G1000 Student Revision History G1000 Version 1

1 G1000 Student Revision History G1000 Version Internal maintenance release. Latest Waas and approach data. Included. G1000 Version Support for P3D Version 4 Improved user holds Fixed OBS issue Selecting aircraft in G1000 changes aircraft in P3D, and works opposite as well. Latest Waas and approach data. Included. G1000 Version Small bug fixes for P3D V4 Improved holds, proc turns and tracking related to these items. G1000 Version Corrected user reported issues. Changed aircraft flap configurations G1000 Version Corrected user reported random crashes. G1000 Version Reported user issues corrected.

2 New improved interface design for main application Latest Waas and approach data. Included. Revised user manual that includes addendum for new user interface changes. Pro Version includes change that allows the F1tech 1000 to exit the software via pressing vol. knob. G1000 Version Internal maintenance release. G1000 Version Corrected No Wind Data while on ground. Corrected vector track information. Added approach selection from nearest page. Fixed the radio altitude display showing in Cessna prop aircraft Added hardware support for GMC705/GCU478 Added second PFD Commercial plug-in option.

3 Heading bug sync. FLC mode on takeoff - Corrected pitch down when climbing. Ability to disconnect VNAV mode. Latest Waas and approach data. Included. G1000 Version Correct skewed moving map on flight plan page. Corrected issues for upgrade kit. Latest Waas and approach data. Included. G1000 Version Internal maintenance build. G1000 Version Correct a few approach issues reported by customers Added support for upcoming Citation Mustang and Cessna 208 upgrade kits. G1000 Version Correct certain throttle issues reported by customers Latest waas approach data included. G1000 Version Support for Lockheed Martins Prepar3D and connection problems You must reinstall the network module installer on the Simulator machine.

4 Corrections to F1tech Cirrus SR20 SR22 Plug-in Latest waas approach data included. G1000 Version Support for Lockheed Martins Prepar3D You must reinstall the network module installer. Added support for F1tech Cirrus SR20 SR22 Plug-in Fixed issue with Navigraph data changes. Latest waas approach data included. G1000 Version Fixed the wind vector option 1 calculations. Added support for F1tech GFC 710 autopilot hardware. Improved stability when running the G1000 alongside Orbx scenery Latest waas approach data included. G1000 Version Internal maintenance build. G1000 Version General bug fixes in all aspects of the software + fixed some approach problems.

5 Latest waas approach data included. G1000 Version General bug fixes in all aspects of the software + fixed some approach problems. Fix for crash with new Navigraph data update. G1000 Version General bug fixes in all aspects of the software + fixed some approach problems. Added to G1000 root folder. Editing as per below: [PFD] VFRCodeEurope = 1 Sets the transponder to 7000 when the default value softkey is pressed. G1000 Version Improved menu system. Extended runway centerlines selectable via the menu. Other user reported fixes. Improved user interface. G1000 Version Added a checkbox to not show the message again: The warning box if an F1tech approved aircraft is not selected.

6 G1000 Version The simulator will now advise with a warning box if an F1tech approved aircraft is not selected. Refined logic when selection of an arrival after already selecting an approach and Better management of deleting waypoints/procedures. G1000 Version Internal maintenance build. G1000 Version Corrected reports of missing airspaces. G1000 Version Various reported fixes Corrected a problem with identifying some joysticks Support for new Safer-Taxi plugin available via Flight1tech website. G1000 Version Various reported fixes Now includes the G1000 Control Center interface.

7 This app allows you too easily. Access tools, options and documents from an easy to use interface. Course to DME distance problem corrected. G1000 Version Adds supported aircraft flight model installers for FSX and P3D The aircraft do not display 3D exterior models or virtual cockpits but are selectable and flyable in FSX and P3D. Added current WAAS and Obstacle data. (this will be subscriber based in the future) Added the MFD Flightplan WIDE View , this is accessed from the VIEW sub-menu of the FPL pop-up. This is a G1000 V12 feature. Added the MFD Flightplan distance option to show cumulated distance instead of leg to leg, this is accessed from the VIEW sub-menu of the FPL pop-up.

8 Fixed a bug when a duplicate approach point was found incorrectly in a procedure. Fixed ETA calculation for the MFD top menu labels. When flying in Europe, the first letter of the scratchpad starts with an L instead of a K G1000 Version In the MFD approach page, the Enter button now changes from the ident field to the approach. The countries Poland and Portugal were mixed up when displaying information. Baron B58 plug-in interface graphic was missing. G1000 Version Various reported fixes. Added core support for additional and upcoming specific aircraft plug-ins. Changed optional switch panels adding better support for singles and twins.

9 Added optional alignment grid for moving and sizing windows more accurately. Added window size and location information on title bar when window borders are enabled. Added new generic airspeed indicator for twin aircraft configurations. G1000 Version Internal maintenance build. G1000 Version When loading an approach that has altitude constraints, the first waypoint now prefills with the correct value. STD Baro is displayed in the altimeter box when the softkey from the PFD menu is used. ACT Leg softkey on the MFD FPL page is working correctly, along with the ACT Leg menu option which now turns grey when a waypoint is not selected.

10 G1000 Version Altitude Alerter defaults to disabled The Autopilot will now fly nav source VOR2 when selected. Other minor fixes. G1000 Version Support for Lockheed Martins Prepar3D Version G1000 Version Numerous approach fixes and tweaks. New WAAS data set. Added Go Around mode option in the - Users can define their hardware device button to call Go Around mode. (located in network module folder) Further Refined VNAV functionality and added Altitude constraints for Procedures. Approach profiles are now rendered on the MFD when selecting or sorting through approaches. G1000 Version Internal maintenance build.