Fisher Vee-Ball V150, V200, and V300 Rotary …

1 Vee-Ball V150, V200, and v300 Rotary control ValvesThis bulletin covers the DN 25 through 600 (NPS 1through 24) V150, V200 and v300 Vee-Ball controlvalves. The Vee-Ball valve combines globe valveruggedness with the efficiency of a Rotary valve. TheVee-Ball valve is a segmented ball valve which featuresa contoured segmented V-Notch ball. A shearingaction between the V-notch ball and the ball seal(figure 1) promotes smooth, nonclogging unrestricted straight-through flow design provideshigh capacity for gas, steam, liquids, and , V200, and v300 valves mate with a variety ofASME raised face flanges, as well as with EN flanges(see Specifications).

2 To meet specific application requirements, a variety ofmetal and soft ball seal materials are available. Asplined drive shaft combines with a variety of poweroperated and manual actuators to provide reliable,high-performance throttling or on-off operation formany different applications in the process Trim Versatility Trim components areinterchangeable between V150, V200, and V300valves. This feature allows you to reduce your spareparts inventory and maintenance procedures. Theseal assembly can be changed without removingthe actuator or without removing the ball from thevalve Easy Installation Flanged body design of the V150and v300 eliminates exposed line flange bolting,reduces alignment and installation time, andpromotes secure valve installations and pipingintegrity.

3 The V200 is available with flanges in NPS 2through Vee-Ball valves with Fisher 2052 Actuators andFIELDVUEt DVC6200 Digital Valve ControllersV300 NPS 6 v300 Cutaway Image with Optional Cavitrol Hex Anti-Cavitation TrimX1560 Vee-Ball ValvesD101363X012 Product :Vee-BallSeptember 2018 Vee-Ball ValvesD101363X012 Product :Vee-BallSeptember 2018 2 SpecificationsValve SizesSee table 1 Valve End Connection StylesV150: Flanged valves that mate with CL150raised-face flanges and EN 1092-1 Type B raised-faceand Type F RecessV200: Flangeless (all sizes) and flanged valves thatmate with CL600 raised-face flanges (NPS 2-8) v300 : Flanged valves that mate with CL300raised-face flanges and EN 1092-1 Type B raised-faceand Type F RecessMaximum Inlet Pressures(1)V150 or v300 WCC (or Steel), CF3M ( SST), CG8M, LCC, M35-2, CK3 McuN, CD3MN,and CD3 MWCuN valves : Consistent with CL150 forV150 or CL300 for v300 pressure-temperatureratings per ASME or with PNpressure-temperature ratings shown in table 1.

4 Note: CF3M is the standard material offering inEurope and Asia-Pacific. Steel and SSTare also standard material offerings in WCC, CG8M, and LCC valves : Consistent withapplicable pressure-temperature ratings in table 1 perASME : Consistent with applicablepressure-temperature ratings shown in table not exceed the material temperature capabilitiesshown below or the pressure drop Shutoff Pressure/Temperature Ratings(1)Composition ( Fisher TCM Plus or TCM Ultra), FlatMetal (NPS 3 through 12 valves only), HD and HighTemperature HD Metal Ball Seals and Flow Ring.

5 Seetable Classification(1) Fisher TCM Plus or Ultra Ball Seal (Forward Flow):Class VI per ANSI/FCI 70-2 and per IEC 60534-4,Flat Metal Ball Seal for NPS 3 through 12 only(Forward Flow): Class IV per ANSI/FCI 70-2 and per IEC60534-4, HD (Heavy Duty) Ball Seal (Bidirectional Flow): valve capacity; Class IV per ANSI/FCI 70-2 and IEC60534-4; Maximum allowable pressure drop inreverse flow is bar (100 psi);High Temperature HD (Heavy Duty) Ball Seal(Bidirectional Flow): Class III per ANSI/FCI 70-2 andIEC 60534-4 Flow Ring Construction (Bidirectional Flow): 5% ofvalve capacity at full travelMicro-Notch Ball with HD Seal: 4 SCFH (Leakage rateequivalent to Class IV for standard ball.)

