Forward Moving Vibrating Plate LF 82 Operation ...

1 Forward Moving Vibrating PlateOperation & MaintenanceEngine:Honda G200 These instructions apply from PIN (S/N):We reserve the right to change specifications without in THIS MANUALAVAILABLE FORFUTURE USELF 82 ILF082 GEN3, August 2001LF 82: *28200082*The LF 82 is the ideal Forward Plate for contractors looking for equipment requiring minimum service andinvestment, while demanding high performance for repair jobs and maintenance on machine features compact design and a robust, wear-resistant bottom Plate allowing optimumproduction ability. The high frequency gives the LF 82 maximum drive and speed. This model also featureshigh centrifugal force and has proven to be especially efficient for compacting sand and granular LF 82 has a lifting handle on each side to facilitate easy Moving of the machine on-site. The foldinghandle contributes to excellent maneuverability and is also a practical feature for storage. The LF 82 ispowered by the reliable Honda G200 engine.

2 The throttle on the handle is another practical feature on thisuser-friendly Forward - Moving Plate . Like all other machines that are powered by a combustion engine, theLF Plate is designed for Operation in well-ventilated 82 ILF082 GEN3 The safety instructions are included in thismanual and must be studied by the follow the safety rules and keep themanual available for future through the entire manual beforestarting any maintenance good ventilation (air extraction) if theengine is run Indicates danger or hazardousprocedure that could result in serious or fatalpersonal injury if the warning is Indicates danger or hazardousprocedure that could result in damage tomachine or property if the warning is SYMBOLSSAFETY INSTRUCTIONSPageGeneral .. 3 Machine Plate .. 3 Safety instructions (For all Light products) .. 4-6 Safety when driving .. 7 Safety decals, Location/Description .. 8, 9 Fuel and lubricants .. 10 Technical data .. 11 Technical data Dimensions.

3 12 Operation .. 13-15 Lifting, transportation and towing .. 16 Maintenance - Service points .. 17, 18 Maintenance Every 10 hours of Operation .. 19 Maintenance Every 50 hours of Operation .. 20 Maintenance Every 100 hours of Operation .. 21, 22 Maintenance Every 500 hours of Operation .. 233LF 82 ILF082 GEN3 GENERALFill in all data below, when delivering andcommissioning the Engine ModelEngine NumberIt is important that the machine is maintained correctly toensure proper function. It should be kept clean so thatany leakage, loose bolts and loose connections can bediscovered in a habit of inspecting the machine every day beforestarting up by checking all round it to detect any sign ofleakage or other A THOUGHT FOR THE ENVIRONMENT!Do not let oil, fuel and other environmentallyhazardous substances contaminate the environ-ment. Always dispose of used filters, drained oiland any remaining fuel manual contains instructions for periodic attentionwhich should normally be carried out by the are additional instructions relating to theengine, for which the manufacturer s instructionsare detailed in the engine PLATEL000036B4LF 82 ILF082 GEN3 SAFETY INSTRUCTIONS (FOR ALL LIGHT PRODUCTS)SAFETY INSTRUCTIONS (FOR ALL LIGHT PRODUCTS)SymbolsThe signal words WARNING and CAUTION used in the safety instructions have thefollowing meanings:WARNING: Indicates danger orhazardous procedure that couldlead to serious or mortal injury ifthe warning is : Indicates danger or haz-ardous procedure that could lead tomachine or property damage if thewarning is rules for your safetyThe machine must not be modifiedwithout the prior consent of the ma-nufacturer.

4 Use only original only the accessories recommen-ded by Dynapac. If modifications notapproved by Dynapac are carried out,these could result in serious injury toyourself or other personnel. These recommendations are based oninternational safety standards. You must also observe any local safetyregulations which may be in force. Read allinstructions carefully before operating themachine. Keep the instructions in a safe place. Signs and stickers giving important informationabout safety and maintenance are suppliedwith every machine. Make sure that they arealways legible. The ordering numbers for newstickers can be found in the spare parts list. Use of the machine and its accessories isrestricted to the applications specified in theproduct literature. For reasons of product safety, the machinemust not be modified in any way. Replace damaged parts all wear parts in good alertAlways pay attention to what you are doing, anduse your common sense.

5 Do not use the ma-chine if you are tired or under the influence ofdrugs, alcohol or other substances which caneffect your vision, reaction ability or equipmentLong exposure to loud noise withoutear protectors can cause permanentdamage to exposure to vibrations can dam-age the hands, fingers and wrists. Donot use the machine if you experiencediscomfort, cramp or pain. Consult adoctor before resuming work with use approved safety equipment. Theoperator, and people in the immediate vicinity ofthe working area, must wear: Safety helmet Safety goggles Ear protectors Dust mask in dusty environments High-visibility clothing Protective gloves Protective shoesAvoid wearing loosely fitting clothing that mightget caught in the machine. If you have long hair,cover it with a hair net. Vibrations from hand-heldmachines are transmitted into the hands via thehandles of the machine. Dynapac machinesfeature a handle design that absorbs a large partof the machine vibrations.

