Fail-Safe HVL LD4 LED Vandal Resistant Linear ...

1 Fail-SafeHVL LEDLD4 LED8", 12" WidthIndividual / Continuous Vandal Resistant Linear LEDP olycarbonate LensDie-Cast End CapsAluminum Extruded HousingSPECIFICATION FEATURESH ousingHeavy duty extruded aluminum rails and die-cast end caps provide rigid construction. Finished in matte white standard. Black and dark platinum available. Custom colors also CapsOne-piece, robust, die-cast aluminum end caps. Available flat or sculpted decorative style. Flat Endcaps have (3) 7/8 knock-out for thru-wiring, and (3) 1/4 knock-outs to attach/secure fixtures and ensure ultra-straight rows for continuous run applications. Fasteners Stainless steel TORX center pin reject and allen head set screws provided. Screws are mounted along the fixture side, concealed by the polycarbonate extruded UV stabilized polycarbonate .

2 Unique Linear ribbed design provides uniform light distribution while obscuring lamp image and direct glare. Internal ribs reduce dirt build-up and facilitate cleaning. Nominal thickness . ReflectorHeavy gauge steel reflector serves as a wireway cover and a driver tray. Finished in gloss white powder coat Diode (LED)LEDs available in 3000K, 3500K, 4000K and 5000K with CRI > 85. Projected life is 50,000 hours at 70% lumen , 0-10V dimming listed for wet locations under covered ceiling standard. IP64 available. NSF (optional) = Non-food, splash zone. DesignLights Consortium Quallifed and classified for DLC standard, refer to for details. WarrantyFive year warranty on the LEDs and electrical. Lifetime Warranty if fixture found to be inoperative due to physical abuse for the duration of the 16:02:14 The HVL provides exceptional aesthetics with remarkable strength.

3 Individual or continuous run, surface, or pendant mount provides design flexibility. Die-cast end caps, heavy extruded aluminum body provides strength and rigidity for complex environments while an extruded Linear ribbed polycarbonate lens obscures the lamp image and spreads light evenly. The HVL is ideal for areas where the need for aesthetics and protection from vandalism are critical. Perfect for schools, hospitals, corridors, dormitories, public restrooms, common areas, and transit stations. DESCRIPTIONENERGY DATAFor Energy Management related technical data to support the performance of this fixture series, refer to the ordering information for input wattage. Overall Length Smooth Decorative End Caps End Caps 1' " " 2' " " 4' " " 8' " "OVERALL LENGTH DIMENSIONSC atalog # Type Date Project Comments Prepared by Lifetime WarrantyFail-Safe will provide a replacement fixture for any HVL found to be inoperative due to physical abuse for the duration of the installation.

4 Fail-Safe will not warranty product against some forms of anti-social human behavior involving corrosive chemicals, fire, paint or " " " " " " " " " " " " " " " "319mm(3) 7/8 Knockouts for thru wiring(3) 7/8 Knockouts for thru wiring(3) 3/16 Knockouts for continuous row mounting(3) 3/16 Knockouts for continuous row mountingHVL8 FLAT END CAP DETAILHVL12 FLAT END CAP DETAILD ecorative (-D) endcap shownSpecifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: - LED LD4 SAMPLE NUMBER: INDIVIDUAL: HVL8-4-LD4-2HI-40-UNV-O-EDD1-D CONTINUOUS: HVL12-BR-8-LD4-2LO-40-UNV-O-EDC1-DOption sColorTemperatureRow/NodeConfigurationLE DTypeLengthNo. ofLEDsF inishN otes:D=Decorative, End Caps, SculptedS=Smooth End Caps, Flat Blank=Architectural WhiteBK=Architectural BlackDP=Dark PlatinumNSF=Certified NSF Rating for Food Industry HVL8=8" Harmony VR Linear HVL12=12" Harmony VR Linear 1=1' Length2=2' Length4=4' Length8=8' LengthO=Opal Smooth (no ribs), PolycarbonateC=Clear Lens, ribbed, PolycarbonateA ccessories (Order Separately)VRSD=T20 Center Pin Tamperproof TORX -head bit1 Stems must be ordered separately.

5 Not available wet location under covered ceiling. IP64 not In-Line Wiring (8' fixture only) Product FamilyVoltageUNV=120-277 VLensTypeDriverEndCapsEDC_= Electronic Driver, Non-DimmingEDD_= Electronic Driver, 0-10v Dimming 10%ED1D_= Electronic Driver, 0-10v Dimming 1%1 5PM= Pendant MountER=End of runMR=Middle of run BR=Beginning of runLD4=LEDV ersion Leave blankContinuous Run PI1 BLK-6PP-WG =Single circuit harness, hot conductor black and white neutralconnected to driver(s), with ground 3, 4IB/OB= Inboard/outboard wiring (only necessary for 8T) OS1 = Integrated Motion/Occupancy Sensor (within lens) connected to 1 LED module. Specify 120v or 277v. 2,7OS2 = Integrated Motion/Occupancy Sensor (within lens) connected to 2 LED modules.

