熱伝導性パッド製品 Gap Filler Product Line

1 Global solutions: local supportTMInnovative Technology for a Connected World Gap Filler Product line .. - 50psi 50% W/mK - : + : + : + . AV Innovative Technology for a Connected WorldData for design engineer guidance only.

2 Observed performance varies in application. Engineers are reminded to test the material in 0109 Our customers are reminded that they bear the responsibility for testing Laird Technologies materials for their proposed use. Any information furnished by Laird Technogies and its agents is be-lieved to be accurate and reliable, but our customers must bear all responsibility for the use and application of Laird Technologies materials since Laird Technologies and its agents cannot be aware of all potential use. Laird Technologies makes no warranties as to the fitness, merchantability, or suitability of any Laird Technologies materials or products for any specific or general uses.

3 Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies domestic terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. A15561-00 Rev A, 2/05/07 2009 All Rights Reserved. Laird Technologies is a registered trademark of Laird Technologies, Filler Product LineT-FLExTM 200V0T-FLExTM 300T-FLExTM 500T-FLExTM HR600 PRELIMINARYT-FLExTM 600T-FLExTM 700 PRELIMINARYT-PuTTYTM 502T-PuTTYTM 504T-PLITM 200 TEST METHODC onstruction & CompositionCeramic filled silicone sheetCeramic filled silicone sheetCeramic filled silicone sheetCeramic filled silicone sheetBoron nitride filled silicone sheetCeramic filled silicone sheetReinforced boron nitride filled silicone sheetCeramic filled dispensable silicone gelBoron nitride filled silicone sheetColorLight GrayLight GreenBlueGreyBlue-VioletDark GreyWhiteLight GrayMultiple

4 ColorsVisualThickness ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )Thickness Tolerance+/- 10%+/- 10%+/- 10%+/- 10%+/- 10%+/- 10%+/- 10%N/A+/- 10% g/ccHelium PycnometerHardness45 Shore 0020 Shore 0040 Shore 0035 Shore 0025 Shore 0050 Shore 005 Shore 00N/A70 Shore 00 ASTM D2240 Tensile Strength48 psi15 psi66 psiPending15 psiPendingN/AN/A35 psiASTM D412% Elongation635057 Pending75 PendingN/AN/A5 ASTM D412 Outgassing TML (Post Cured) (not post cured) E595 Outgassing CVCM (Post Cured) (not post cured) E595uL Flammability Rating94 V094 V094 V094 V094 V094 V094 V094 V094 HBE180840 Temperature Range -45 C to 160 C-40 C to 160 C-45 C to 200 C-45 C to 200 C-45 C to 200 C-45 C to 200 C-45 C to 200 C -45 C to 200 C -45 C to 200 CThermal W/mKHot diskThermal Resistance @ 40 mils, 20 psi @ 1mm, C-in2/W C-cm2 C-in2/W C-cm2 C-in2/W C-cm2 C-in2/W C-in2 C-in2/W C-cm2 C-in2/W C-in2 C-in2/W C-cm2/WN/A C-in2/W C-cm2/WASTM D5470 (modified)Percent Deflection @ 10 psi5%21%10%10%20%15%25%N/A4%ASTM D575 (modified)

5 Percent Deflection @ 50 psi25%48%30%42%40%32%50%N/A6%ASTM D575 (modified)Percent Deflection @ 100 psi40%61%45%58%60%50%75%N/A10%ASTM D575 (modified)Thermal Expansion229 ppm/ C754 ppm/ ppm/ C217 ppm/ C430 ppm/ C340 ppm/ C92 ppm/ CN/A51 ppm/ CIPC-TM-650 Voltage>250 VAC/mil>250 VAC/mil>200 VAC/milPending>200 VAC/mil>200 VAC/mil>200 VAC/mil>500 VAC/mil>150 VAC/milASTM D149 Volume Resistivity4 x 1013 ohm-cm 6 x 1012 ohm-cm1x 1013 ohm-cm9 x 1013 ohm-cm 2 x 1013 ohm-cm1x 1013 ohm-cm5 x 1013 ohm-cm>1014 ohm-cm5 x 1013 ohm-cmASTM D257 Dielectric Constant @ D150