FINAL DRAFT prEN 13241-1

1 EUROPEAN STANDARDNORME EUROP ENNEEUROP ISCHE NORMFINAL DRAFTprEN 13241 -1 February 2003 ICS versionIndustrial, commercial and garage doors and gates - Productstandard - Part 1: Products without fire resistance or smokecontrol characteristicsPortes et barri res industrielles, commerciales et de garage- Norme de produit - Partie 1: Produits sanscaract ristiques coupe-feu, ni pare-fum eTore - Produktnorm - Teil 1: Produkte ohne Feuer- undRauchschutzeigenschaftenThis DRAFT European Standard is submitted to CEN members for formal vote.

2 It has been drawn up by the Technical Committee CEN/TC this DRAFT becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any DRAFT European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the samestatus as the official members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited : This document is not a European Standard.

3 It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European COMMITTEE FOR STANDARDIZATIONCOMIT EUROP EN DE NORMALISATIONEUROP ISCHES KOMITEE F R NORMUNGM anagement Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national No. pren 13241 -1:2003 EprEN 13241 -1:2003 (E) ..41 Scope .. applications ..62 Normative references ..63 Terms and .. aspects.

4 For manual operation .. resistance .. durability .. of glazing/glass against against tripping .. of dangerous operation .. against crushing, shearing and drawing-in .. forces .. compatibility (EMC) .. of manually operated requirements for specific performance tightness .. to wind load .. resistance .. permeability .. of the performance characteristics .. for installation, operation and maintenance ..135 Marking and labelling ..136 Evaluation of .. type test .. on site .. control ..14 Annex A (informative) Form for designation and classification of performances.

5 16 Annex B (normative) Procedure for the determination of values for thermal ..17 Annex C (informative) Safety factors to be considered in door design in respect of their resistance towind ZA (informative) Relationship of this European Standard with the Construction ProductsDirective .. of this European Standard addressing the provisions of EU Construction ProductsDirective ..20prEN 13241 -1:2003 (E) for the attestation of conformity of industrial, commercial and garage doors Procedure according to system 3.

6 And ZB (informative) Relationship of this European Standard with the Machinery Directive ..25 Annex ZC (informative) Relationship of this European Standard with the EMC Directive ..26 Bibliography ..27prEN 13241 -1:2003 (E)4 ForewordThis document pren 13241 -1:2003 has been prepared by Technical Committee CEN /TC 33, "Doors, windows,shutters, building hardware and curtain walling", the secretariat of which is held by document is currently submitted to the Formal European Standard is part of a series of product standards for industrial, commercial and garage doors andgates with or without fire resistance or smoke control characteristics (see Bibliography).

7 This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annexes ZA, ZB and ZC, which are integral parts of A and C are informative. Annex B is document includes a existing European Standard is the aim of clarifying the intentions of this European Standard and avoiding doubts when reading it, thefollowing assumptions were made when producing it:a) components without specific requirements are: designed in accordance with the usual engineering practice and calculation codes, including all failuremodes; of sound mechanical and electrical construction.

8 Made of materials with adequate strength and of suitable quality; general electrical hazards are dealt with according to electrical safety standards such as EN 60204 ) components are kept in good repair and working order, so that the required characteristics remain during theeconomical working life despite wear;c) with the exception of the items listed below, a mechanical device is built according to good practice and therequirements of this European Standard: negotiations occur between the manufacturer and the purchaser concerning particular conditions for theuse and places of use for the door related to health and safety; the place of use/installation to be adequately lit.

9 The place of use/installation to allow safe use of the assumptions do not restrict the need for adequate information for use in this European 13241 -1:2003 (E)51 GeneralThis European Standard specifies the safety and performance requirements for doors, gates and barriers, intendedfor installation in areas in the reach of persons, and for which the main intended uses are giving safe access forgoods and vehicles accompanied or driven by persons in industrial, commercial or residential European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retailpremises which are mainly provided for the access of persons rather than vehicles or doors can include pass doors incorporated in the door leaf which are also covered by this devices can be manually or power European Standard does not cover operation in environments where the electromagnetic disturbances areoutside the range of those

10 Specified in EN ExclusionsThis European Standard does not apply to the following which are intended for a different use: lock gates and dock gates; doors on lifts; doors on vehicles; armoured doors; doors mainly for the retention of animals; theatre textile curtains; horizontally moving manually operated pedestrian doors with a leaf size less than 6,25 m ; horizontally moving power operated doors less than 2,5 m wide and 6,25 m area, designed principally forpedestrian use in accordance with pren 12650-1; revolving doors of any size; railway barriers; barriers used solely for European Standard does not cover the radio part of doors.