Fisher Vee-Ball V150, V200 and V300 Rotary Control Valves

1 Product Bulletin :Vee ball D101363X012. June 2010 Vee ball Valves Fisherr Vee-Ballt V150, V200 and v300 Rotary Control Valves This bulletin covers the NPS 1 through 2, NPS 3 ASME raised face flanges, as well as with DIN. through 12 Series B, and the NPS 14 through 20 flanges (see Specifications). V150, V200 and v300 Vee-Ball Control Valves (shown in figure 1). The Vee-Ball valve combines To meet specific application requirements, a variety globe valve ruggedness with the efficiency of a of metal and soft ball seal materials are available. A. Rotary valve. A shearing action between the V-notch splined drive shaft combines with a variety of power ball and the ball seal (figure 2) promotes smooth, operated and manual actuators to provide reliable, nonclogging operation. The unrestricted high-performance throttling or on-off operation for straight-through flow design provides high capacity many different applications in the process industries.

2 For gas, steam, liquids, and fibrous slurries. Unless otherwise noted, all NACE references are to V150, V200, and v300 Valves mate with a variety of NACE MR0175-2002. W8172-2 V150 W9161-1 V200. Figure 1. Typical Vee-Ball Valves with Fisher 1052 Actuators and FIELDVUEt DVC6020 Digital Valve Controllers Product Bulletin :Vee ball Vee ball Valves June 2010. Specifications Valve Sizes and End Connection Styles and High Temperature HD Metal ball Seals and Flow Ring: See table 8. V150: NPS J 1, J 1 1/2, J 2, J 3, J 4, J 6, J 8, J 10, J 12, flanged Valves that mate with Shutoff Classification(1). CL150 raised-face flanges (see table 1). Also, Fisher TCM Plus or Ultra ball Seal (Forward NPS 3 through 12 mate with PN classes (see Flow): Class VI per ANSI/FCI 70-2 and per IEC. table 1) 60534-4, Flat Metal ball Seal for NPS 3 through 12. V150: NPS J 14, J 16 and J 20: flanged Valves only (Forward Flow): Class IV per raised-face Valves . NPS 14 and 16 Valves are ANSI/FCI 70-2 and per IEC 60534-4, available in ASME Short, face-to-face HD (Heavy Duty) Metal ball Seal (Bidirectional dimensions only (see table 1 and figure 9).)

3 Flow): of valve capacity; Class IV per V200: NPS J 1, J 1 1/2, J 2, J 3, J 4, J 6, ANSI/FCI 70-2 and IEC 60534-4; Maximum J 8, or J 10 flangeless Valves that mate with allowable pressure drop in reverse flow is bar J CL150, J 300, or J 600 raised-face flanges (100 psi);. depending on size (see table 1) High Temperature HD (Heavy Duty) Metal Seal (Bidirectional Flow): Class III per ANSI/FCI 70-2. v300 : NPS J 1, J 1 1/2, J 2, J 3, J 4, J 6, and IEC 60534-4. J 8, J 10, J 12, J 14, and J 16 Valves mate Flow Ring Construction (Bidirectional Flow): with CL300 raised-face flanges. Also some sizes 5% of valve capacity at full travel mate with PN classes (see table 1) Micro Notch ball : Same leakage as standard ball Maximum Inlet Pressures(1). Construction Materials V150 or v300 Steel, CF3M (316L Stainless See tables 3, 4 and 5. Steel) or CG8M (317 Stainless Steel) Valves : Consistent with CL150 for V150, or CL300 for Temperature Capabilities(1,2).

4 v300 , pressure-temperature ratings per ASME. or with PN pressure-temperature ratings Composition Seals ( Fisher TCM Plus or TCM. shown in table 1 but do not exceed the material Ultra): -46 to 232_C (-50 to 450_F). temperature capabilities shown below or the HD Metal Seals: -46 to 288_C (-50 to 550_F). pressure drop limitations. CF3M is available in all High Temperature HD Metal Seal: 288 to 427_C. areas and is the standard material offering in (550 to 800_F). Contact your Emerson Process Europe. Management sales office if higher temperatures are required. V200 Steel and CG8M (317 Stainless Steel) Ceramic Micro-Notch ball : -46 to 93_C (-50 to Valves : Consistent with applicable 200_F)(4). pressure-temperature ratings in table 1 per ASME Flow Ring or Flat Metal Seal : -198 to 425_C. , but do not exceed the material (-325 to 800_F). temperature capabilities shown below and the PEEK/PTFE Bearings: -198 to 260_C (-325 to pressure drop limitations.)

5 500_F). CW2M Valves : Consistent with applicable pressure-temperature ratings shown in table 6, Packing Constructions but do not exceed the material temperature PTFE V-ring: 46 to 232_C (-50 to 450_F). capabilities shown below and the pressure drop Graphite: -198 to 538_C (-325 to 1000_F). limitations. ENVIRO-SEALt Single PTFE V-ring: 46 to 232_C (-50 to 450_F). ENVIRO-SEAL Graphite: 7 to 316_C (20 to Maximum Shutoff Pressure/Temperature 600_F). Ratings(1). Composition ( Fisher TCM Plus or TCM Ultra), Flow Characteristic Flat Metal (NPS 3 through 12 Valves only), HD Modified equal percentage (continued). 2. Product Bulletin :Vee ball June 2010 Vee ball Valves Specifications (continued). Dimensions Actuator Mounting See figures 6, 7, and 8 for dimensions Standard valve construction is for right-hand mounting, as viewed from upstream end of valve. Optional Face-to-Face Dimensions Left-hand (optional) mounting is available upon request.

