Example: barber
Fire Rated Systems - gib.co.nz
Fire rated floor/ceiling systems Fire rated floor/ceiling Specification number LB/ NLB STC/ Rw FRR IIC Lining requirements Page Timber joist GBFC 15 LB 38/38 15/15/15 31 1 layer 13mm GIB® Standard 54 GBFC 30 LB 39/40 30/30/30 32 1 layer 13mm GIB Fyreline® 56 GBFC 45 LB 39/40 45/45/45 32 1 layer 13mm GIB Fyreline® 56 GBFC 60 LB 39/40 60/60/60 32 1 layer 16mm GIB Fyreline® 58
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Intertenancy Barrier Systems for Terrace Homes
www.gib.co.nzThe GIB® Wall Clips are intended to melt on the fire side only, allowing collapse without damage to the remaining system. Noise control performance The noise control performance of the GIB® Intertenancy Barrier Systems for Terrace Homes is expressed in terms of Sound Transmission Class (STC) and Weighted Sound Reduction Index (Rw).
Deflection Head Details JANUARY 2006 - GIB®
www.gib.co.nzFire rated sealant 2 strips of GIB¤ Plasterboard (same as linings) Wall frame top channel Steel studs GIB¤ Plasterboard wall linings (as specified to …
Noise Control Systems - GIB
www.gib.co.nzThis technical document provides noise control systems for designers, specifiers and builders. This information can be used during the building design process to help select systems to achieve the desired level of acoustic comfort. GIB Noise Control ® Systems have been independently tested and evaluated and can be depended on to perform.
EzyBrace Systems - GIB
www.gib.co.nzdesign flexibility and further simplification of the bracing design and build process. NEW GIB EZYBRACE® 2016 DESIGN SOFTWARE — Improved user interface with simplified bracing design process. — Increased functionality including exterior line check function, easy insert/deletion of bracing elements and built in software help function.
SyStem and InStallatIon manual - GIB
www.gib.co.nz• GIB Quiet Clip ® for use in GIB Noise control systems Alternative method • Directly by fastening with pairs of min GIB Grabber® 32mm x 8g wafer head screws through the flange (consult span tables pg 5) • Alternatively pairs of min 45mm x 2.8mm FH nails can be used • For fixing to steel framing a drill tip screw is recommended
Related documents
BARRIER
ecoplybarrier.co.nzBARRIER SPECIFICATION & INSTALLATION GUIDE SEPTEMBER 2017 Information contained within is specific to Ecoply® Barrier structural plywood products and must not be used with any other plywood products, no matter how similar they may appear.