Transcription of FORM 22 A - Bih
1 FORM 22 A [See rules 47(g) ,115(2) 115(6) 115(7) 115(a) 124, 126(A) and 127 INITIAL CERTIFICATE OF COMPLIANCE WITH POLLUTION, STANDARDS, SAFTY STANDARDS OF COMPONENTS AND ROAD worthiness (For vehicles where body is fabricated separately) Part 1 (To be issued by the manufacturer) Certified that .. (Brand name of vehicle) bearing chassis number .. and (engine number or motor number in the case of battery operated vehicles) .. complies with the provisions of the motor vehicles acts, 1998 and rules made there under. Signature of manufacturer Form 22A Part 1 shall be issued with the signature of manufacturer duly printed in the form it self by a affixing a facsimile signature in ink under the hand and seal of the manufacturer Part 2 (To be issued by the body builder) Certified that .. (Brand name of vehicle) bearing chassis number.]
2 And (engine number or motor number in the case of battery operated vehicles) .. complies with the provisions of the motor vehicles acts, 1998 and rules made there under. Signature of manufacturer *Form 22A part-2 shall be issued with the signature the body builder duly printer in from itself by a affixing a facsimile signature in ink under the hand and seal of the body builder.
