Gear Oil Lubricants API GL-1 SAE 90, 140 and 250

1 February 2015 Revision: 11 Page 1 of 2 PRODUCT DATA SHEET AUTOMOTIVE DIVISION Transmission and Torque Fluids gear Oil Lubricants API GL-1 SAE 90, 140 and 250 Comercial Roshfrans, de Av. Oth n de Mendiz bal Ote. 484 Col. Nueva Industrial Vallejo 07700 Del. Gustavo A. Madero M xico, Tel. (55) 5747 5700 Fax (55) 5747 5742 This technical document is subject to changes without further notice. For consulting the latest version please contact our Product Engineering Department or the official web site. Roshfrans gear Oil Monograde exceeds the requirements of the service category API GL-1 for optimal non extreme pressure protection when Original Equipment Manufacturers (OEM) recommend a straight mineral oil for automotive and industrial applications. Roshfrans gear Oil are high technology products which combine a perfect balance of highly refined paraffinic base stocks and one of the latest additive s technologies to assure extended gear life.

2 It is ideal to be used in passenger cars, light trucks, commercial fleets, and other off-highway applications requiring a lubricant with API Service Category GL-1. PROPERTIES AND CUSTOMER Roshfrans gear Oil is designed to provide optimal wear protection due to its excellent low friction properties extending its durability during the most adverse operation conditions. Assures a longer life to spiral bevel, helical and spur gears, bearings and seals, and other transmission components for automotive and industrial applications. High viscosity index and low pour points assure a good film strength providing an outstanding gear protection within a wide range of temperatures. Excellent thermal stability allows a minimum viscosity loss and oil degradation at any working condition. gear lubricant with an excellent oxidation resistance reducing oil thickening, sludge, and varnish formation due to high operation temperatures.

3 Convenient viscosity behavior under any load or temperature regime. Suitable gear protection at high-low speeds as well as in high-low torque operations. A defoaming additive prevents air entrapment reducing oil oxidation even in the presence of copper or bronze. Roshfrans gear Oil is recommended for its use in spiral bevel and double reduction gears, manual transmissions, flexible couplings, tractor transmissions and final drives requiring a straight mineral lubricant - API Service Category GL-1. Roshfrans gear Oil can be used in equipment operating over a broad range of temperature according to SAE J306 Viscosity Specification. Roshfrans gear Oil is also suitable for lubrication of any equipment where copper or bronze is present and susceptible to be attacked by oils containing sulphur-phosphorus compounds (extreme pressure additives). These products are not to be used to lubricate hypoid gears.

4 Roshfrans gear Oils meet or exceed performance specifications for: API Service Category GL-1. HEALTH AND This product is not expected to produce adverse effects on health when used for its intended application. Avoid prolonged contact with used oil. Continuous contact with used oil has caused skin cancer in lab animals. Wash skin thoroughly with soap and water. Maintain your work clothes and maintenance areas as clean and orderly as possible. Lubricant containers must be kept clean and well covered. Store them in shady areas to counteract product contamination. Do not pollute. Disposed of used Lubricants in accordance with local, state, and federal guidelines. Keep this product out of reach of children and animals. For any doubt regards Roshfrans Lubricants and their applications, please contact our Technical Support Department. For further information about security and hygiene aspects request the corresponding Material Safety Data Sheet from your local sales representative.

5 February 2015 Revision: 11 Page 2 of 2 PRODUCT DATA SHEET AUTOMOTIVE DIVISION Transmission and Torque Fluids gear Oil Lubricants API GL-1 SAE 90, 140 and 250 Comercial Roshfrans, de Av. Oth n de Mendiz bal Ote. 484 Col. Nueva Industrial Vallejo 07700 Del. Gustavo A. Madero M xico, Tel. (55) 5747 5700 Fax (55) 5747 5742 This technical document is subject to changes without further notice. For consulting the latest version please contact our Product Engineering Department or the official web site. TYPICAL TEST . ASTM D METHOD TYPICAL VALUE SAE Grade SAE J306 90 140 250 Apperance at Room Temperatura Visual Bright Bright Bright ASTM Color 1500 Kinematic Viscosity @ 100 C, mm2/s (cSt) 445 Kinematic Viscosity @ 40 C, mm2/s (cSt) 445 Viscosity Index 2270 90 93 119 Density @ C, kg/L 1298 Flash Point, F ( C) 92 482 (250) 486 (252) 496 (258) Pour Point, F ( C) 97 10 (-12) 10 (-12) 16 (-9) Foaming Characteristics, ml/ml 892 Sequence I 0/0 0/0 0/0 Sequence II 0/0 0/0 10/0 Sequence III 0/0 0/0 0/0 Typical test data are average values only and is subject to change without further notification due to continual product research and development.

6 Minor variations which do not affect product performance are to be expected during normal manufacturing.