6 This is basedon the capacity of a standard ball.)Construction MaterialsSee tables 5 and 6 Temperature Capabilities(1,2)Composition SealsFisher TCM Plus: -46 to 232_C (-50 to 450_F) Fisher TCM Ultra: -46 to 260_C (-50 to 500_F) HD Metal Seals: -46 to 288_C (-50 to 550_F)PEEK HD Seal: -46 to 232_C (-50 to 450_F)High Temperature HD Metal Seal: 288 to 427_C (550to 800_F). Contact your Emerson sales office if highertemperatures are Micro-Notch Ball: -46 to 93_C (-50 to200_F)(4)Flow Ring or Flat Metal Seal : -198 to 425_C (-325 to800_F)PEEK/PTFE Bearings: -198 to 260_C (-325 to 500_F)Packing ConstructionsPTFE V-ring: -46 to 232_C (-50 to 450_F)Graphite: -198 to 538_C (-325 to 1000_F)ENVIRO-SEALt Single PTFE V-ring: -46 to 232_C (-50to 450_F) (for 100 ppm service requirements)ENVIRO-SEAL Graphite: -7 to 316_C (20 to 600_F) (for100 ppm service requirements).

7 This packingarrangement can be used to 371_C (700_F) fornon-environmental CharacteristicModified equal percentageDimensionsSee figures 10, 11, and 13 for dimensionsFace-to-Face DimensionsJStandard Face-to-Face dimensions comply with short face-to-face dimensions areavailable as an option for NPS 1 through 12 that ASME short dimensions are longerthan ISA See figure 14 for dimensions.(continued) Vee-Ball ValvesD101363X012 Product :Vee-BallSeptember 2018 3 Specifications (continued)Standard Flow DirectionForward (into the convex face of the V-notch ball)Flow Coefficients, Flow Coefficient Ratio(3), andNoise LevelsSee Fisher Catalog 12 Maximum Ball Rotation90 degreesActuator MountingStandard valve construction is for right-handmounting, as viewed from upstream end of (optional) mounting is available uponrequest(5)Valve/Actuator ActionWith diaphragm or piston Rotary actuator, the valve isfield-reversible between PDTC or PDTO.

8 Jpush-down-to-close (extending actuator rod closesvalve) and Jpush-down-to-open (extendingactuator rod opens valve)Approximate WeightSee table 2 OptionsJPipe plug at end of follower shaft for all sizes,JLine flange bolting, JMaterials that arecompatible with sour service, JAlloy constructionmaterials, JENVIRO-SEAL packing system: See figure9 and Bulletin :041, ENVIRO-SEAL PackingSystems for Rotary valves (D101638X012) for moreinformation, JMicro-Notch construction for NPS 1 valves (see Micro-Notch Construction section),JAlloy trim material , JChrome Carbide coatedinternals (NPS 2 through 12), JRotary attenuator toreduce aerodynamic noise and cavitation effects,JDouble D, Square, and Keyed shaft options,JCavitrol Hex anti-cavitation trim1.

9 The pressure/temperature limits in this bulletin, and any applicable code or standard limitation, should not be Additional limits are shown in tables 7, 8 and Ratio of maximum flow coefficients to minimum usable flow coefficient can also be called For the CG8M and alloy 6 Micro-Notch constructions, pressure and temperature capabilities are the same as for standard True left-hand mount is not available for Micro-Notch constructions, as it will cause the ball to rotate to the bottom of the valve of ContentsFeatures B Construction Service Attenuator Hex Anti-Cavitation Trim Drops ValvesD101363X012 Product :Vee-BallSeptember 2018 4 Features (continued)n Application Versatility The valves are available withISA and IEC 534-3-2 face-to-facedimensions as a standard construction, andoptional ASME short face-to-facedimensions.

10 IEC face-to-face dimensionsare equivalent to Long Service Life The solid HD ball seal (figures 1and 2) construction provides long service life indemanding applications. The constant wipingaction of the seal across the ball's sealing surfaceprevents scale and sludge buildup, and providesexcellent service on steam, gases, slurries, andvarious liquid Excellent Flow control Precise contouring of theVee-Ball provides a modified equal percentage flowcharacteristic. For very precise control of low flowrates, the Micro-Notch option is available on theNPS 1 valve.