6 J ASME short face-to-face dimensions are available as an option for NPS 1 through 12 Valve/Actuator Action Valves . Note that ASME short dimensions are actually longer than ISA See figure 9 With diaphragm or piston Rotary actuator, the for dimensions. valve is field-reversible between PDTC or PDTO: J push-down-to-close (extending actuator rod closes valve) and J push-down-to-open Standard Flow Direction (extending actuator rod opens valve). Forward (into the convex face of the V-notch ball ). Approximate Weight Flow Coefficients See table 2. See Catalog 12. Options Flow Coefficient Ratio(3) J Pipe plug at end of follower shaft for all sizes, See Catalog 12 J Line flange bolting, J Materials that are compatible with NACE MR0175-2002 for sour service (see table 5), J Alloy construction Noise Levels materials, J ENVIRO-SEAL packing system: See See Catalog 12 figure 5 and Bulletin :041, ENVIRO-SEAL. Packing Systems for Rotary Valves for more information, J Micro-Notch construction for Maximum ball Rotation NPS 1 Valves (see Micro-Notch Construction 90 degrees section), J S31254/CK3 MCuN trim material 1.

7 The pressure/temperature limits in this bulletin, and any applicable code or standard limitation, should not be exceeded. 2. Additional limits are shown in tables 6, 7 and 8. 3. Ratio of maximum flow coefficients to minimum usable flow coefficient can also be called rangeability. 4. For the CG8M and alloy 6 Micro-Notch constructions, pressure and temperature capabilities are the same as for standard constructions. Features face-to-face dimensions as a standard construction, and optional ASME short face-to-face D Trim Versatility Trim components are dimensions. IEC face-to-face dimensions are interchangeable between V150, V200, and v300 equivalent to face-to-face dimensions. Valves . This feature allows you to reduce your spare parts inventory and maintenance procedures. The seal assembly can be changed without removing the D Long Service Life The solid HD metal seal actuator or without removing the ball from the valve (figures 2 and 3) construction provides long service body.

8 Life in demanding applications. The constant wiping action of the seal across the ball 's sealing surface D Easy Installation flanged body design of the prevents scale and sludge buildup, and provides V150 and v300 eliminates exposed line flange excellent service on steam, gases, slurries, and bolting, reduces alignment and installation time, and various liquid applications. promotes secure valve installations and piping integrity. D Smooth Valve Operation Precision D Application Versatility The Valves are machined parts and pressure balanced seal designs available with ISA and IEC 534-3-2 allow smooth, precise movement of the ball . 3. Product Bulletin :Vee ball Vee ball Valves June 2010. Table 1. Valve Body Materials, End Connections, and Ratings VALVE BODY SIZE SIZE RATINGS. VALVE DESIGN RATINGS. MATERIAL NPS DN PN. 1, 1 1/2, 2, 3, 4, 6, 8, CF3M CL150 -- -- 10, 12. EN STL , EN DN 25, 40, 50, 80, -- -- PN 10/16. SST , or EN 100, 150, 200, 250.

9 SST (1) -- -- DN 300 PN 16. 1, 1 1/2, 2, 3, 4, 6, 8, DN 25, 40, 50, 80, CL150 PN 10/16. V150 10 100, 150, 200, 250. WCC or CW2M. 12, 16, 20 CL150 DN 300 PN 16. 14 CL150 -- -- 1, 1 1/2, 2, 3, 4, 6, 8, CG8M CL150 -- -- 10, 12 and 14. 1, 1 1/2, 2, 3, 4, 6, 8, CK3 MCUN CL150 -- -- 10 and 12. CL150/300/600. CF3M 1, 1 1/2, 2. raised-face CL150 and 3, 4 CL300/600. raised-face WCC, CG8M, or CL150/300. V200 CW2M Not Available Not Available 6, 8 and CL600. raised-face 10 CL150 raised-face M35-1 1, 1 1/2, 2, 3, 4, 6, 8 CL150, 300 and 600. 1, 1 1/2, 2, 3, 4, 6, 8 CL150, 300 and 600. CK3 MCUN. 10 CL150. 1, 1 1/2, 2, 3, 4, 6, 8, CF3M CL300 -- -- 10, 12. WCC or 1, 1 1/2, 2, 3, 4, 6, 8, CL300 -- -- CW2M 10, 12, 14, 16. EN STL , EN. v300 DN 25, 40, 50, 80, SST , or EN -- -- PN 25/40. and 100. SST (1). 1, 1 1/2, 2, 3, 4, 6, 8, CG8M CL300 -- -- 10, 12, 14, 16. M35-1 1, 1 1/2, 2, 3, 4, 6, 8 CL300 -- -- 1. 216 WCC and EN Stl are dual certified. CF3M and EN SST are dual certified.

10 D Excellent Flow Control Precise contouring disassembling the valve. Valve maintenance of the Vee-Ball provides a modified equal requires no special tools. percentage flow characteristic. For very precise Control of low flow rates, the Micro-Notch option is D Structural Integrity One-piece valve body available on the NPS 1 valve. See the Micro-Notch improves structural integrity of the pressure Construction section of this bulletin for more boundary by eliminating leak paths that could be information. caused by the gaskets in two-piece, bolted valve designs. D Sour Service Capability Materials are available for applications handling sour service. D Exceptional Environmental These materials comply with the requirements of Capabilities The optional ENVIRO-SEAL packing NACE MR0175-2002. systems are designed with very smooth shaft surfaces and live loading to provide exceptional sealing. The seal of the ENVIRO-SEAL system can D Quick and Easy Maintenance ball seal restrict emissions to less than the EPA.