for AC Compressors XAS 185 KD7 T4 Engine Kubota V2403

1 XAS 185 KD7 T4 Instruction Manual for AC Compressors EnglishEngine Kubota V2403 ATLAS COPCO - PORTABLE ENERGY matter Nr1310 3013 8509/2014 Instruction Manual for AC CompressorXAS 185 KD7 T4 Original instructions- 4 -Warranty and Liability LimitationUse only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product manufacturer does not accept any liability for any damage arising from modifications, additions or conversions made without the manufacturer's approval maintenance or making changes to the setup of the machine can result in major hazards, including fire every effort has been made to ensure that the information in this manual is correct, Atlas Copco does not assume responsibility for possible 2014, Atlas unauthorized use or copying of the contents or any part thereof is applies in particular to trademarks, model denominations.

2 Part numbers and 5 -PrefacePlease read the following instructions carefully beforestarting to use your is a solid, safe and reliable machine, built according tothe latest technology. Follow the instructions in thisbooklet and we guarantee you years of keep the manual available near the all correspondence always mention the compressortype and serial number, shown on the data company reserves the right to make changes withoutprior of contents1 Safety precautions for portable compressor .. safety precautions .. during use and operation .. during maintenance and repair .. applications safety .. fuel Systems .. vessels .. valves .. Injury Prevention.

3 102 Leading particulars .. of Safety Pictograms Used in this Manual .. description .. Parts .. flow .. system .. regulating system .. system .. Diagram .. 203 Operating instructions .. , towing and lifting instructions .. Preparations for Towing .. / Stopping .. Icons .. Off .. Particulate Filter regeneration .. Dpf Regeneration (Default) .. Dpf Regeneration .. Soot Load .. Turning Regeneration Back To Auto .. Force Dpf Regeneration .. Service Regeneration .. Settings .. Fault Codes .. Emergency Stop .. Parking Instructions .. Towing Instructions .. Lifting Instructions .. Starting ..404 Maintenance .. Of Service Paks .. Maintenance Schedule For The Compressor.

4 415 Technical Specifications .. Conditions .. Unit Performance Curve .. Data .. Data .. Oils .. Engine Oil Level .. Compressor Oil Level .. Oil And Oil Filter Change .. Oil And Oil Filter Change .. Coolers .. Care .. A Battery .. Maintenance .. Service Kits ..48- 6 -6 Adjustments And Servicing Procedures .. Of The Continuous Regulating System .. Filter Engine /compressor .. Parts .. The Dust Trap .. The Air Filter Element .. Receiver .. Valve .. System ..517 Problem Solving .. Solving Chart .. Precautions ..528 Maintenance Log .. 549 Maintenance Log .. 55- 7 -Safety precautions for portable compressorIntroductionThe policy of Atlas Copco is to provide the users of theirequipment with safe, reliable and efficient taken into account are among others:-the intended and predictable future use of the products, andthe environments in which they are expected to operate,-applicable rules, codes and regulations,-the expected useful product life, assuming proper service andmaintenance,Before handling any product, take time to read therelevant instruction manual.

5 Besides giving detailedoperating instructions, it also gives specific informationabout safety, preventive maintenance, precautions are general and some statements willtherefore not always apply to a particular handling, operating, overhauling and/orperforming maintenance or repair on Atlas Copcoequipment, the mechanics are expected to use safeengineering practices and to observe all relevant localsafety requirements and ordinances. The following list isa reminder of special safety directives and precautionsmainly applicable to Atlas Copco brochure applies to machinery processing orconsuming air. Processing of any other gas requiresadditional safety precautions typical to the applicationand are not included responsibility for any damage or injury resulting fromneglecting these precautions or by non-observance ofordinary caution and due care required in handling,operating, maintenance or repair, also if not expresslymentioned in this instruction manual, is disclaimed byAtlas any statement does not comply with local legislation,the stricter of the two shall be applied.

6 Statements in thismanual should not be interpreted as suggestions,recommendations or inducements that it should be used inviolation of any applicable laws or safety precautions1 The owner is responsible for maintaining the unit in asafe operating condition. Unit parts and accessoriesmust be replaced if missing or unsuitable for Use only lubricating oils and greases recommended orapproved by Atlas Copco or the machine that the selected lubricants comply with allapplicable safety regulations, especially with regard toexplosion or fire risk and the possibility ofdecomposition or generation of hazardous The supervisor, or the responsible person, shall at alltimes make sure that all instructions regardingmachinery and equipment operation and maintenanceare strictly followed and that the machines with allaccessories and safety devices.

7 As well as theconsuming devices, are in good repair, free ofabnormal wear or abuse, and are not tampered Maintenance, overhaul and repair work shall only becarried out by adequately trained personnel; ifrequired, under supervision of someone qualified forthe Whenever there is an indication or any suspicion thatan internal part of a machine is overheated, themachine shall be stopped but no inspection covers shallbe opened before sufficient cooling time has elapsed;this to avoid the risk of spontaneous ignition of oilvapour when air is Maintenance work, other than routine attention, shallonly be undertaken when the machine is turned Before dismantling any pressurized component, thecompressor or the equipment shall be effectivelyisolated from all sources of pressure and be completelyvented to atmosphere.

8 In addition, a warning signbearing a legend such as "work in progress; do notopen" shall be attached to each of the isolating Before a machine is being repaired, steps shall be takento prevent inadvertent starting. In addition, a warningsign bearing a legend such as "work in progress; do notstart" shall be attached to the starting equipment. Thebattery shall be disconnected and removed or theterminals covered by insulating Normal ratings (pressures, temperatures, speeds, etc.)shall be durably Never operate a machine or equipment beyond its ratedlimits (pressure, temperature, speed, etc.).11 Maintenance and repair work should be recorded in anoperator's logbook for all machinery.

9 Frequency andnature of repairs can reveal unsafe The machinery and pneumatic equipment shall be keptclean, as free as possible from oil, dust or To prevent an increase in working temperature, inspectand clean heat transfer surfaces (cooler fins,intercoolers, water jackets, etc.) regularly. For everymachine establish a suitable time interval for All regulating and safety devices shall be maintainedwith due care to ensure that they function may not be Care shall be taken to avoid damage to safety valvesand other pressure relief devices, especially to avoidplugging by paint, oil coke or dirt accumulation, whichcould interfere with the functioning of the Pressure and temperature gauges shall be checkedregularly with regard to their accuracy.

10 They shall bereplaced whenever outside acceptable Parts shall only be replaced by genuine Atlas Copcoreplacement Safety devices shall be tested as described in themaintenance schedule of the instruction book(s) todetermine that they are in good operating Never use flammable solvents or carbon tetrachloridefor cleaning parts. Take safety precautions againsttoxic vapors when cleaning parts in or with Observe scrupulous cleanliness during maintenanceand repair. Keep away dirt by covering the parts andexposed openings with clean cloth, paper or Protect the Engine , alternator, air intake filter, electricaland regulating components, etc. to prevent moistureingress, when be read attentively and acted accordingly before towing, lifting, operating, performing maintenanceor repairing the 8 -22 When performing any operation involving heat, flamesor sparks on a machine, the surrounding componentsshall first be screened with non-flammable Never use a light source with open flame for inspectingthe interior of a machine, pressure vessel, On portable units, support the drawbar and axle(s)securely if working underneath the units or whenremoving a wheel.