Example: confidence

GDO-2 SecuraLift GARAGE DOOR OPENER

AUTOMATIC TECHNOLOGY AUSTRALIA PTY LTDGDO-2 SecuraLift GARAGE DOOR OPENEROWNERS COPYW arning: It is vital for the safety of persons to follow all instructions. Failure to comply with the installation instructions and the safety warningsmay result in serious personal injury and/or property and remote control OPENER save these instructions for future InstructionsNNEEWWALPSA utomatic LimitsPositioning SystemNNEEWWALPSA utomatic LimitsPositioning SystemTABLE OF CONTENTS2 Safety Door The OPENER - Track Type The OPENER - Spring Type Brackets And Assembling Limits Via Control Limits Via Obstruction Force Margin (ISS)..Coding Transmitters ..Connecting Photo Electric Auto-Close Courtesy Light Pet Mode Door Opening Door Status and Default Shooting SAFETY INSTRUCTIONSA utomatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties, statutoryor otherwise which may be implied by laws as conditions or warranties of purchase of an Automatic Technology Australia Pty Ltd GARAGE Door Technology Australia Pty Ltd hereby further expressly excludes all or any liability for any injury, damage, cost, expense or claimwhatsoever suffered by any person as a result whether directly or indirectly from failure to install the Automatic Technology Australia Ga

and mechanisms prior to installation of the opener. Connect the garage door opener to a properly EARTHED general purpose 240V mains power outlet installed by a qualified electrical contractor. DISCONNECT THE POWER CORDfrom mains power before making any repairs or removing covers. Only EXPERIENCED service personnel should

Tags:

  Installation, Doors, Garage, Reopen, Garage door opener

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of GDO-2 SecuraLift GARAGE DOOR OPENER

1 AUTOMATIC TECHNOLOGY AUSTRALIA PTY LTDGDO-2 SecuraLift GARAGE DOOR OPENEROWNERS COPYW arning: It is vital for the safety of persons to follow all instructions. Failure to comply with the installation instructions and the safety warningsmay result in serious personal injury and/or property and remote control OPENER save these instructions for future InstructionsNNEEWWALPSA utomatic LimitsPositioning SystemNNEEWWALPSA utomatic LimitsPositioning SystemTABLE OF CONTENTS2 Safety Door The OPENER - Track Type The OPENER - Spring Type Brackets And Assembling Limits Via Control Limits Via Obstruction Force Margin (ISS)..Coding Transmitters ..Connecting Photo Electric Auto-Close Courtesy Light Pet Mode Door Opening Door Status and Default Shooting SAFETY INSTRUCTIONSA utomatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties, statutoryor otherwise which may be implied by laws as conditions or warranties of purchase of an Automatic Technology Australia Pty Ltd GARAGE Door Technology Australia Pty Ltd hereby further expressly excludes all or any liability for any injury, damage, cost, expense or claimwhatsoever suffered by any person as a result whether directly or indirectly from failure to install the Automatic Technology Australia GARAGE Door Openerin accordance with these installation ADDITIONALSAFETY protection weSTRONGLY recommend the fitting of a Photo ElectricBeam.

2 In most countries Photo Electric Beams aremandatory on all GARAGE doors fitted with automaticopeners. For a small additional outlay ATA recommendsthat Photo Electric Beams be installed with the automatic OPENER ensuring additional safety and peaceof NOToperate the GARAGE door OPENER unless thegarage door is in full view and free from objects such ascars and children/people. SERIOUS PERSONALINJURYand/or property damage can result from failureto follow this warning. DO NOToperate the GARAGE door OPENER whenchildren/persons are near the door. Children must besupervised near the GARAGE door at all times when thedoor OPENER is in use. SERIOUS PERSONALINJURYand/or property damage can result from failureto follow this NOTallow children to operate the GARAGE dooropener. SERIOUS PERSONAL INJURY and/orproperty damage can result from failure to follow check to make sure that the SAFETYOBSTRUCTION FORCEis working correctly, and isTESTED(by placing a 40mm high object on the floor)and set as per the installation Instructions to follow the manual could result in SERIOUSPERSONAL INJURYand/or property damage.

3 Thistest must be repeated at regular intervals and thenecessary adjustments made as NOTdisengage the door OPENER to manualoperation with children/persons or any other objectsincluding motor vehicles within the the wall switch or wall mounted transmitter in aLOCATION/POSITION where it is out of reach ofchildren and the GARAGE door is door OPENER is not intended for use by young children or infirm persons without adequate children should be supervised to ensure that theydo not play with the hands and loose clothing CLEARof the door anddoor OPENER at all - It is vital for the safety of persons to follow all instructions. Failure to complywith the following Safety Rules may result in serious personal injury and/or property unit should be installed so that it is protected fromthe elements. It should not be exposed to water or is not to be immersed in water or sprayed directly bya hose or other water carrying GARAGE door must be WELL or binding doors must be repaired by aqualified GARAGE door installer prior to OPENER examine the installation , in particularcables, springs and mountings.

