Fail-Safe - Cooper Industries

1 Fail-SafeCatalog # Type Date Project Comments Prepared by SPECIFICATION FEATURESM ountingRecessed grid for 1 or 1 1/2 NEMA Type G ceiling systems. Recessed flange for use with hard-pan ceilings. Mounting safety clips (4) available. Surface mount using (4) 1/2 deep, die-formed, heavy gauge steel, powder coat painted white. Welded construction. Optional die-formed aluminum and stainless door, constructed of one piece die-formed steel, or aluminum, or stainless steel. Inset door, constructed of die-formed steel or aluminum. All doors attached to the housing with two stainless steel aircraft cables. FastenersCaptive, countersunk stainless steel Philips head screws secure door frame to the to Door Frame: Continuous gasket adheres lens to door Frame to Housing: Closed-cell to Grid: Closed-cell gasket (optional).LensPattern 12 acrylic, thick, inverted.

2 Other lenses available, including polycarbonate and available in 2000K, 2700K, 3000K, 3500K, 4000K, and 5000K with 85 CRI. Red (630nm) LEDs available. Life is 50,000 hours at 70% lumen , standard 0-10V. Dimming gloss, electrostatically applied, white powder coat finish, average minimum reflectance 92%.Compliance/RatingsClass 100 ISO Class 5-8IP65 NSF=NSF2 Listed (Non-food, splash zone)LabelsETL listed for wet locations under covered s CLM sealed enclosure product is available with overlapping and inset doors. Available in 1 x 2, 1 x 4, 2 x 2 and 2 x 4 sizes, the CLM Series cleanroom fixtures are Class 100 rated (English 209E), ISO Class 5-8 rated and IP65 ' x 2'2' x 4'No. of Modules, LevelInput WattsDelivered Lumens*No. of Modules, LevelInput WattsDelivered Lumens* * Approximate delivered lumens, 4000K.

3 * Verify with actual photometric test reports.* A12125 ' x 2 No. of Modules, LevelInput WattsDelivered Lumens* ' x 4'No. of Modules, LevelInput WattsDelivered Lumens* 2HI5LO109251413817129142011912923614 CLMLD4 LED Sealed/ CleanroomVivarium / DarkroomRECESSED FLANGE RECESSED GRID SURFACE2x4/2x2/1x4/1x2 Inset or Overlapping DoorWet LocationIP65 RatedISO Class 5, 6, 7, 8 Class 100 NSF3000K4000K Approximate Color Temperature and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: - 1 X 2, 1 X 4, 2 X 2, 2 X 4 CLMLD4 SAMPLE NUMBERS: CLMF-12-4-ALH-INA-A12125-LD4-2 STD-40-UNV-EDC2-MSB4-AMD (White only) CLMG-24-2-INS-A19156-LD4-4 STDR63-120-EDC1-EL10W-DF-AMA (Red only) ProductFamilySeriesCLMF=Cleanroom Moderate Recessed FlangeCLMG=Cleanroom Moderate Grid (1", 1-1/2" NEMA G)CLMS=Cleanroom Moderate Surface (Surface available in 1x4, 2x2 and 2x4 ) 24=24" Wide12=12" WideAccessoriesMSB4-PK=Mounting Safety Brackets (4) with HardwareWidthLength2=2' Length4=4' LengthHousing MaterialBlank=Cold Rolled Steel, PowderCoat Painted WhiteALH=Aluminum Housing,Powder Coat PaintedWhiteSHP=Stainless Steel (304), Powder Coat Painted WhiteSH316P=Stainless Steel (316), Powder Coat Painted WhiteSHB=Stainless Steel (304) BrushedSH316B=Stainless Steel (316)

4 Brushed Door TypeInset Die Formed, One PieceINS=Inset Door,Die-formed Steel,Painted WhiteINA=Inset Door,Die-formed Aluminum,Painted WhiteINSSP=Inset Door,Die-formed Stainless Steel,Painted White(Replace P with B forBrushed)INSS316P=Inset Door,Die-formed (316) Stainless Steel,Painted White(Replace P with B forBrushed)Overlapping, One PieceOLS=Overlapping Door,Die-formed Steel,Painted WhiteOLA=Overlapping Door,Die-formed Aluminum,Painted WhiteOLSSP=Overlapping Door,Die-formed Stainless Steel,Painted White(Replace P with B for Brushed)OLSS316P=Overlapping Door,Die-formed (316) Stainless Steel,Painted White(Replace P with B for Brushed)LensA12125=Pattern 12 Acrylic, " Thick,InvertedA19156=Pattern 19, " Thick, InvertedP12125=Pattern 12 Polycarbonate, "Thick, InvertedOther Lenses / thicknessesavailable, consult factory or Lens Ordering Guide on web-siteLEDsLD4=Linear LED, Version ofLEDs1=(1) LED Module in X-section2=(2) LED Modules in X-section3=(3) LED Modules in X-section (2' width only)4=(4) LED Modules in X-section (2' width only)5=(5) LED Modules in X-section (2' width only)IllumLevelSTD=StandardLO=LowHI= Driver, Non-DimmingEDD_=Electronic Driver, 0-10V Dimming 10%ED1D_=Electronic Driver, 0-10V Dimming 1%LUA/ES_=Lutron A-Series, 1% EcoSystem DimmingLUA/3W=Lutron A-Series, 1% EcoSystem 3-wire Dimming Options1.