6 Specify 120v or 277v. 2,7EL7W = 7W Emergency Battery Pack 6,8EL10W = 10W Emergency Battery Pack 6,8EL14W = 14W Emergency Battery Pack 6,8IP64 = IP64 compliant (water: GPM, PSI minimum, spray all directions, 20 minutes. Dust: no internal accumulation, 20 minutes in dust chamber)NAT=Natatorium Finish, Aluminum Components, Stainless steel Hardware2 Two module cross-section max with OS option. Voltage specific 120v or =Dual circuit harness, hot black conductor and white neutralconnected to driver(s), with ground 3, 4PI2 BLU-6PP-WG =Dual circuit harness, hot blue conductor and white neutralconnected to driver(s), with ground 3, 43 Consult factory for additional Black conductor connected to outboard lamp - default at factory with inboard/outboard Kelvin35=3500 Kelvin40=4000 Kelvin50=5000 Kelvin5 For MR (middle of run) luminaires, do not specify end cap style.

7 Defaults to flat. 6 Consult factory for manufacturer/catalog number of EM pack. Not available in 1 ft. or 2 ft. length. 7 The FM105 occupancy sensor operates at which may interfere with wireless network signals if they are operating on that same HVL8 3HI option not available with emergency battery pack. LD41=(1) LED Module in Cross-section2=(2) LED Modules in Cross-section3=(3) LED Modules in Cross-section IlluminationLevelSTD=StandardLO=LowHI=Hi gh 1 Circuit4= 4 Circuits2= 2 Circuits3= 3 Circuits ORDERING INFORMATIONB eginning: (1) HVL8-BR-8-LD4-2 STD-40-UNV-O-EDC1-DMiddle: (1) HVL8-MR-8-LD4-2 STD-40-UNV-O-EDC1 End: (1) HVL8-ER-8-LD4-2 STD-40-UNV-O-EDC1-DBeginning: (1) HVL8-BR-8-LD4-2 STD-40-UNV-O-EDC1-SMiddle: (1) HVL8-MR-8-LD4-2 STD-40-UNV-O-EDC1 End: (1) HVL8-ER-8-LD4-2 STD-40-UNV-O-EDC1-S Decorative End CapsFlat (Smooth) End CapsORDERING INFORMATION EXAMPLE: (3) 8' FIXTURES, 24' RUNPS519017EN2017-11-09 16:02.

8 14 NOMINAL INPUT WATTS/NOMINAL DELIVERED LUMENSI llumination LevelInput Watts* Nominal input wattage values include LED voltage, drive current, and typical driver effi ciency. Refer to LM79 data/photometric fi les for exact delivered lumen and input wattage values. Values in table are nominal values only. DeliveredLumensCLEAR LPW 1 LO 2696 1 STD 3595 1 HI 4394 2 LO 5199 2 STD 7018 2 HI 8460 Number of ModulesIllumination LevelInput WattsHVL12-4 Clear and Opal Lens DeliveredLumensCLEAR LPW 2 LO 5098 2 STD 6911 2 HI 8413 3 LO

9 7598 3 STD 10204 3 HI 12350 Number of Modules 3 LO 7798 3 STD 10527 3 HI 12690 HVL12-4 Clear and Opal Lens HVL8-4 Clear and Opal Lens BR (Beginning Run)MR (Middle Run)ER (End Run)Decorative endcapson left, flat endcapon right, to attachto MR endcaps on both ends,by default. Decorative endcapson right, flat endcapon left, to attachto MR endcapson both endsto attach toMR End Caps - Continuous Run (-D) Flat (Smooth) End Caps - Continuous Run (-S) Flat endcaps on both ends,by default.

10 Flat endcapson both endsto attach toMR (Beginning Run)MR (Middle Run)ER (End Run)Specifications and dimensions subject to change without 1121 Highway 74 SouthPeachtree City, GA 30269P: 8 CORNER MOUNT BRACKET HVL8-2T5CM = 8 , 2Ft. T5 Corner Mount HVL8-2T8CM = 8 , 2Ft. T8 Corner Mount HVL8-2 LEDCM = 8 , 2Ft. LED Corner MountHVL8-4T5CM = 8 , 4Ft. T5 Corner Mount HVL8-4T8CM = 8 , 4Ft. T8 Corner Mount HVL8-4 LEDCM = 8 , 4Ft. LED Corner MountNote: 1 Requires 90-degree offset 1/4 driver and VRSB bit for = 12 , 2Ft. T5 Corner Mount HVL12-2T8CM = 12 , 2Ft. T8 Corner Mount HVL12-2 LEDCM = 12 , 2Ft. LED Corner MountHVL12-4T5CM = 12 , 4Ft. T5 Corner Mount HVL12-4T8CM = 12 , 4Ft. T8 Corner Mount HVL12-4 LEDCM = 12 , 4Ft. LED Corner MountNote: 1 Requires 90-degree offset 1/4 driver and VRSB bit for CORNER MOUNT BRACKET PENDANT MOUNT: Suspension Sets - Stem Sets XX = Length ( 6, 8, 12, 24, 36, 48, 60, 72)SCF-XX-B = Fixed Stem SetNOTE: Coupler, 3/8 IPS Pipe Coupler to join lengths.