEDs only)R63=Red, 630nm (Red LEDs only) Voltage120=120V277=277 VUNV=120-277 VDriverEDC_=Electronic Driver, Non-DimmingEDD_=Electronic Driver, 0-10V Dimming,10%ED1D_ Electronic Driver, 0-10V Dimming,1% Options 1.

5 4 and 5 Circuits only available with 4 length fixtures. 2. Flange and extended flange ship standard with (4) Swing-out brackets for quick and easy installation. 3. Hard metric fixtures available (600mm x 600mm, 300mm x 1200mm, 600mm x 1200mm). Consult product technical support to verify ceiling compatibility (Main-T height and width, Cross-T height and width, other related specifications). 4. Emergency requires backbox on fixture top, which adds approximately 3 to fixture height. 5. Emergency not available on CLPS (surface mount). 6. Compatible with 2" wide ceiling systems with standard on-center spacing (1 x 4, 2 x 2, 2 x 4). 7. MSB4 for use with grid fixtures only. 8. CLPF, CLPG with 5 LED modules in cross-section, at HI illumination level require voltage specific thermal protector. 9. 3 Circuit max for 2x2. 4,5,8No. of Circuits 1 = 1 Circuit2 = 2 Circuits3 = 3 Circuits 4 = 4 Circuits 4,5,8 4,5,8 5 Notes: 7 7* Red & White LEDs (5 modules max in cross-section) Rows of White Rows of Red Ilumination Level WhiteColor TempWhite Ilumination Level RedColor TempRedPlease see below for ordering logic for the application of Red & White Leds in combination 123 45123 45 STDLOHISTDLOHI202730 35 40 50 R63 Sample Number: CLPG-24-4-INS-A12125-LD4-4 STD-40-UNV-EDC1 ( White only) Sample Number: CLPF-24-4-INS-A12125-LD4-2LO30/2 LOR63-UNV-EDC2 (White/Red)Sample Number.

6 CLPG-24-4-INS-A12125-LD4-4 LOR63-UNV-EDC1 (Red only) 2x2/2x4 LED Placement (Red/White) Placement of Red & White LEDs# Rows of Red LEDs# Total Rows of LEDs# Rows ofWhite LEDs 213211234121234321 White,Red,WhiteRed,White,RedWhite,White, Red,WhiteWhite,Red,Red,WhiteRed,Red,Whit e,RedRed,Red,White,Red,RedRed,White,Red, White,RedWhite,Red,White,Red,WhiteWhite, White,Red,White,White LUA/ES_=Lutron A-Series, 1% EcoSystem Dimming LUA/3W_=Lutron A-Series, 1% EcoSystem 3-wire Dimming Approximate Lumen Multiplier for Red LED s Color Multiplier from White 4000 KWhite, 4000K1. , 630nm334445555 8,9911 CLPG-24-4-INS-A12125-LD4-3 HIR63-UNV-EDC2 (Red only) CLPG-24-4-INS-A12125-LD4-2 STD35/2 LOR63-UNV-EDC2 (White/Red)ORDERING INFORMATIONCLP - 1 X 1, 1 X 2, 1 X 4, 2 X 2, 2 X 4 PS519020EN4-23-18 Specifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: CLPS Mounting DiaPower DiaMounting Holes (4) " EKO'S for Alternate Power.

7 312 Holes(4) Entry7/8" EKO'S forAlternatePower Entry1x4 CLPS Mounting Detail .312 Holes(4) Entry7/8" EKO'S for Alternate Power Entry2x2 CLPS Mounting Detail* Overall Fixture Depth = * Overall Fixture Depth = * Overall Fixture Depth = CLP - 1 X 1, 1 X 2, 1 X 4, 2 X 2, 2 X 4 PS519020EN4-23-18 Specifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: Bracket - Standard1 Wide, Inset Door1 Wide, Overlapping Door2 Wide, Inset Door2 Wide, Overlapping Door1 Wide, Inset Door2 Wide, Inset Door2 Wide, Overlapping DoorRecessed FlangeRecessed GridCut-Out Dimensions1x4 10-3/4 x 46-3/4 1x2 10-3/4 x 22-3/4 1x1 10-3/4 x 10-3/4 2x422-3/4 x 46-3/4 2x2 22-3/4 x 22-3/4 11-3/4" [298mm]4-3/4"[121mm]8" [203mm]10-1/2" [267mm]10-3/8" [264mm]3-1/2"[89mm]11-3/4" [298mm]1 Wide, Overlapping Door10-3/8" [264mm]3-1/2"[89mm]11-3/4" [298mm]22-3/8" [568mm] 23-3/4" [603mm] 3-1/2"[89mm] 22-3/8" [568mm] 23-3/4" [603mm] 3-1/2"[89mm] 4-3/4"[121mm]8" [203mm]11-3/4" [298mm]10-1/2" [267mm]11-7/8" [302mm]20 [508mm] 23-3/4" [603mm] 22-1/2" [571mm] 4-1/4"[108mm] 20 [508mm]23-3/4" [603mm]22-1/2" [571mm]4-1/4"[108mm] 5-3/16"[132mm]5-3/16"[132mm]5-3/16"[132m m]5-3/16"[132mm] PS519020EN4-23-18 CLP - 1 X 1, 1 X 2, 1 X 4, 2 X 2, 2 X 4