Transcription of G1750 Eye/Face Wash, Wall Mounted, Stainless …
1 Eye/Face WashesGuardian Equipment 312 447 8100 TELEPHONE 1140 N North Branch St 312 447 8101 FACSIMILE Chicago, IL 60642 8116. Units have been tested to and comply with ANSI and the Uniform Plumbing Code. FG1750 Eye/Face Wash, Wall mounted , Stainless Steel BowlApplication: Eye/Face wash with Stainless steel bowl for wall mounting. Two large FS-Plus spray-type outlet heads deliver a flood of water for rinsing eyes and Head Assembly: Two FS-Plus spray heads. Each head has a flip top dust cover, internal flow control and filter to remove impurities from the water : 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE : 11-1/8" diameter Stainless : Heavy duty cast aluminum wall bracket with corrosion resistant powder coated : 1/2" NPT female : 1-1/4" NPT female : ANSI-compliant identification Assurance: Unit is completely assembled and water tested prior to Options FBC Stainless steel bowl cover. Cover protects unit against contaminants.
2 Cover is automatically raised when unit is activated. FHS Auxiliary hand-held drench hose for rinsing eyes, face or body. FT Chrome plated brass tailpiece and trap with 1-1/2" IPS waste connection. FTP 1-1/2" OD chrome plated brass tailpiece. FG3600LF Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Refer to Tempering Valves section for complete technical and product selection SPACE FOR ARCHITECT/ENGINEER APPROVALDue to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are 1/4" (6mm). Eye/Face WashesGuardian Equipment 312 447 8100 TELEPHONE 1140 N North Branch St 312 447 8101 FACSIMILE Chicago, IL 60642 8116. Units have been tested to and comply with ANSI and the Uniform Plumbing IncludedEyewash FG1750 Eye/Face Wash, Wall mounted , Stainless Steel Bowl(203mm)(117mm)4 5/8"(178mm)BRASS STAY-OPEN BALL VALVE1/2" IPS CHROME PLATED7"FEMALE OUTLET1-1/4" NPT(165mm)6 1/2"(283mm) 11 1/8" Stainless STEEL BOWL(133mm)5 1/4"6 1/2"(165mm)8"(124mm)4 7/8"ALUMINUM FLAG HANDLEPOWDER COATED CASTSPRAY HEADS(2) FS-PLUS 4 7/8"(124mm)1/2" NPTFEMALE INLETPOWDER COATED CAST ALUMINUM WALL FS-PLUS SPRAY HEAD HAS A "FLIP-TOP" DUST COVER, INTERNAL FLOW CONTROL AND FILTER TO REMOVE IMPURITIES FROM THE WATER SHOULD BE INSTALLED SUCH THAT WATER FLOW PATTERN IS POSITIONED BETWEEN33" AND 53" ABOVE AMOUNTING BRACKET3 1/4"(83mm)3 1/4"(83mm)(3) 3/8" MOUNTING HOLES(SEE DETAIL A)rev.
3 081018