5 4 and 5 Circuits only available in 4 length fixture2. Flange ship standard with (4) mounting brackets for quick and easy Hard metric fixtures available (600mm x 600mm, 300mm x 1200mm, 600mm x 1200mm). Consult product technical support to verify ceiling compatibility (Main-T height and width, Cross-T height and width, other related specifications).4. Emergency requires backbox on fixture top, which adds approximately 3 to fixture MSB4 for use with grid fixtures CLMF, CLMG with 5 LED modules in cross section, at HI Illumination level, requires voltage specific thermal Emergency not available on CLMS (surface mount).8 3 Circuit max for 2x2. No. ofCircuits1= 1 Circuit2= 2 Circuit3= 3 Circuit4= 4 CircuitMSB4=Mounting Safety Brackets(4) with hardwareEL7W=7W EM PackEL10W=10W EM PackEL14W=14W EM Pack AMA=Anti-microbial, All PartsAMD=Anti-microbial, Door OnlyGSK=Gasketing applied tohousing flange to rest on grid(CLMG), applied to housingflange to seal against ceiling(CLMF)Notes.

6 4,6,7 2 4,6,7 1 14,6,7 5 520=2000K (White LEDs only)27=2700K (White LEDs only)30=3000K (White LEDs only)35=3500K (White LEDs only)40=4000K (White LEDs only)50=5000K (White LEDs only)R63=Red, 630nm (Red LED only) * Red & White LEDs (5 modules max in cross-section) Rows of White Rows of Red Ilumination Level WhiteColor TempWhite Ilumination Level RedColor TempRedPlease see below for ordering logic for the application of Red & White Leds in combination 123 45123 45 STDLOHISTDLOHI202730 35 40 50 R63 Sample Number: CLMF-24-4-INS-A12125-LD4-4 STD-40-UNV-EDC1 (White only) Sample Number: CLMG-24-4-INS-A12125-LD4-2LO30/2 LOR63-UNV-EDC2 (White/Red)Sample Number: CLMG-24-4-INS-A12125-LD4-4 LOR63-UNV-EDC1 (Red only) 2x2/2x4 LED Placement (Red/White) Placement of Red & White LEDs# Rows of Red LEDs# Total Rows of LEDs# Rows ofWhite LEDs 334442132112123 White,Red,WhiteRed,White,RedWhite,White, Red,WhiteWhite,Red,Red,WhiteRed,Red,Whit e,RedApproximate Lumen Multiplier for Red LED Multiplier from White 4000 KColorWhite, 4000 KRed, 630nm1.

7 6,8555512344321 Red,Red,White,Red,RedRed,White,Red,White ,RedWhite,Red,White,Red,WhiteWhite,White ,Red,White, White 78 CLMG-24-2-INS-A19156-LD4-2HI40/2 STDR63-UNV-EDC2 (White/Red)ORDERING INFORMATIONADC1423374-23-18 Specifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: - 1 X 2, 1 X 4, 2 X 2, 2 X 42x4 CLPS Mounting DiaPower DiaMounting Holes (4) " EKO'S for Alternate Power .312 Holes(4) Entry7/8" EKO'S forAlternatePower Entry1x4 CLPS Mounting Detail .312 Holes(4) Entry7/8" EKO'S for Alternate Power Entry2x2 CLPS Mounting Detail* Overall Fixture Depth = * Overall Fixture Depth = * Overall Fixture Depth = Specifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P.

8 Bracket - Standard1 Wide, Inset Door1 Wide, Overlapping Door2 Wide, Inset Door2 Wide, Overlapping Door1 Wide, Inset Door2 Wide, Inset Door2 Wide, Overlapping DoorRecessed FlangeRecessed GridCut-Out Dimensions1x4 10-5/8 x 46-5/8 1x2 10-5/8 x 22-5/8 2x4 22-5/8 x 46-5/8 2x2 22-5/8 x 22-5/8 3-1/2"[89mm]11-3/4" [298mm]3-1/2"[89mm]10-3/8" [264mm]10-3/8" [264mm]3-1/2"[89mm]11-3/4" [298mm]1 Wide, Overlapping Door10-3/8" [264mm]11-3/4" [298mm]23-3/4" [603mm] 22-3/8" [568mm] 23-7/8" [606mm]22-3/8" [568mm]3-1/2"[89mm] 3-1/2"[89mm]11-3/4" [298mm]10-3/8" [264mm]11-7/8" [302mm]3-1/2"[89mm]23-3/4" [603mm] 22-3/8" [568mm] 22-3/4" [603mm]23-7/8" [606mm]22-3/8" [568mm]3-1/2"[89mm] 22-3/4" [603mm]11-7/8" [302mm]3-1/2"[89mm]ADC1423374-23-18 CLM - 1 X 2, 1 X 4, 2 X 2, 2 X 4