Friday, August 31, 2007 Panlite® L-1225Z 100 Teijin …

1 Friday, August 31, 2007 Panlite L-1225Z 100 Unit System:EnglishTeijin Kasei america , Inc. ( Teijin Chemicals) -PolycarbonateActionsLegend (Open) General InformationGeneral Material StatuslCommercial: ActiveAvailabilitylAsialEuropelNorth AmericaTest Standards AvailablelASTMlISOF eatureslUV Resistance, GoodlViscosity, LowUseslAutomotive ApplicationslGeneral Purpose lLenseslParts, Transparent or TranslucentAppearancelClearFormslPellets Processing MethodlInjection Molding ASTM and ISO Properties 1 PhysicalNominal ValueUnitTest MethodDensity -Specific gr 23/23 ISO 1183 Melt Volume-Flow Rate (MVR) (300 kg) /10minISO 1133 Mold Shrink, to Shrink, to Shrinkage ISO 294-4(Across Flow) to (Flow) to Water Absorption @24 hrs (73 F) Absorption 24 62 MechanicalNominal ValueUnitTest MethodTensile Modulus309000psiASTMD638 Tensile Modulus 2348000psiISO 527-1, -2 Tensile Strength @Yield9140psiASTMD638 Tensile Stress at Yield 38850psiISO 527-1, -2 Tensile Strength @Break11200psiASTMD638 Tensile Elongation Strain at Yield 527-1, -2 Tensile Elongation @Brk140%ASTMD638 Nominal Tensile Strain at Break 350%ISO 527-1, -2 Flexural Modulus328000psiASTMD790 Flexural Modulus 4348000psiISO 178 Flexural Strength 413600psiISO 178 Flexural Strength @Yield13500psiASTMD790 Compressive Strength11000psiASTMD695 ImpactNominal ValueUnitTest MethodCharpy Notched Impact lb/in ISO 179 Charpy Unnotched Impact StrengthNo Breakft lb/in ISO 179 Notched Izod Impact ASTMD256( in) lb/in ( in) lb/in HardnessNominal ValueUnitTest MethodRockwell Hardness (M-Scale)

2 77 ASTMD785 ThermalNominal ValueUnitTest MethodDTUL @66psi - Unannealed286 FASTMD648 HDT B ( MPa) Unannealed286 FISO 75B-1, -2 DTUL @264psi - Unannealed268 FASTMD648 Page 1 of 2 Teijin Kasei america , Inc. ( Teijin Chemicals) Panlite L-1225Z 100 Polycarbonate8/31/2007 A ( MPa) Unannealed262 FISO 75A-1, -2 Vicat Softening Temperature (B50 (50 C/h 50N))298 FISO 306 CLTE, FASTMD696 Coefficient of Linear Thermal Expansion, FISO 11359-1, -2 CLTE, FASTMD696 Coefficient of Linear Thermal Expansion, FISO 11359-1, -2 ElectricalNominal ValueUnitTest MethodSurface +15ohmsIEC 60093 Volume +18ohm cmASTMD257 Volume +15ohm cmIEC 60093 Dielectric Strength ( in) 5762V/milASTMD149 Dielectric Constant ASTMD150(60 Hz) (1E+6 Hz) Dissipation Factor ASTMD150(60 Hz) (1E+6 Hz) Dissipation Factor IEC 60250(100 Hz) (1E+6 Hz) Arc Resistance110secASTMD495 Comp Track Index250 VIEC 60112 Electric Strength760V/milIEC 60243-1 Relative Permittivity IEC 60250(100 Hz) (1E+6 Hz) FlammabilityNominal ValueUnitTest MethodFlame Rating - UL UL 94( in)

3 HB ( in)V-2 UL 746 Nominal ValueUnitTest MethodRTI Str ( in)257 FUL 746 RTI Imp ( in)239 FUL 746 RTI Elec ( in)257 FUL 746 Comparative Tracking Index (CTI)300 VUL 746 OpticalNominal ValueUnitTest MethodRefractive ASTMD542 Transmittance (118 mil) PropertiesElectric Strength, IEC 60243-1, Short Time Test: 30 MV/m Notes1 Typical properties: these are not to be construed as in/min5 Method C (Slow Rate-of-Rise) Teijin Kasei america , Inc. (770)346-8949 Copyright , 2007 IDES-One Source. Plastics information presented on this data sheet was acquired by IDES fromvarious sources, including the producer of the material andrecognized testing agencies. In some cases, material updates have been integrated directly into the IDES Plastics Database by thematerial producer utilizing theData Maintenance Tool. IDES makes substantial efforts to assure the accuracy of this data.

4 However,IDES assumes no responsibility for the data values and urges that upon final material selection, data points are validated with 2 of 2 Teijin Kasei america , Inc. ( Teijin Chemicals) Panlite L-1225Z 100 Polycarbonate8/31/2007