FDA-L5M - FEELUX

1 LED Lighting Interface ( DMX512 To PWM DC 12V / 24V )FDA-L5MI N S T R U C T I O NSPECIFICATIONMODEL NAMERATED INPUTRATED OUTPUTFDA-L5 MDC 12V/24V, 12V/24V, SIGNALOUTPUT SIGNALCONNECTIONDMX512 PWM DC 12V/24V, 5 CHDC 12V/24V LED LAMPCOMPONENTS and WIRINGINSTALLATIONDC OUTPUT1CH - LED2CH - LED3CH - LED4CH - LED5CH - LEDDC 12V / 24 VFDA-L5 MOpen the side covers withproper toolsFollowing the wiring diagram,connect each wires toinput/output terminalsCAUTION make sure each input/output isconnected to corresponding terminalsArrange wires into the centerand assemble the coverCAUTION make sure wires are not pressedby coversAdust settings using thedip switch on the sideCAUTIONP ower should be applied aftercompleting all settingsDC 12V/24 VLED DRIVERDMX MODEW orking when you set up the address 1-511 DIMMING SPEEDOFF - Instant dimmingON - Smooth dimmingOFF - LED off at No signalON - LED on at No signalOFF - 5 channelON - 1 channel (working same time)SAFETY PRECAUTION1.

2 Disconnect all power sources before installation2. Do not connect more than 2A per channel and total 10A3. Do not touch with wet hand. There is a chance of electric shock4. Do not install this product close to flammables5. Do not install this product in humid place or exposed area6. Turn off the power immediately in case of smoke or strange odor7. Do not force to pull off fixed wires8. Do not convert and impact product. It causes breakdown or electric shockFEELUX CO.,LTD ( )235-48, Gwangjeok-ro, Gwangjeok-myeon, Yangju-si, Gyeonggi-do, Korea TEL. +82-(0)70-7780-8200 FAX. +82-(0)70-7780-8209 WARRANTYM anufacturing defect and faulty occurs in normal use with the warranty period, product can be repaired at no charge by FEELUX customer period : one year after the purchase * Working Test mode when you set up the address 0* When EDIT 1 time, S/W 2 times on/off in 5 seconds, Indicater LED is ON/OFF