4 DO NOTattempt torepair the door yourself as hardware is under extremetension and can cause SERIOUS PERSONALINJURYand/or property OR DISENGAGEall GARAGE doors locksand mechanisms prior to installation of the the GARAGE door OPENER to a properlyEARTHED general purpose 240V mains power outletinstalled by a qualified electrical THE POWER CORD from mainspower before making any repairs or removing EXPERIENCED service personnel shouldremove covers from the GARAGE door using auto close mode, a PHOTO ELECTRICBEAM must be fitted correctly and tested for operationat regular intervals. EXTREME CAUTIONis recommended when using auto close mode. ALLSAFETY RULES above must be order for the GARAGE door OPENER to SENSE an objectobstructing the door way, some FORCE must be exerted on the object. As a result the object, door and/orperson may suffer DAMAGE or the power supply cord is damaged, it MUST bereplaced by an ATA service agent or suitably sure that the door is fully open before driving inor out of the sure the door is fully closed before leaving FEATURESYour SecuraLift Automatic GarageDoor OPENER has many features whichyou will appreciate.

5 The componentsand materials used in this automaticopener are of the latest technology andhighest quality. Listed below are someof the many operate the door simply press thehand held transmitter, the wall mountedtransmitter, or optional wall switch fortwo seconds and the door willautomatically open or close. The doorcan be stopped during an opening orclosing cycle by pressing the buttonagain. The next actuation will move thedoor in the opposite CODEE very time a transmission is made fromthe remotetransmitter a new securitycode is generated. The number ofpossible code combinations is over This greatly enhances thesecurity of the system. Code grabbing is made a thing of the past. ALPS (AUTOMATIC LIMITSPOSITIONING SYSTEM)We have developed a revolutionarydoor travel limits stop system. TheALPS technology does away withmanual adjustment of the doors limitsposition using mechanical parts, forexample micro switches and ALPS technology automaticallycalculates the doors travel limits andstores it in memory.

6 If the door ismoved manually within the travel limitsduring a power failure, the ALPS willrecognise this once the power is restored and stop at the correct limitposition if the door is installation the hand heldtransmitter can be programmed to setthe door limits (INTELLIGENT SAFETYOBSTRUCTION SYSTEM) While the door is performing a closecycle, should it hit an obstacle or berestricted in some manner, it willautomatically reverse. The amount offorce the door should encounter beforereversing is automatically adjusted bythe doors control system during theinitial installation of the automatic dooropener. The door will also stop ifrestricted whilst opening. The SafetyObstruction Force should be checked atleast once a month. See installationmanual for CODE STOREThe SecuraLift GARAGE Door Openeruses state of the art technology instoring your selected transmitter security code.

7 Up to 23 differenttransmitters can be stored in the LOAD INDICATORWhen the maximum opening and closing capacity of the OPENER isexceeded an audible beeper will soundto indicate that an overload COURTESY LIGHTThe courtesy light on the OPENER comeson automatically whenever the door isactivated. The light can also beswitched on and off without operatingthe door. This is done by pressing thebutton on any hand held or wall mounted transmitter which has beenstored with the light light willstay on for approximately three minutesthen switch off. This time is alsoadjustable. VACATION MODEA hand held transmitter can be programmed to lock and unlock allother transmitters that have beingprogrammed into the openers vacation mode can be used whenthe door is left idle for long periods (PEDESTRIAN) MODEThe hand held transmitter can beprogrammed to open the door partiallyso that the family pet can enter and exitthe GARAGE at any time.

8 You may alsowish to open the door to a height suitable only for pedestrian access. Thedoor opening position is also CLOSE MODEThe OPENER can be programmed toautomatically close after an open auto close time is adjustable. It iscompulsory to install a Photo ElectricBeam if this mode is selected, otherwisethe door may cause personal injury ordamage to ELECTRIC BEAM(OPTIONAL)The OPENER has an input for a photoelectric beam to be connected for extrasafety protection and use of the autoclose OPERATIONThe OPENER is equipped with a uniquemanual disengaging device. If thepower to the OPENER is disrupted for anyreason the door can be put into manualmode by pulling down on the stringhandle on an angle towards the will allow you to manually open orclose the door. to re-engage the openerpull the string handle away from CONTROLS1.

9 LIGHT CODE button (white) isused for storing or erasing thetransmitter button (code) you wish touse to switch the courtesy light on theopener on or CODING LED (red) light flasheswhen a code is being stored or when atransmitter button is DOOR CODE button (blue) is usedfor storing or erasing the transmitterbutton you wish to use to command thedoor to open, stop or DOOR STATUS LED (Yellow)5. CLOSE drive button (red) is usedduring installation to help set the closelimit position. Pressing and holding thisbutton will move the door in the closedirection. Movement stops when thebutton is : The close safety obstructiondetection is inoperable whenever theOpen or Close Drive button is used tomove CLOSE LIMIT LED (red) the ledis very helpful during installation . Itilluminates and flashes when the door isclosing and remains steady on when theclose limit position has been AUTO CLOSE TIME button(White) is used to adjust the auto closetime.

10 While holding in the auto closebutton and then pressing the openbutton the time is increased. Each presswill increase the time by 5 the close button will decreasethe SET button (yellow) is used duringthe installation phase together with theOpen and Close buttons to set the doorlimit positions. The Set button is alsoused to re-initialise the OPENER . 9. O/S/C button (Yellow) is usedduring installation to test the open, stopand close cycles for the OPENER . Theopener has to be initialised by the Resetbutton before the O/S/C button OPEN DRIVE button (green) isused during installation to help set theopen limit position. Pressing and holding this button will move the doorin the open direction. Movement stopswhen the button is : The open safety obstructiondetection is inoperable whenever theOpen or Close Drive button is used tomove OPEN LIMIT LED (green) theled is very helpful during installation .


Related search queries