6 The vibrations are noteliminated entirely, but it is possible to use themachines for longer periods of time without therisk of areaDo not use the machine near flammable materialor in explosive environments. Sparks can beemitted from the exhaust pipe, and these canignite flammable material. When you take a pauseor have finished working with the machine, do notpark it on or near flammable materials. The ex-haust pipe can get very hot during Operation , andcan cause certain material to ignite. Make surethat there are no other personnel inside the work-ing area while the machine is in use. Keep theworksite clean and free of extraneous the machine in a safe place, out of unau-thorized s reach, preferably in a locked 82 ILF082 GEN3 SAFETY INSTRUCTIONS (FOR ALL LIGHT PRODUCTS)Always take extreme care when dri-ving the machine on slopes. Alwaysdrive straight up and down on not exceed the maximum grada-bility of the machine according to theinstruction book.

7 Stay clear of mach-ine when operating on a slope or in not touch the engine, the exhaust pipe orthe eccentric element of the machine. Theygets very hot during Operation and can causeburn not touch V-belts or rotating parts the machine on ground as level and firmas possible. Before leaving machine: Apply the parking brake. Shut off the engine and pull the ignition remain under or in theimmediate vicinity of the machinewhen it is lifted by a crane. Only usemarked lifting points. Always makesure that all lifting devices aredimensioned for the weight of work must only be carried out byskilled personnel. Keep unauthorized personsaway from the machine. Do not carry out mainte-nance work while the machine is Moving or theengine is with fuel (Gasoline/diesel)Petrol has an extremely low flash-point and can be explosive in certainsituations. Do not smoke. Make surethat worksite ventilation is away from all hot or spark-generatingobjects when handling fuel.

8 Wait until the ma-chine has cooled before filling the tank. Fill thetank at least 3 metres away from where youintend to use the machine. Avoid spilling petrol,diesel or oil on the ground. Protect your handsfrom contact with petrol, diesel and the tank cap slowly to release anyoverpressure that might exist in the tank. Donot overfill the tank. Inspect the machine forfuel leakage not use a machine that is leaking the machineBefore starting read instructionbook and make your self familiarwith the machine and make surethat: All handles are free from grease, oil and dirt. The machine does not show any obviousfaults. All protective devices are securely fastened intheir places. All control levers in neutral the machine according to the your feet well clear of not operate the machine inpoorly ventilated spaces. There is arisk of carbon monoxide the machine only for the purpose for whichit is intended. Make sure you know how to stopthe machine quickly in the event of an emer-gency 82 ILF082 GEN3 SAFETY INSTRUCTIONS (FOR ALL LIGHT PRODUCTS)Working with the hydraulic systemRegular maintenance of the hydraulic system isimportant.

9 Minor damage or a split hose orcoupling can have devastating in mind that the hydraulic hoses are madeof rubber and can deteriorate with age, whichcan result in splitting. In all cases of uncertaintywith regard to durability or wear, replace thehoses with new original hoses from with batteryThe battery contains poisonous and corrosivesulphuric acid. Wear protective glasses andavoid getting acid on your skin, clothes or on themachines. If you get sulphuric acid on yourself,rinse the skin with water. If you get acid in youreyes, rinse them with water for at least 15minutes and seek immediate medical gas that is emitted by the battery is explo-sive. When fitting or replacing a battery, alwaystake care so that you do not short- circuit thebattery use a machine that is damaged. Qualifiedrepair work requires trained personnel, pleasecontact your nearest authorized firesIf there is a fire in or on the machine, it is bestto use an ABE-class fire , a BE-class CO2 extinguisher is 82 ILF082 GEN3 SAFETY WHEN DRIVINGMax 20 or 36%SlopesDriving on slopesL000100 AMax 20 or 36%L000099 ATipping angle on side slopesWhen driving near an edge, at least two thirds of theplate must be on firm solid sure that the work site is safe.

10 Wet and looseearth reduces manoeuvrability especially on slopingground. Always observe particular caution on slopingand uneven possible, avoid all driving across aslope. Instead, drive up and down on slop-ing work on slopes that are greater than the capabil-ity of the machine. Maximum slope of the machine inoperation is 20 (depending on condition of theground).The tilting angle is measured on a hard, level surfacewith the machine stationary. Vibration switched OFFand all tanks full. Remember that loose ground, vibra-tion switched ON, and driving speed can all cause themachine to topple even on a smaller slope than speci-fied leave the machine unattended withthe engine near an edgeAt least2/3 Machine location when operatingon edgesL000098A8LF 82 ILF082 GEN3 SAFETY DECALS, LOCATION/DESCRIPTIONL000033A2354619LF 82 ILF082 GEN3 SAFETY DECALS, LOCATION/DESCRIPTIONThe operator must read thesafety manual , and theoperation and maintenanceinstructions before using , hand and armentanglement.