Transcription of Fig. 4L Longitudinal “In-Line” Sway Brace Attachment
1 Longitudinal 4L Longitudinal In- line sway Brace AttachmentSize Range 2 through 8 Carbon SteelFunction For bracing pipe against sway and seismic Underwriter s Laboratories Listed in the USA (UL) and Canada (cUL) 2 - 8 . Approved by Factory Mutual Engineering (FM), 2 - 8 Instructions The Fig. 4L is the braced pipe Attachment component of a Longitudinal sway Brace assembly. It is intended to be combined with the bracing pipe and TOLCO structural Attachment component to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines should be Install Place the Fig. 4L over the pipe to be braced and tighten bolts. Then engage bracing pipe into jaw opening and tighten set bolt until hex head snaps off. Jaw Attachment can pivot for adjustment to proper Brace PlainNote Available in Electro-Galvanized and HDG By Figure number, pipe size and WeightsSizesMax.
2 Rec. Load Lbs. (cULus)*Max. Lbs. (FM) Size25 3/82 1/162 1/161/22015 2472 1/26 7/162 1/22 3/41/220153000253372 3/43 1/161/22015155026848 1/23 3/83 11/161/22015155034859 3/43 7/84 3/81/220151450380611 1/255 1/81/220151450640813 1/45 5/85 5/81/220151450728 Cooper B- line , Inc. s ( Cooper B- line ) seismic bracing components are designed to be compatible only with other Cooper B- line bracing components, resulting in a listed seismic bracing assembly. Cooper B- line s warranty for seismic bracing components will be the warranty provided in Cooper B- line s standard terms and conditions of sale made available by Cooper B- line , except that, in addition to the other exclusions from Cooper B- line s warranty, Cooper B- line makes no warranty relating to Cooper B- line s seismic bracing components that are combined with products not provided by Cooper Riser Brace (Plan View)* Load shown is allowable with Brace installed, between 30 - 90.
3 No reduction of load based on Brace angle is approved when used with 1 , 11 4 , 1 or 2 Sch. 40 Brace pipeCOOPER B- line 1375 Sampson Ave Corona, CA 92879 FAX.
